shout out from Aurora IL .... Madmikescustom here to say , thank you ,,,, i like to know what im doing before i work on most things inside a vehicle,........ thank you ,, was very detailed, video.... i think your video was very calming, so nice ,,,, thank you again and shout out to this man here for doing his thing,,,,,, hope people take notes..... 100% perfect detail.... got to get you a rick and mortry light for the back drop ... get more views that way..... ask people to comment as well my homie,,, all love.. mike
Your video was extremely helpful i was able to replace my door actuator no problem, only minor issue i will have fix placement of the window as its off by a few mm. Other then that great video!!!
I'm about to take apart my driver's side door. When the window went up and reached the top, there was a thud and then the sound of something plastic falling down inside. The window will no longer stay in the full up/closed position when closed. Vibrations allow the window to sightly lower; but doesn't fall all the way. It's like the open/lower, close/raise function is lost. I wonder if that's what that switch is you mentioned. Thanks for this video, since they stopped publishing Haynes/Chilton's manuals, creators like yourself is my only source of how-to before I start tearing stuff apart.
My passenger door window, seems to every now and then not sit properly next to the seal when the door is closed. At high speed i get a high whistle from the window from there being a gap between the door and the window? any ideas?
Love the video, thank you so much! I do have one question, I busted a mirror on my 2011 Genesis Coupe 2.0T, my stock Hyundai did not have turn signals on my door mirrors so I figured I’d upgrade them. How do I splice into the harness to install the new light door turn signals? Hopefully that makes sense
I did the same thing with the upgraded mirrors, I just haven't had time to wire it together yet. When I do figure it out, I will make a video about it. Thanks for watching
my outside door handle isn't working anymore, the handle itself is fine and not broken, but something in the linkage is, would have been nice to see you actually take apart the door locking mechanism. But otherwise good video
So how do i remove the window if the silver door panel still on? I unbolted all 10 nuts but it doesn’t want to yank off cause the window is still latched in from the inside ?
Armand Chaput i figured out that the window should be rolled up all the way to make the process easier. My window was rolled all the way down and disconnected from my vehicle so I couldn’t roll it up lol I managed but damn ..
@@edgarhids3610 mine just fell down and now it won’t go up. when i go to move it up i can hear the motor working and it’s sounds all crunchy, i’m thinking my window just fell off track
@@erikvillanueva5007 or could just be your motor. Replacing that can solve the issue. I need a new one for my passenger cause it rolls up slow af. Bad motor battery
Great job with this video! Very helpful! I promised a friend to look at her door and now I feel confident that I can fix it. Thank you!
Had to buy a completely gutted door to replace the one on my genny 😩 but this video saved me by a mile. Appreciate it bro 👌
Starts at 4:33
I really appreciate all the work you do and share with us on here. Life saver for total car noobs like myself that are scared to mess something up lol
That means a lot, thanks
shout out from Aurora IL .... Madmikescustom here to say , thank you ,,,, i like to know what im doing before i work on most things inside a vehicle,........ thank you ,, was very detailed, video.... i think your video was very calming, so nice ,,,, thank you again and shout out to this man here for doing his thing,,,,,, hope people take notes..... 100% perfect detail.... got to get you a rick and mortry light for the back drop ... get more views that way..... ask people to comment as well my homie,,, all love.. mike
Thank you and well said
Your video was extremely helpful i was able to replace my door actuator no problem, only minor issue i will have fix placement of the window as its off by a few mm. Other then that great video!!!
I'm about to take apart my driver's side door. When the window went up and reached the top, there was a thud and then the sound of something plastic falling down inside. The window will no longer stay in the full up/closed position when closed. Vibrations allow the window to sightly lower; but doesn't fall all the way. It's like the open/lower, close/raise function is lost. I wonder if that's what that switch is you mentioned.
Thanks for this video, since they stopped publishing Haynes/Chilton's manuals, creators like yourself is my only source of how-to before I start tearing stuff apart.
Thanks this helped me replace my ugly handles on the Inside lol
Most of the time yellow plugs in automotive is airbag related. So its probably an airbag crash sensor.
My passenger door window, seems to every now and then not sit properly next to the seal when the door is closed. At high speed i get a high whistle from the window from there being a gap between the door and the window? any ideas?
Love the video, thank you so much! I do have one question,
I busted a mirror on my 2011 Genesis Coupe 2.0T, my stock Hyundai did not have turn signals on my door mirrors so I figured I’d upgrade them. How do I splice into the harness to install the new light door turn signals? Hopefully that makes sense
I did the same thing with the upgraded mirrors, I just haven't had time to wire it together yet. When I do figure it out, I will make a video about it. Thanks for watching
Chief we don’t need a whole compare and contrast on the parts. Video is labeled how to remove the door panel. Otherwise decent video
hey im replacing my door lock actuator . does the panel that holds the window need to come off ? or just that first black inner part ?
shown in 8:06 can i remive the actuator from there ? or do i need to remove that silver part as well?
you just have to take the door panel itself off, watch the video. It shows it
I have the same question. For the actuator, is it behind the big silver piece. Or can you get to it before the silver piece has to be taken off?
Very helpful
My driver side door from the inside won’t open I pull the handle and it feels loose, do you know what the exact part that’s called??
Your cable might be stretched
my outside door handle isn't working anymore, the handle itself is fine and not broken, but something in the linkage is, would have been nice to see you actually take apart the door locking mechanism. But otherwise good video
So how do i remove the window if the silver door panel still on? I unbolted all 10 nuts but it doesn’t want to yank off cause the window is still latched in from the inside ?
There are bolts for the window behind the black gromet , they connect the window to the track
Armand Chaput i figured out that the window should be rolled up all the way to make the process easier. My window was rolled all the way down and disconnected from my vehicle so I couldn’t roll it up lol I managed but damn ..
@@edgarhids3610 mine just fell down and now it won’t go up. when i go to move it up i can hear the motor working and it’s sounds all crunchy, i’m thinking my window just fell off track
@@erikvillanueva5007 or could just be your motor. Replacing that can solve the issue. I need a new one for my passenger cause it rolls up slow af. Bad motor battery
@@edgarhids3610 how did you get it out with the window down?? Mine is the same
You have to program the door that's why it wasn't working
Hey man My window stuck all the way down and can’t reach those bolts in side . Is there any way to pull those out?
Take the power window motor off and then you can move the window up and down.
Paintless dent removal would of worked. But thanks! Now i know how to remove the door panel, which is why im here watching this 😬
You don’t know if PDR would’ve worked on that. You can’t tell from a video.
@@kevincaltzoncint9952 you dont know if i do pdr for a living
Same problem I have at the moment
What is the thing you pull out at 4:54-56 called?
Not sure what the official name of it is, it's a trim piece that hides a screw
My car window goes down automatically and the door locks and unlocks randomly and keeps doing it and when I open the door the window wount go down
Did you swap doors out
@@armandchaput no I have not it just started a while ago and everything bugs out what do you think it could be?