How to Replace Inner Tie Rod 2002-2008 Dodge Ram 1500

Buy Now!
New Tie Rod Set from 1AAuto.com 1aau.to/ia/1ASF...
New Tie Rod from 1AAuto.com 1aau.to/ia/1AST...
This video shows you how to replace the inner tie rods on your 2002-2008 Dodge Ram 1500. The inner tie rod has a ball joint that can wear over time, causing a clunking noise, loose steering, and eventually, other problems with the wheel and suspension components. It’s a good idea to replace your inner tie rods as soon as you notice any of these symptoms.
This repair was done on a 2004 Dodge Ram 1500 Laramie 5.7L Crew Cab Pickup 4-Door 4WD Automatic and the process should be similar on the following vehicles:
2002 Dodge Ram 1500
2003 Dodge Ram 1500
2004 Dodge Ram 1500
2005 Dodge Ram 1500
2006 Dodge Ram 1500
2007 Dodge Ram 1500
2008 Dodge Ram 1500
Tools you will need:
• Flat Blade Screwdriver 1aau.to/obei/1A...
• Pry Bar 1aau.to/oP9/1AX...
• 21mm Socket
• Locking Pliers 1aau.to/oj2/1AX...
• Pliers
• Ratchet 1aau.to/obtP/1A...
• Socket Driver
• Socket Extensions 1aau.to/objS/1A...
• Gloves 1aau.to/oRT/1AX...
• Marker / Writing Utensil
• Safety Glasses
• Floor Jack 1aau.to/oXR/1AX...
• Hammer
• Jack Stands 1aau.to/oP9/1AX...
• Wheel Chocks
Subscribe: / @trq
Check out our playlist:
Dodge Ram 1500 3rd Generation 2002-2008: • Dodge Ram 1500 3rd Gen...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money

[@timmygilbert1371]

Are there any torq specs on the inner tie rod nut ?

[@reelhoss3715]

What are those pliers used on inner tie rod nut?

[@irenemorin7653]

I have a 2002 dodge ram 1500 is the inner tie rod suppose to rotating after u loosen the jam nut or not rotate while Jam nut is tight?

[@travisj2695]

You also could have measured the distance from the nut or marked it and lined up the new tie rod and marked the same spot

[@travisj2695]

BTW you could have used the cutter to remove the other band

[@travistodd6604]

I was able to reuse the band on mine if you dont Destroy it you cant re use it and your a pro

[@michaelmendillo7513]

Your a great teacher Sir ! TY ! 😁 👍✝️💕

[@colsonlestatduvall690]

What about if the reason I’m replacing it is it became unthreaded.

[@mastercylinder5225]

Thank you!!!!!!

[@drumbumrockyable]

Nice