I have the SAMA IM01 version which is the same as the Tecware Fusion. The case says it supports a max CPU height of 155mm but in your video you are able to fit a 158mm and still close the case cover. I have a CoolerMaster Hyper 212X which is also 158mm. Now I must try to see if I can get it to fit in my case because I've been using the stock AMD 5600G cooler.
Confirmed: CoolerMaster Hyper 212X does fit with side panel on (it made contact with the side panel dust filter but was able to close without a bulge.) Case says max CPU cooler height is 155mm, but my Hyper 212X is 158mm and it fits.)
I crossed off CM NR200P when I saw this. Finally, a compact mATX case that fits my media machine build requirements. Athlon 3000G + B450M mobo here I come!
Built this (the Sama 01) with an i7 9700 and 1080ti, which is definitely pushing things up there thermally but managed to make it stable aircooled with everything staying in the mid 70's c under high load with 23c ambient. Once I can get my hands on a 3070/get a bulkier heatsink, I could definitely see being able to push the limit higher without turning the case fans into a jet engine. The only other thing I'd wish for is the option of the mesh front panel if you want to stick another intake there.
the CM NR200 and Techware Fusion almost has the same dimension but the nice advantage for those comes from m-ATX like me is that I don't need to buy a new mini-ITX board, and SFX I can just stay using my current peripherals as all of it can fit easily with this casing.
nice, im sold, finally case that almost same size as nr200 but support matx and atx psu, finally i can get rid of my q300l and get this, since im more into sff pc, thank for reviews
good case for compact PC build,i already using it for 4 months,its same model witih SAMA QUZAO IM. no issue in thermal and air flow its good to i think. NICE.
Yes enough, and after that it really depends on how you route things around. The tube could be towards the rear but then it'll be competing with the graphics card so it depends on your setup.
I can believe after a week of looking for cases that I could use for a NAS (even with some tweaking) i stumbled on this one online randomly. And its exactly the price I was willing to spend without feeling bad. I immediately went on youtube to get a better look at it since its matx. And i was this close to buying the therma core v21.
@@goldfries basically certain mobo the pcie (1st slot x16) placement depend on the model and brand itself. like b550m steel legend at 1st pcie while tuf b550m (if not mistaken) on 2nd slot pcie which below abit from steel legend. yuup HDD drive place bottom hard to get clearance unless place on the vertical slot for gpu (if not using beffy air cooler).
Not possible. Can refer to this video of mine where I have 2 fans at the bottom. The fans are even conflicting with MB pins already. th-cam.com/video/Lik2jdLh6cw/w-d-xo.html
Quick question here! Im using gigabyte b450m s2h matx motherboard where the gpu pcie slot uses 2nd and the 3rd slots, and for many matx cases, there's only 4 pcie case slots available, so there's only a little room for the gpu fans to breath. Is there any room available to install any 120mmx25mm fans on the bottom for my gpu with 39mm thickness? TIA.
hmm interesting, the original IM01 comes with dust filters on all sides according to reviewer from america. The Cube Gaming Axel version has only one for the top/bottom.
serious question. I wonder if there's somekind of bracket to mount floppy drive at the rear (where the rised gpu port is located) ? I'm desperate for a mini case with floppy drive bay
hiii just want to ask can i use a cpu cooler with 154 mm height with the glass panel im planning to use the id cooling se 234 argb with this case ...i check their site and they stated the ysonly support 150mm height with the glass panel ...but in ur video you stated even with 158 mm height it is still okay .
I use a cooler Gammaxx 400 EX which is 157.5mm in height will it fit in this case with no problem closing the side panels? I really like this case and want to try a sff case coming from Tecware Alpha M. It will definately fit since your noctua cooler is 158mm thanks
Can you fit a 150l × 170w × 86h mm PSU? I only have a 2 fan GPU so no worries over there. It's the width I'm worried about. It might hit the side panel since the width is quite large and won't fit overall. Thanks in advance if you'll answer!
