You can find parts and tools used in this video here: Seat cushion covers: ebay.us/wvM4MQ Trim removal tool kit: amzn.to/3dwVAeT (these are eBay and Amazon affiliate links).
Great vid. On my 06 ES 330, when I took the green heating pad off, I noticed it was connected to cushion with tiny red plastic connectors that were "H" shaped. Much like the the plastic that used to connect price tags to clothes, except these were much smaller in diameter, almost thread like. I can tell they were fastened with some sort of gun. I had to cut them to remove cushion as I replaced the cushion, can you tell me how to affix the heater pad back to the cushion so that it will be tight and wrinkle-free? thanks
@@DIYtimeTRD ok, i got a popping noise from the cushion rubbing on my lumbar and i wanted to see if i can remove the back panel to make adjustments in the cushion
Man. There are so many things to remove to get the cover off; I cannot possibly put the seat back together. Seeing this video, I'm impressed at the demonstrator's skill and how well made the seat is with the mechanical and electronics in it. Good tutoring video. Thanks
I just needed the passenger bottom seat cover replaced. The upper is in great condition. The shop i took it to wanted 450 to replace it. No thanks! It’s a 2010 with 300k miles on it. Purchased the seat replacement on eBay for 50 bucks. This tutorial will help!! Thanks so much
Thanks for the this detailed video. From my experience with my 2004 GS300 - YOU MUST MUST MUST REMOVE THE SEAT FROM THE CAR. First, take the headrest off of the seat, disconnect everything attached as shown in this video and then take the seat out to work on it elsewhere. There are a TON of hog rings that hold the seat cover to the padded frame beneath. Leave a lots of time to work on things because all those hog rings are a BITCH to get properly attached again!!! Other than that its laborious but rather simple overall.
Thanks for the guide, only issue I encountered was that one of the screws for the large plastic trim on the around the bottom of the seat could only be removed with a very tiny right angle adapter which I didn't have so the large trim was left hanging on during the removal and installation process. I think it was slightly different for me since I have a GS and your car looks like an IS. 😀
Do you think the same steps in this tutorial will apply to a 2020 Lexus NX300 F-Sport? I burnt a hole in my leather, and Im more than motivated to fix it myself after buying the OEM cover with cushion 😢
Any thought on why the power seat is not working now? I double checked connections before bolting the seat down but thought there might be a reset trick ? Great video btw. Walked me through my whole process and I have an rx 350. Heated seat part was a pain but worked out!
This video was helpful, but and it is a big but, it is much more difficult than what the poster conveys. Especially if you have heated seats. The "mat" that is the heated coil under the cover is very delicate and moves around a lot. The "rings" he shows are part of a wire rail system that basically has to be cut in order to get the cover off and then can't easily be put back in. You will get a semi-respectable look without them, but it won't be the nice factory look. I applaud the poster again, but forewarn MOST people will get into this and then be very unhappy as it is a lot of work for a NOT professional finished product.
@@lespala2772, I have to do the same. I already replaced the bottom and it was easy enough. Is there anything with the top you can advise on such as certain clips and whatnot?
i have a 2021 rx350 fsport the buttom cushion is uncofortable , do you rhink it is possible to change the cushion +cover of the buttom part with a luxury one and keep the rest of the seat?
I'm replacing my seat cover on my 21013 ES300H. The video has been excellent. When I removed the old cover it has three plugs coming out of it. I believe some of them are the electric seat warmer. I live in Florida and don't need this option. I'm concerned it may also be related to the seat belt alarm. Can I just leave the connections under the seat open?
You could, but I would recommend keeping it as close to original state as possible. Seats have various sensors related to safety and air bags systems. You don’t want to leave those unplugged.
There are beige ones either on Amazon or eBay... The link in the description sadly doesn't go to an actual eBay listing anyway, so it's Russian roulette on whether the one you order looks perfect like in this video or doesn't.
Depends how badly you want this fixed, or how much money you are willing to pay someone else to do this.... Mine has cooled seats and all cold air was blowing through that reap in the middle.... 😂 Let me say I was pretty motivated to fix this....
Excellent video however I am having a hard time visualizing how in the world you could access the passenger side of the seat to remove and reinstall while the seat is still in the car.
Great video. My 2007 RX350 seat heater malfunctions. When the heater is turned on. It generates burning smell. Is the heater metal pipes below the cushion in your video at ~6:00?
