How to Replace Front Sway Bar Link 94-02 Dodge Ram 1500

Buy Now!
New Sway Bar Link from 1AAuto.com 1aau.to/ia/1ASFK01436
In this video, 1A Auto shows you how to remove, replace, and install a sway bar end link. This video is applicable to the 94, 95, 96, 97, 98, 99, 00, 01, 02, Dodge Ram.
🔧 List of tools used:
• 16mm Socket 1aau.to/oML/1AXAA00015
• 17mm Socket 1aau.to/oML/1AXAA00015
• 18mm Socket 1aau.to/omq/1AXAA00043
• Pliers
• Side Cutters
• Ratchet 1aau.to/oXT/1AXAA00016
• Hammer 1aau.to/ohB/1AXAA00091
For More Info visit us at 1aau.to/h/bSD/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@1AAuto]

√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto
√ *Do it Yourself*
√ *Save Money*

[@jamboreejoseph766]

Bought my parts and installed! Recommending you guys to everyone! Cheers! 🏆

[@mattblattel8106]

Glad they found a car that was held together by rust. Not only does it make it a practical scenario to illustrate the issues that a novice would otherwise be clueless on how to proceed when they run into a stuck part and their vehicle is half disassembled, but it also makes me feel better about my rust-bucket

[@danietkissenle]

Nothing to be ashamed of driving around a rust bucket held together by duct tape and bailing wire

[@waynebowling8139]

Thanks so much for your help. I'm just learning how to do a lot of DIY stuff on my 2001 Ram Sport 4x4. Your channel helps me out when I've got simple question on how to do the small things. I love working on my truck, and 1AAuto makes it so easy.

[@allmycarsisbroke]

Lenny, how do you guys always find the CRUSTIEST 2nd Gens on Earth for these demos? 😂
Anyway, great video. Thanks for making all these. Immensely helpful.

[@dewars81]

is there a link for all the 96 dodge vidoes? It's my current vehicle and these videos have been super helpful, thank you

[@mikeg2455]

There is. If you haven’t already found it, just tap on the 1A name in the video title screen. Then tap playlist and scroll down to the 2nd gen playlist. There are 86 videos there for the 2nd gen truck.

[@mkironman55]

Why would anyone give this video a thumbs down? Just what more could be added?

[@Rowen170]

I have a 96 Dodge ram 1500. One of the swaybar links is completely done, no bushings, The other one is getting close. Will bad sway bar links cause a little bit of vibration and wobbling in the front end while going down the road?

[@daethanhudson1071]

Good video but I need help I have an 01 ram 1500 and my links are straight bars the go from sway bar to the lower control arm I need help 😢

[@sunnybeach4837]

Great video!

[@dennissecor8092]

Great video thank you for sharing!

[@adamc2300]

Can you do this lifting one side at a time? Or does the whole front end need jacked up? Ive always lifted both wheels off when doing anything with the sway bar.....just curious

[@natureandrandomstuff]

Like always great videos. 👍

[@byrceblackshear4249]

This is very helpful THANKS 👍🏽

[@1AAuto]

+Byrce Blackshear Thanks for checking us out! 1AAuto.com

[@FCR701]

It be great if u guys make a core frame mount for the dash. No one makes those

[@Stewpadaso4661]

Love the verichle Lenny

[@danktrolls8186]

the one i ordered from 1aauto for a 2000 ram 2500 doesnt look anything like that

[@somedude1129]

My kit didnt come with a castle nut. Should I reuse the original or just use what came in the kit?

[@1AAuto]

+Juney Shober Thanks for watching! These parts will not always come with a castle nut as there are several styles of locking nuts. What ever came with the new part should be just fine to use!

[@mfamus2272]

I have a death wobble issue. Will this solve it?

[@1AAuto]

+Earl Daniel We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c

[@jeffchildrey5773]

What happens if it breaks?

[@kushkiller7108]

Good video but you didnt mention anything about torque specs

[@jansonvance464]

I wish my truck was that easy to work with

[@sive1231]

Mine is literally inside the braket...

[@DezzyyRayy]

6:03 BOOP :)

[@michaeldepow6663]

Put never seize on it

[@1AAuto]

+michael depow Thanks for the feedback!

[@keganwatson1349]

Good God! Did they park that poor truck in the ocean?