Hey man, thank you for the review, very nice work you did! I just want to ask if the case can fit a noctua nh d15s or a nh u12a. I know the case says 155mm cpu cooler but seeing you install a u12s which 158mm left me wondering if I can fit an even bigger cooler!
nice review bro ! there only 2 reviews on this case that are in english thank you. I would like to ask if a 240mm aio would still fit inside the case even when I have a full size psu?
Just got my pc yesterday from viewnet. Was deadset on getting an itx mobo with nr200 case BUT, they only had ROG and aorus mobo only for intel. I want an intel 11th gen system to suit my needs. luckily they hv dis case in white. supposed to use an MSI B560 mobo with 4 ram slots and atx psu. It didn't fit. Had to change to an asus b560m prime k mobo with sfx psu, since i insisted on a fully modular psu. Maybe dats why the atx psu didn't fit too, it was fully modular. specs: 11400 ( with igpu) 16gb ram 3200 Corsair mp510 480gb + kingston A400 960gb asus tuf 1660 super 2 intake fans , 1 exhaust ( artic 120mm pwm, no rgb) zero rgb basically, cuz no tempered glass I am using it to edit videos for my channel, replacing my 8 years old alienware laptop
Thanks for the review. It looks like a very nice compact case for someone who needs portability but doesn't have the budget to buy an itx system (me). xD
Portability isn't that great on this one, check out my SGPC K40 review - that one's really portable. This one is still portable, in the sense it's way better than carrying a full sized rig but it's still rather heavy.
The website says it can only support cpu coolers up to 155mm? Just bought this case and I'm reluctant if the Arctic Freezer 34 Esports will fit in the case, it also is 157mm in height
@@nhbr4034 no time for all those. This one I have myself assembling stuff here and there but really no luxury for those types. Need to assemble fast and move on. I have B-roll like installing M.2 SSD but decided not to include.
Great review. Btw, am planning to setup With MATX asrock phantom gaming, with dual GPU and 1HDD. Do you think, it’s possible to do? What is the fan optimisation should I setup?
Haha I mean for my planning setup dual GPU, initially I wanted to put 1 3.5" HDD, will replace it with 2.5" SSD. But I still wonder if this case can support dual GPU on expansion slot 1 and 3/4
@@goldfries trying to find a good matx case that wont break my wallet my option is macube 110 and lian li 205m then i found your vid i like this sff case looks like itx , btw which cheap budget 3rd party cpu cooler will you recommend ?coz noctua u12s premium expensive cooler
Hi, is it possible to use 120 x 120 x 15cm fan on top of the psu for this config? Really appreciate ur reply since im currently deciding wther to buy sfx or atx psu
Initially I look at the holes and thought they're big, so I didn't bother to test as I felt that it was like open setup. However I was wrong, I have the numbers and the video is coming soon for an update.
muat bro aku bwk balik case ni dgn kotak dari newittechnology sri kembangan pergi bangi rilek je.. cuma kaki kena serong sikit laaa kat paddle motor.. tu skali kotak tau... haha kena kepit sikit aa guna tangan jgn bgi jatuh
@@goldfries Ah okey. I'm from Sweden. I planned on modding the cooler master case to fit a regulat sized mATX motherboard, but if I can get a hold on this model I rather go down that route. Thanks!
@@goldfries Thank you kind sir! That really did the trick! 😀 Too bad there's ni included fans. Right now the cooler master white version is on sale here for just 70 USD while the one you mentioned is a little more than that with no included fans or PCI-E riser and seem to have a little worse finish and quality in general. Either way I planned to spray paint it orange myself so that isn't a huge deal. I don't really understand why cooler master doesn't make their case so that you can fit regular sized mATX motherboards as well. Because it is possible without adjusting the frame size. The only thing you need to do is to move the power chord outlet/inlet in the back. I've seen a guy zip-tieing the full size mATX board in place. But I belive you could drill new holes and glue m4 nuts as standoffs. I haven't measured the hight of the built in standoffs but i believe them to be much lower than regular standoffs? Funny thing I designed a case of my own a couple of years ago with this exact design/layout. What I didn't knew was that the fiber board I used cosisted of a glue that is toxic and not meant for drilling and cutting. So I got allregic reactions and weird smell in my nose from using the computer. And since then I've been on the hunt for a case with this layout. Haha well... Thank you very much anyways! x)
God day sir thanks for the english review, one of my local computer store here already have stocked of this casing, and i am deciding to buy next week, my only question is if i can put 2 3.5 harddisk & 1 2.5 ssd at the same time?