Can anyone kindly tell me if we can still order leather for the LS460 (2010) cars? The carwash guys ruined my backseats by scratching and leaving white scars and now I cannot even order leather seats for this model :-(
Your best bet is junk yards, then check on Facebook Marketplace if anyone parting out same car, then eBay, and as last resort fork out a bag of $$$ to the dealer.
Great video. Thanks, DIY-time. Where did you get those handy plastic tools to remove the plastic caps with ease? I will need to replace my front driver side bottom seat cushion. I will be watching your video several times....:) How much did you spend on the seat cover?
Thanks! I posted a link in the description under this video for the tools and seat cover. I was lucky and found my seat cover at the local junk hard for just $6! eBay is my second choice for used covers. Dealer wants something like $1000 a pop.
Hey there!! I hope you get this reply asp!! And respond quickly!, here is my problem: I have a 2019 Lexus ES350. Salesman said it was LEATHER when I found d out that it is NULUXE!!! I want to get LEATHER for the DRIVER side only. Here is the problem . The upholstery place said he could "replace only the INSERT ( seating and back rest area ONLY). I don't see how he could!!!! Looks like the ENTIRE SEAT WOULD BE ONE PIECE! The sides AND the middle part! Am I hmmm wrong? How could he replace ONLY that seating /back area?? Please hurry if you get this. Cause I was going to have him order the leather from a place in Cali. And have him do it. Thank you!!!!!!! The seats are VENTILATED. So he would have to get them PUNCHED.
It must be doable, cuz they can do it at the dealership on any car when people buy this as upgrade option, but it may require a bunch of stuff, like fan, wiring, control buttons, etc....
This video won't work for a 2008 Lexus ES 350 - the seat belt is attached to the seat and seat trim. There seems to be an extra screw somewhere to prevent the removal of the trim. Plus, you cannot remove the seat from the car easily, since the seat belt is attached to it. I didn't find any videos on the internet that show how to do the seat removal on an ES 350, so you're on your own.
very good instructional video. but why you just not tear off damaged leather from sew joints and add new one and then sew it under? i do many diys too, but to reassemble seat to change cover is little bit unnecessary. if you change other seats, speak with pro sewer or watch em in work, it is possible to sew leather underneath with unvisiable joints. but who disliked this video are the guys who work in seat change service point xd.
I don’t think you can sow it right on the seat. Unless you are pro and have the right tools. Which I’m not 😁... In my case the foam cushion was ripped and needed to be replaced too. And for that you absolutely have to take the seat apart.
Hi, can someone tell me if the replacement seat cushions are the same for both the drivers side and passenger side? Can you swap the drivers side and passenger side cushions over without any issues? Thanks
I found a used cover for like $6 at the local junk yard, but newer Lexus’ can be hard to find there sometimes. eBay is the next cheapest place. Brand new OEM covers are ridiculously expensive.
You can get a repair manual from Toyota if you dont mind spending $20. It should have that info. I got them here for my cars: techinfo.toyota.com/techInfoPortal/appmanager/t3/ti?_nfpb=true&_pageLabel=ti_home_page&contextType=external&username=string&password=secure_string&challenge_url=techinfo.toyota.com/techInfoPortal/login/techinfo&request_id=3204805765445699237&authn_try_count=0&locale=en_US&resource_url=https%3A%2F%2Ftechinfo.toyota.com%2F
You can find a few interesting designs here: rover.ebay.com/rover/1/711-53200-19255-0/1?ff3=4&pub=5575132837&toolid=10001&campid=5338538549&customid=&mpre=https%3A%2F%2Fwww.ebay.com%2Fsch%2Fi.html%3F_from%3DR40%26_trksid%3Dm570.l1313%26_nkw%3Dleather%2Bseat%2Bcovers%2Bfor%2B2010%2Blexus%2BRX%26_sacat%3D0
Fits perfectly rear-facing in our truck, which has a slightly smaller back seats. th-cam.com/users/postUgkx6_FKRYB2ClSPRyjcd8HptiCS3EiQoNX4 Feels as comfy and plush as our Graco Contender carseat
Thank you fur yer vid but that's why I don't drive sssshitty Japanese cars. "Next .. next .. next ..!" That's why I only drive Mercedes. There's not next next next. Btw, yer battery is dirty. Danke!
Please complete video showing the actual installation of new cover and how supplement compressed seat padding. Can you add some padding to heated seats or is that a fire risk? Thanks
You can find parts and tools used in this video here:
Seat cushion covers: ebay.us/wvM4MQ
Trim removal tool kit: amzn.to/3dwVAeT
(these are eBay and Amazon affiliate links).