Yes you can. The bottom panel can put 2x 3.5" HDD while the 2.5" SSD you can put at the front like what I did. Can refer to their product page www.tecware.co/fusion
hey buddy awesome review i am here for the algorithm! also I would like to migrate my Matx build into this case. You did mention that there might be clearance issues if you are using a modular ATX psu and a triple fan Graphics card (5700XT gigabyte) do you think an FSP Hydro GE gold 650 modular PSU and a gigabyte 5700 XT with 1x HDD fit in the case will buy (modular braided cables) please help. need your insight. hope you can make a video making use of a modular ATX PSU and a triple fan GPU just to show case the clearance. looking forward to more videos from you!
![ง้อ (ALRIGHT) - FOURTH Prod. by URBOYTJ [ OFFICIAL MV ]](http://i.ytimg.com/vi/Qs8ZeV6Dqj8/mqdefault.jpg)
Hi all, there is a follow up video for this casing at th-cam.com/video/eCZIKjXdvpw/w-d-xo.html
I have the SAMA IM01 version which is the same as the Tecware Fusion. The case says it supports a max CPU height of 155mm but in your video you are able to fit a 158mm and still close the case cover. I have a CoolerMaster Hyper 212X which is also 158mm. Now I must try to see if I can get it to fit in my case because I've been using the stock AMD 5600G cooler.
Confirmed: CoolerMaster Hyper 212X does fit with side panel on (it made contact with the side panel dust filter but was able to close without a bulge.) Case says max CPU cooler height is 155mm, but my Hyper 212X is 158mm and it fits.)
I crossed off CM NR200P when I saw this. Finally, a compact mATX case that fits my media machine build requirements. Athlon 3000G + B450M mobo here I come!
Haha like me lor, bye bye NR200 because my Micro ATX board come!
Built this (the Sama 01) with an i7 9700 and 1080ti, which is definitely pushing things up there thermally but managed to make it stable aircooled with everything staying in the mid 70's c under high load with 23c ambient. Once I can get my hands on a 3070/get a bulkier heatsink, I could definitely see being able to push the limit higher without turning the case fans into a jet engine. The only other thing I'd wish for is the option of the mesh front panel if you want to stick another intake there.
There is a clone of this case with mesh front called Fortron/FSP CST350.
the CM NR200 and Techware Fusion almost has the same dimension but the nice advantage for those comes from m-ATX like me is that I don't need to buy a new mini-ITX board, and SFX I can just stay using my current peripherals as all of it can fit easily with this casing.
nice, im sold, finally case that almost same size as nr200 but support matx and atx psu, finally i can get rid of my q300l and get this, since im more into sff pc, thank for reviews
The Inter-Tech IM-1 is also the same case
Same source.
great! this is cool until now after 3 years. do you still use this instead of NR200P? if budget is not an issue, which one do you recommend?
Just bought this last week and will arrive tomorrow, cant wait to build in this
Hope you enjoy as much I do!
It's good?
good case for compact PC build,i already using it for 4 months,its same model witih SAMA QUZAO IM.
no issue in thermal and air flow its good to i think. NICE.
Wow,ingat sfx psu,naiss
Ye guna ATX PSU, pastu SFX PSU saya boleh spare lebih.
Bila lagi abe cerah nk review tecware fusion ni 😂💪🏻 #menunggudenganharapan
@@emy695 baru keluar semalam haha
I've been using this case for one year now, the downside it doesnt have dust filters
Will the Noctua NH-D15 fit in this case?
Great review with atention to every details!
Is there enough space to mount AIO radiator with the ATX PSU?
Yes enough, and after that it really depends on how you route things around. The tube could be towards the rear but then it'll be competing with the graphics card so it depends on your setup.
i have the exact same motherboard and using the case also and i have no issues with the support
The final hole is without support, that's all. That area is open.
Thanks for this!
Very helpful!
I have a B450 atx and planning to upgrade to b550 itx in the future 👍 getting this case
top front can actually mount a fan with atx power supply, but requires a slim profile one
OK, but quite pointless right? After all PSU already has fan there. Air still go into PSU more.
I can believe after a week of looking for cases that I could use for a NAS (even with some tweaking) i stumbled on this one online randomly. And its exactly the price I was willing to spend without feeling bad. I immediately went on youtube to get a better look at it since its matx. And i was this close to buying the therma core v21.
i got an tuf a520m plus mobo. 1660 super ventuss oc, deepcool gammaxx and an atx pssu.. will it fit in this case?
to put 1st pcie with long card need use atx psu less 140mm (superflower gold leadex v), if used pcie 2nd slot gpu can support 330mm with 160mm atx psu
Just have to mind the PCI-E speed, also the thickness of the graphics card. Also with that, no room for additional fans or drives at the bottom.
@@goldfries basically certain mobo the pcie (1st slot x16) placement depend on the model and brand itself. like b550m steel legend at 1st pcie while tuf b550m (if not mistaken) on 2nd slot pcie which below abit from steel legend. yuup HDD drive place bottom hard to get clearance unless place on the vertical slot for gpu (if not using beffy air cooler).
Im just here to find out if the Hyper 212 RGB Black fits
How to install a hardrive?
Will a dual air cooler clear the ram, or bump into it?
Will the case fit a B450m mortar max, palit 3070(304 mm), scythe mugen 5(154.5 mm) and atx psu?
Aiyo, I should have paid more attention to this review
Never knew you could mount 2.5m HDD/SSD on the front
Now my PC a 3.5 HDD Mounted on it's side
is it possible to use a 240mm aio when using an sfx psu?
Can you put hdd at the bottom with 2 fans the same time?
Not possible. Can refer to this video of mine where I have 2 fans at the bottom. The fans are even conflicting with MB pins already.
th-cam.com/video/Lik2jdLh6cw/w-d-xo.html
Quick question here!
Im using gigabyte b450m s2h matx motherboard where the gpu pcie slot uses 2nd and the 3rd slots, and for many matx cases, there's only 4 pcie case slots available, so there's only a little room for the gpu fans to breath. Is there any room available to install any 120mmx25mm fans on the bottom for my gpu with 39mm thickness? TIA.
Sorry missed this Q, consider slim fans.
I got 155mm cooler, can it close the tempered glass??
Do you think this case need to add additional filter (magnetic DIY filter) to prevent dust buildup inside the case?
Im buying h510m hdv
Nr200p will suffice or not bos?
I always wanted to shrink my PC case and my face lit up even more when you said it can fit mAtx board in it. If only I can get the newer GPU nowadays.
While I love ITX boards, Micro ATX gives a lot more headroom for expansion.
Is your build seriously lack of airflow? I don't see fan at the bottom. CPU cooler fighting air with the PSU.
Can a 3 fan gpu fit into this case? A gpu like Rog Strix 2080 super?
hmm interesting, the original IM01 comes with dust filters on all sides according to reviewer from america.
The Cube Gaming Axel version has only one for the top/bottom.
fits a Sytche Big Shurikken 5? its only 5mm more high than 'ofcial' suported cooler of this case..
can thermaltake tough gf1 psu fit?
ATX and SFX PSU fits, just depends on your intended setup.