Great vid. On my 06 ES 330, when I took the green heating pad off, I noticed it was connected to cushion with tiny red plastic connectors that were "H" shaped. Much like the the plastic that used to connect price tags to clothes, except these were much smaller in diameter, almost thread like. I can tell they were fastened with some sort of gun. I had to cut them to remove cushion as I replaced the cushion, can you tell me how to affix the heater pad back to the cushion so that it will be tight and wrinkle-free? thanks
This is one of the best tutorials on TH-cam. Very thorough and with good photography. I will use this when working on my GS300. THANKS.
Thank you!
@@DIYtimeTRD HOW DO U REMOVE THE DRIVER SEATBACK? I HAVE LOOKED EVERYWERE AND I CANT FIND HOW TO...I DONT WANNA BREAK THE CLIPS
Haven’t done mine yet, its still in a good shape.
@@DIYtimeTRD ok, i got a popping noise from the cushion rubbing on my lumbar and i wanted to see if i can remove the back panel to make adjustments in the cushion
@@liltony514 bro i got the same noise mine sounds like something is broke in da back of my seat 😤
Thanks! I was able to replace both front lower covers and cushions because of your video!
Man. There are so many things to remove to get the cover off; I cannot possibly put the seat back together. Seeing this video, I'm impressed at the demonstrator's skill and how well made the seat is with the mechanical and electronics in it. Good tutoring video. Thanks
You can do it!
Think seats are challenging? View some of the videos of guys that disassemble and reassemble wrist watches !
😁👍🏻
I tear down engines and put them back together after the rebuilding process. It's complicated.
I just needed the passenger bottom seat cover replaced. The upper is in great condition. The shop i took it to wanted 450 to replace it. No thanks! It’s a 2010 with 300k miles on it. Purchased the seat replacement on eBay for 50 bucks. This tutorial will help!! Thanks so much
Please share from where you buy the seat cover please, will appreciate a link. thanks
Thanks for the this detailed video. From my experience with my 2004 GS300 - YOU MUST MUST MUST REMOVE THE SEAT FROM THE CAR. First, take the headrest off of the seat, disconnect everything attached as shown in this video and then take the seat out to work on it elsewhere. There are a TON of hog rings that hold the seat cover to the padded frame beneath. Leave a lots of time to work on things because all those hog rings are a BITCH to get properly attached again!!! Other than that its laborious but rather simple overall.
👍🏻
Use good quality zip ties to replace the hog rings.
@@randyw4972 Hey Randy what type of zip tie do you recommend? Also how do you ensure they are in correct location?
@@ReidEvers you could mark with a marker where the old hog rings were. Use the thickest zip ties you can fit so they don't brake easily.
Awesome vid. Will Def pay the professionals to do this one for me...
Amazing quality, if I ever did a tutorial video this would be the standard. THANK YOU!
Thank you! It is helpful to take apart and add the cushion. Is there a video on how to reassemble it?
HOLY MOLY that is a lot of steps but you made the video look super easy that I"m not scared to do it.
Thanks for the guide, only issue I encountered was that one of the screws for the large plastic trim on the around the bottom of the seat could only be removed with a very tiny right angle adapter which I didn't have so the large trim was left hanging on during the removal and installation process. I think it was slightly different for me since I have a GS and your car looks like an IS. 😀
This is a very good video. Well done!! Excellent video angles, explanation, light and editing. Thanks for sharing!!!!
Thank you, I appreciate your feedback!
Excellent video tutorial, many thanks!!
AWESOME video! Anyone can follow this!! If you gave this video a thumbs down, you are a clueless person. Very, Very well done!!
Agree! 😎👍🏻
Thanks!
It’s helpful, and insane. You are amazing for being able to do this and put on tape. Well done. Solute.
That’s a lot of work! Thank you for your time in video taping this. I will definitely buy the professional handle this😅
Me, too!😂
Really good video thank you, needing to replace seat cover of drive side 2008 Lexus ES350. I will look around, thank you
Same car. How did it go? Looks like a lot of time to do this.
Great video. Thank you. Do you have a video on replacing the top of the lexus leather drivers seat.
What about the top part ? Please do tutorial on that part if you can
Great video! Very clear and concise. Thanks for posting.
My pleasure!
Very refreshing, a how to without the author acting like a Rock Star. Just straight to the point
Awesome tutorial. I need to do the same on my TSX.
Thanks!