If i use non modular psu. Does it fit 1 ssd and 1 3.5 hdd? With 2fan gpu
serious question. I wonder if there's somekind of bracket to mount floppy drive at the rear (where the rised gpu port is located) ? I'm desperate for a mini case with floppy drive bay
But how would you be accessing the drive? I haven't seen any case with 3.5" cut out for ages.
Can it fit a 240mm aio?
is it the same as cube gaming axel?
Where can I get one of these in the USA? I've scoured the internet and its hard to find any
Hello! Is there any way to tell me the height of the case without the feet attached? Thank you!!
does this side panel doesnt come in contact with a noctua nhu12s?!
Hi goldfries, what exactly this color model? is this black or silver? nice content btw!
what ryzen 5 did u use sir for b550m steel legend
can you fit hyper 212 black edition in there?
I think can, without TG.
Hyper 212 LED Can
@@Kayuan thank you so much!!
hi, could I fit a second fan on the rear of that noctua cooler? even if it's a slim one?
What cpu cooler your using?
hiii just want to ask can i use a cpu cooler with 154 mm height with the glass panel im planning to use the id cooling se 234 argb with this case ...i check their site and they stated the ysonly support 150mm height with the glass panel ...but in ur video you stated even with 158 mm height it is still okay .
I have 850w ATX PSU from evga, a gpu with this dimension (290 x 140 x 51 mm) and b550m matx will everything fit ? thank you.
Will CPU COOLER id cooling 224 xt with 154 mm fit with tempered glass?
I use a cooler Gammaxx 400 EX which is 157.5mm in height will it fit in this case with no problem closing the side panels? I really like this case and want to try a sff case coming from Tecware Alpha M.
It will definately fit since your noctua cooler is 158mm thanks
if use atx psu, can it fit aio?
120mm AIO on side rails can. 240mm side rails not possible, at the bottom I think possible but could be VERY cramped.
Can you fit a 150l × 170w × 86h mm PSU? I only have a 2 fan GPU so no worries over there. It's the width I'm worried about. It might hit the side panel since the width is quite large and won't fit overall. Thanks in advance if you'll answer!
Hey, great review.
Out of curiosity, what kind of temps were u getting at load?
Check out the follow up video! th-cam.com/video/eCZIKjXdvpw/w-d-xo.html :D
Hi I would like to know if a 336 GPU would fit in this case? The GPU I got is huge!
sir what tower cooler are you using?
how many liters is this case?
You can only put 1 harddisk?
can i install 280mm radiator in this case?
I would love this case... dont seem to sell it in the UK though :(
Its sold in different names..
Tecware Fusion
Intertech IM-1 POCKET
KRUX Naos Tg
able to mount fans at the bottom of the case also?
Yes, able to do so.
does this case support inverted orientation without modding?
Can i use a Fuma 2 with Tg panel ou i 120mm aio on top?
I see it can fit a galax 3080ti sg
Boleh guna untuk gaming? Akan panas tak nanti?
Hi.. Can fit 2x 120mm fans at the bottom if got 1x 3.5mm hdd at the bottom?
No you only have limited space. You can see from.
Either 2x fans or 1x fan and a drive.
@@goldfries I see.. btw can you mount 3.5inch hard drive at the front? so i can mount 2x fan at the bottom
Love the vid, thermal performance?
No thermal performance because it's like an open case, the holes are big .... HOWEVER! I will have a follow-up content later this week.
@@goldfries alright, looking forward for the follow up
Hey man, thank you for the review, very nice work you did! I just want to ask if the case can fit a noctua nh d15s or a nh u12a. I know the case says 155mm cpu cooler but seeing you install a u12s which 158mm left me wondering if I can fit an even bigger cooler!
How about the airflow though?
Check out the follow-up video.
th-cam.com/video/eCZIKjXdvpw/w-d-xo.html
nice review bro ! there only 2 reviews on this case that are in english thank you. I would like to ask if a 240mm aio would still fit inside the case even when I have a full size psu?
Possible, with some 'depends' (conditions)
@@goldfries okay bro thanks!
Just got my pc yesterday from viewnet.
Was deadset on getting an itx mobo with nr200 case BUT, they only had ROG and aorus mobo only for intel.
I want an intel 11th gen system to suit my needs.
luckily they hv dis case in white.
supposed to use an MSI B560 mobo with 4 ram slots and atx psu.
It didn't fit.
Had to change to an asus b560m prime k mobo with sfx psu, since i insisted on a fully modular psu. Maybe dats why the atx psu didn't fit too, it was fully modular.
specs:
11400 ( with igpu)
16gb ram 3200
Corsair mp510 480gb + kingston A400 960gb
asus tuf 1660 super
2 intake fans , 1 exhaust ( artic 120mm pwm, no rgb)
zero rgb basically, cuz no tempered glass
I am using it to edit videos for my channel, replacing my 8 years old alienware laptop
GOOD REVIEW. CONCISE AND STRAIGHTFORWARD 👌
Thank you. :D
Thanks for the review. It looks like a very nice compact case for someone who needs portability but doesn't have the budget to buy an itx system (me). xD
Portability isn't that great on this one, check out my SGPC K40 review - that one's really portable.
This one is still portable, in the sense it's way better than carrying a full sized rig but it's still rather heavy.
@@goldfries Will do, thanks for the heads up! 😁👍
bro how's the airflow so far?
A month on now and so far so good, will have a follow up video.
What's your fan size? I want to use my current 140mm if possible
Quick question, can you still use the side bracket with fan, with that 157mm air cooler?
I'm afraid not. Have to go with shorter air cooler for that.
The website says it can only support cpu coolers up to 155mm? Just bought this case and I'm reluctant if the Arctic Freezer 34 Esports will fit in the case, it also is 157mm in height
hi sir which one is smaller NZXT N210 or the fusion? planning to swap fron nzxt n210
Fusion is way smaller. NZXT H210 is more like a shortened tower casing that's all.
Volume wise the H210 is 27L, the Tecware Fusion is less.
@@goldfries thanks
Bro, between this and inwin 301 which is better?
You should also do a build video on this boss
This one not consider build yet ah?
Actually I focus on the various aspects of the casing rather than putting parts in one by one.
@@goldfries ah, I mean a video like a pov building
@@nhbr4034 no time for all those. This one I have myself assembling stuff here and there but really no luxury for those types.
Need to assemble fast and move on. I have B-roll like installing M.2 SSD but decided not to include.
you should see the other guy
Great review. Btw, am planning to setup With MATX asrock phantom gaming, with dual GPU and 1HDD. Do you think, it’s possible to do? What is the fan optimisation should I setup?
With the same casing?
Yes am considering this casing. Can drop HDD tough, won't be using any HDD anymore. Just 2.5" size
@@hskyblue I've dropped the HDD myself, now running 2x M.2 drives.
Haha I mean for my planning setup dual GPU, initially I wanted to put 1 3.5" HDD, will replace it with 2.5" SSD.
But I still wonder if this case can support dual GPU on expansion slot 1 and 3/4
This or Quad V2 for airflow?
Not sure about Quad, this one's good for sure.
only 1 hdd can fit ?
From what I know, 2 at least. Check out the Tecware Fusion site.
@@goldfries trying to find a good matx case that wont break my wallet my option is macube 110 and lian li 205m then i found your vid i like this sff case looks like itx , btw which cheap budget 3rd party cpu cooler will you recommend ?coz noctua u12s premium expensive cooler
Got the same psu, great product
Hi, 158mm cpu cooler fits?
Bought it on shopee, now to wait for 1 month haha, I've used sea shipping to sarawak.
How come have to wait 1 month?
@@goldfries sea shipping boss haha, use ship not plane, I'm on a budget so need to save every last penny possible
@@goldfries sea shipping I guess. But There are normal shipping for the tecware fusion, I have to wait a week for it arrive at sabah
@@nhbr4034 didn't know can choose shipping type.
anyone tried an aio cooler on this case
Can it fit radiators?