Do you think the same steps in this tutorial will apply to a 2020 Lexus NX300 F-Sport? I burnt a hole in my leather, and Im more than motivated to fix it myself after buying the OEM cover with cushion 😢
Any thought on why the power seat is not working now? I double checked connections before bolting the seat down but thought there might be a reset trick ? Great video btw. Walked me through my whole process and I have an rx 350. Heated seat part was a pain but worked out!
Im not aware of any seat reset procedures. And mine worked right away after reassembly. Could be a blown fuse instead.
Thank you for the instructional video. It's very helpful.
Great video! Do you have one for the upper part (back) also?
Great tutorial. I have a quick question. Can I replace an RX350 seat with Sienna seat for driver and passenger?
I doubt. Every car is different and they rarely share same exact parts.
This video was helpful, but and it is a big but, it is much more difficult than what the poster conveys. Especially if you have heated seats. The "mat" that is the heated coil under the cover is very delicate and moves around a lot. The "rings" he shows are part of a wire rail system that basically has to be cut in order to get the cover off and then can't easily be put back in. You will get a semi-respectable look without them, but it won't be the nice factory look. I applaud the poster again, but forewarn MOST people will get into this and then be very unhappy as it is a lot of work for a NOT professional finished product.
Thanks for this realistic info. I am trying to find more information about the rail system. Any tips?
I found an extra bolt but I only removed the main 4 connecting to the seat. Must have been nothing :)
Thanks for sharing a great tutorial...sub'd :D
Awesome, thanks!
It took me 4 hours, those hog rings thou 😫. Thanks buddy
💪🏼
Did u use the same hog rings or replaced? How was that process?
Great tutorial!
Veel gehad aan deze video. Bedankt en als je nog eens wat doet, gewoon een filmpje van maken en uploaden 👍🏻
👌🏼 Will do!
About time. Thanks.
👍🏼
Is there a video or information on how to remove the top part of the seat too? I need to replace that one as well. Thanks
I haven’t had to do the top part on my car yet.
DIY-time just did it myself! Not hard. There were a couple of hog ties and clips.
Nice!
@@lespala2772, I have to do the same. I already replaced the bottom and it was easy enough. Is there anything with the top you can advise on such as certain clips and whatnot?
So say I'm at the junk and find a mint seat. How do I go about removing the 4 bolts since I can't move the seat?
i have a 2021 rx350 fsport the buttom cushion is uncofortable , do you rhink it is possible to change the cushion +cover of the buttom part with a luxury one and keep the rest of the seat?
Can I just bring my car to you and you do it for me 😂
😁 No, thanks! Not exactly a fun job! 😂
I'm replacing my seat cover on my 21013 ES300H. The video has been excellent. When I removed the old cover it has three plugs coming out of it. I believe some of them are the electric seat warmer. I live in Florida and don't need this option. I'm concerned it may also be related to the seat belt alarm. Can I just leave the connections under the seat open?
You could, but I would recommend keeping it as close to original state as possible. Seats have various sensors related to safety and air bags systems. You don’t want to leave those unplugged.
Was the process for your ES300h 2013 the same or similar to this video? I’m about to do my ES300h same year.
I do not trust my self to do this 😂 but this tutorial is absolutely fire tho
You can do this! 😁
Could you post a link to your trim remover tool kit
what about the back rest? looking to do a full swap on mine
Do they sell OEM cushion cover in beige colour?? Any idea what the part number?
There are beige ones either on Amazon or eBay... The link in the description sadly doesn't go to an actual eBay listing anyway, so it's Russian roulette on whether the one you order looks perfect like in this video or doesn't.
Do you have a tutorial on how to replace the upper portion of the seat?
No, mine was still fine on top. Sold that car already.
@@DIYtimeTRD would you know where I can find a tutorial? I am trying to replace the upper portion of the seat only
Excellent tutorial video, however, I'm, fairly sure the average person would not want to go through all this work. I know I sure would not.
Depends how badly you want this fixed, or how much money you are willing to pay someone else to do this....
Mine has cooled seats and all cold air was blowing through that reap in the middle.... 😂
Let me say I was pretty motivated to fix this....
Because u r not a DIY person. Bye
For God's sake. Take the whole seat out and put it on a table. That's too much work
@@darkvistar4213clearly you missed the part where he said the AVERAGE person.
Do you know if the 06-12 is250 have the same seat harness connections? I'm asking because i know the window regulators are diff.
Hi, would this be the same for a Lexus gs350 3rd gen?
*☀Thank you ✔for🌠sharing🗺Mr patient. Got my 2005 BMW 745. LI TO DO THIS SUNDAY🌌*
What size hog rings do these use? I want to order some prior to installation.
Thank you for the video !
My pleasure!
Appreciated sir, great vid
Excellent video however I am having a hard time visualizing how in the world you could access the passenger side of the seat to remove and reinstall while the seat is still in the car.
Kinda play with it and try different tools. Its doable. It was impossible to record it with the seat still in as you can imagine.
Thank you for sharing. Crap there are the hog rings.
Great video. My 2007 RX350 seat heater malfunctions. When the heater is turned on. It generates burning smell. Is the heater metal pipes below the cushion in your video at ~6:00?
No, heater is actually copper wires sown into the leather seat cushion.
The most hard part of replacement (closing metal rings) wasn't show at all
You need hog ring pliers to reattach the seat cover.
@@charliekilo3 I save tons of time:
Just used plastic ties for fixing instead of metal rings)
Ooof until those ties are broken by air temperature differences, those ties are worthless in my opinion
Can anyone kindly tell me if we can still order leather for the LS460 (2010) cars? The carwash guys ruined my backseats by scratching and leaving white scars and now I cannot even order leather seats for this model :-(
Is leather seat cover from RX350 2010-2012 years compatible with 2004-2009 ?
Don't know why but 2010 year cover costs twice cheaper..
Did you find a true leather replaceme ? if so where?
Your best bet is junk yards, then check on Facebook Marketplace if anyone parting out same car, then eBay, and as last resort fork out a bag of $$$ to the dealer.
Nobody is asking the most important question. Did he eat that fry or not???
😂It was delicious! 😋
That’s awesome, but now how do I put it all back together 😂
Solid thank you
good job
Txnks!
Man that’s lots of work 😂😂😂
Great video. Thanks, DIY-time. Where did you get those handy plastic tools to remove the plastic caps with ease? I will need to replace my front driver side bottom seat cushion. I will be watching your video several times....:) How much did you spend on the seat cover?
Thanks!
I posted a link in the description under this video for the tools and seat cover.
I was lucky and found my seat cover at the local junk hard for just $6! eBay is my second choice for used covers. Dealer wants something like $1000 a pop.
Hey there!! I hope you get this reply asp!! And respond quickly!, here is my problem: I have a 2019 Lexus ES350. Salesman said it was LEATHER when I found d out that it is NULUXE!!! I want to get LEATHER for the DRIVER side only. Here is the problem . The upholstery place said he could "replace only the INSERT ( seating and back rest area ONLY). I don't see how he could!!!! Looks like the ENTIRE SEAT WOULD BE ONE PIECE! The sides AND the middle part! Am I hmmm wrong? How could he replace ONLY that seating /back area?? Please hurry if you get this. Cause I was going to have him order the leather from a place in Cali. And have him do it. Thank you!!!!!!! The seats are VENTILATED. So he would have to get them PUNCHED.
Do you know if it would be possible to add the fan to upgrade a non ventilated seat? Seat is otherwise identical
It must be doable, cuz they can do it at the dealership on any car when people buy this as upgrade option, but it may require a bunch of stuff, like fan, wiring, control buttons, etc....
This video won't work for a 2008 Lexus ES 350 - the seat belt is attached to the seat and seat trim. There seems to be an extra screw somewhere to prevent the removal of the trim. Plus, you cannot remove the seat from the car easily, since the seat belt is attached to it. I didn't find any videos on the internet that show how to do the seat removal on an ES 350, so you're on your own.
I was looking for a video on how to do my seat cover on my es 350 2007… thank god I saw this comment now I’m def not doing this job
Would it be possible to swap the driver side with the passenger side? (Vehicle in video)
No, they are different.
If I replace the whole seat instead of the cushion will it work ?
I have a seat with the same year and model car
It should work, as long as it has the same features, like heating, cooling, etc...
What about the top?
Was the heating pad sewed into the leather or was it glued on the foam?
Sewed into the leather cover.
Can i install the LS 430 driver's seat on the IS 250 2008 ?
I doubt....
I lost an apple AirPods down the crack of my seat and it seems to have disappeared. I can hear it but can't find it. ANY TIPS? thanks I advance. Joe
Try using a magnet stick... !?
do you have a tutorial for the back part also?
No, mine was still in a decent shape.
Can’t believe a major car maker using Philip screws. Lol!
Whats wrong with that? 🤔
what a LOT of work. A used seat in good condition costs a few hundred dollars.
very good instructional video. but why you just not tear off damaged leather from sew joints and add new one and then sew it under? i do many diys too, but to reassemble seat to change cover is little bit unnecessary. if you change other seats, speak with pro sewer or watch em in work, it is possible to sew leather underneath with unvisiable joints. but who disliked this video are the guys who work in seat change service point xd.