Hi, is it possible to use 120 x 120 x 15cm fan on top of the psu for this config? Really appreciate ur reply since im currently deciding wther to buy sfx or atx psu
Yes
You can see it here at 05:19
th-cam.com/video/2P7GCgkaYno/w-d-xo.html
Nak tanya, Kalau pakai tuf b550m plus wifi masok tak case?
Semua Micro-ATX boleh masuk.
@@goldfries wahhh okey bg thank you
How about your temps? Max and idle?
Initially I look at the holes and thought they're big, so I didn't bother to test as I felt that it was like open setup.
However I was wrong, I have the numbers and the video is coming soon for an update.
@@goldfries thanks I'm planning to buy but hesitant since my board is matx and can't fit many fans on this case.
Did it reach 70° plus?
I can't fit my hdd it hits the usb port is that okay to bend a little?
Boss, case ni muat tak kalau nak letak dalam/atas bakul moto?
Bakul moto berapa besar? Rasa tak muat ni.
muat bro aku bwk balik case ni dgn kotak dari newittechnology sri kembangan pergi bangi rilek je.. cuma kaki kena serong sikit laaa kat paddle motor.. tu skali kotak tau... haha kena kepit sikit aa guna tangan jgn bgi jatuh
B460M TUF gaming
Atx psu
1x hdd 2.5
1x hdd 3.5
Does it possible to fit in that case?
possibly yes
Great video
can use normal size psu and matx mobo is a win win for me.
Can't find where to buy it.
It has other names around the globe. Where ya from?
@@goldfries Ah okey. I'm from Sweden. I planned on modding the cooler master case to fit a regulat sized mATX motherboard, but if I can get a hold on this model I rather go down that route. Thanks!
@@ChrisKadaver Try "Sama im01", you might get some hits. :D
@@goldfries Thank you kind sir! That really did the trick! 😀
Too bad there's ni included fans. Right now the cooler master white version is on sale here for just 70 USD while the one you mentioned is a little more than that with no included fans or PCI-E riser and seem to have a little worse finish and quality in general. Either way I planned to spray paint it orange myself so that isn't a huge deal.
I don't really understand why cooler master doesn't make their case so that you can fit regular sized mATX motherboards as well. Because it is possible without adjusting the frame size. The only thing you need to do is to move the power chord outlet/inlet in the back. I've seen a guy zip-tieing the full size mATX board in place. But I belive you could drill new holes and glue m4 nuts as standoffs. I haven't measured the hight of the built in standoffs but i believe them to be much lower than regular standoffs?
Funny thing I designed a case of my own a couple of years ago with this exact design/layout. What I didn't knew was that the fiber board I used cosisted of a glue that is toxic and not meant for drilling and cutting. So I got allregic reactions and weird smell in my nose from using the computer. And since then I've been on the hunt for a case with this layout. Haha well... Thank you very much anyways! x)
God day sir thanks for the english review, one of my local computer store here already have stocked of this casing, and i am deciding to buy next week, my only question is if i can put 2 3.5 harddisk & 1 2.5 ssd at the same time?
Yes you can. The bottom panel can put 2x 3.5" HDD while the 2.5" SSD you can put at the front like what I did.
Can refer to their product page www.tecware.co/fusion
@@goldfries thanks for your input sir, more power to you & your channel.
Hi, did you just fit a full size ATX motherboard?
mATX is the max this case can fit
hey buddy awesome review i am here for the algorithm! also I would like to migrate my Matx build into this case. You did mention that there might be clearance issues if you are using a modular ATX psu and a triple fan Graphics card (5700XT gigabyte) do you think an FSP Hydro GE gold 650 modular PSU and a gigabyte 5700 XT with 1x HDD fit in the case will buy (modular braided cables) please help. need your insight. hope you can make a video making use of a modular ATX PSU and a triple fan GPU just to show case the clearance. looking forward to more videos from you!