I don’t think you can sow it right on the seat. Unless you are pro and have the right tools. Which I’m not 😁...
In my case the foam cushion was ripped and needed to be replaced too. And for that you absolutely have to take the seat apart.
Plus sowing pro will charge you quite a bit for their work. I spent like $15 total.
@@DIYtimeTRD sew.
I thought this would take me 8 mins like the video. Im on day two just finishing up
very nice thanks
👌🏻
Thank You.
👌🏼
Hi, can someone tell me if the replacement seat cushions are the same for both the drivers side and passenger side? Can you swap the drivers side and passenger side cushions over without any issues? Thanks
No, on my IS350 they are slightly different.
DIY-time Thanks
why you wand your passenger to sit on damaged leather...
I found a yellow pill with a cross on it under my seat. I'm gonna assume it's not medicinal and is probably ecstasy hahahahahaa.
😂😂😂
Hey was it hard finding the same colour combination for a reasonable price
I found a used cover for like $6 at the local junk yard, but newer Lexus’ can be hard to find there sometimes.
eBay is the next cheapest place.
Brand new OEM covers are ridiculously expensive.
DIY-time you have any key wording suggestions like what exactly l should search in google?
Use the eBay link in the description of this video, and just type your particular car model.
For junk yards, see if any of theses are near you: www.lkqpickyourpart.com/locations
DIY-time cheers but l live in Australia
Would you happen to know how to remove the headrest support guides on a 2010 Lexus rx350? Please help
Not sure.
@@DIYtimeTRD thank you for the reply
👌🏻
You can get a repair manual from Toyota if you dont mind spending $20. It should have that info. I got them here for my cars: techinfo.toyota.com/techInfoPortal/appmanager/t3/ti?_nfpb=true&_pageLabel=ti_home_page&contextType=external&username=string&password=secure_string&challenge_url=techinfo.toyota.com/techInfoPortal/login/techinfo&request_id=3204805765445699237&authn_try_count=0&locale=en_US&resource_url=https%3A%2F%2Ftechinfo.toyota.com%2F
what year is this IS350?
2007
Omg, you do have patience.
😂 You gotta have that or a lot of $$$
can someone tell me where to get the switches for the left electric buttons please?
Junk yard or eBay.
where can i get good design for 2010 lexus rx 350 leather car seat cover s
You can find a few interesting designs here:
rover.ebay.com/rover/1/711-53200-19255-0/1?ff3=4&pub=5575132837&toolid=10001&campid=5338538549&customid=&mpre=https%3A%2F%2Fwww.ebay.com%2Fsch%2Fi.html%3F_from%3DR40%26_trksid%3Dm570.l1313%26_nkw%3Dleather%2Bseat%2Bcovers%2Bfor%2B2010%2Blexus%2BRX%26_sacat%3D0
Looks complex but manageable.. found a seat cover for 150, upolstry wants to charge me 300 labor... lol no
Exactly!
Lehigh Acres?
Sarasota
all i could find is microfiber leather
Man, give me the prices cuz I'm not doing all of this. I followed for a minute, but nah. Great though.
👌🏼
thank you. I have to replace mine because a mouse ate my leather seat cover
Rats must like Lexus’s !
They made a huge nest under the hood in mine... 😬
I cannot find the link to obtain covers. Looking for the ES300H driver seat lower cover.
The link is for IS model. Just change it to ES300h in the search box at the top of the page.
Question regarding es300h (2013). How do I disconnect the airbag sensor from the battery?
Found a fake ID
$300 for just the bottom piece on my 2012 is350. What a joke! I would be better off having someone at a upholstery shop make them.😂
Fits perfectly rear-facing in our truck, which has a slightly smaller back seats. th-cam.com/users/postUgkx6_FKRYB2ClSPRyjcd8HptiCS3EiQoNX4 Feels as comfy and plush as our Graco Contender carseat
Thank you fur yer vid but that's why I don't drive sssshitty Japanese cars. "Next .. next .. next ..!" That's why I only drive Mercedes. There's not next next next. Btw, yer battery is dirty. Danke!
The full video would’ve been helpful. This is just not helpful at all
Like nothing at all at all? 🤨
Please complete video showing the actual installation of new cover and how supplement compressed seat padding. Can you add some padding to heated seats or is that a fire risk? Thanks