Got to install this and the charge piping today. I know exactly what you’re talking about. Can def feel the gains. Very easy install like you said. Great video as usual bro
Thanks for all the videos. I am trying to get caught up to you, just installed 6mt upper torque mount, PRL front pipe, Ultra Racing strut bar and dipped my window chrome. Strut bar and torque mount make the car feel more grounded and precise in the corners. Also running 255/30/19 Michelin PS AS4 tires which helps. Running Hondata 93 tune, catless down pipe, pulled a car length on a stock CTR the other day, 30-80 pull, before the latest mods , made him want a tune! Keep the videos coming.
Interested in seeing how knock control is like. I know for me over extended pulls knock control and iat goes high. Been thinking about getting one recently too, might consider the mishimoto one since the black isn’t extra
another great video. another thing to do is spray water with alittle soap to make sure you have no air leaks before putting on the bumper. on hot days your car is gonna thank you
Wish I could have seen what the inside of the bumper looked like. I backed over a curve that ripped one side of the bumper off. I need new clips but not sure which ones, and not sure if there's clips attached to the bumper.
Great video as usual. My son just put the Mishimoto in his last week. He said he couldn't find any good videos to help him through the install. Well now there is one thanks to you. I will be following your video when I do mine. Keep it up brother!
Thanks for the video Dan! Amazing work!!! it's pleasure to watch your videos! It would be interesting to see what the difference in intake air temperature is. Drive with another Honda nearby and take the temperature from the sensors))
Great video and review. I have a 21 accord 2.0 and decided to go with the Mishimoto Intercooler with PRL charge kit. I believe my results are similar to yours.
I can’t wait to see what else you do with this car... I’ve been trying to figure out how to get an LSD in the automatic but I really think it’s impossible to be honest
@Jay G the Type-S is awd so I would assume more stress on the transmission as well and being a much heavier car by like 1k lbs so I would say it needs thr extra cooling. I bet you the transmission is very similar between the 2
Hey Dan when you connected back the collision system did you have any warning messages after. My messages is still on and I'm hearing I have to take it to honda to get recalibrate.
@@DanVilla7 thanks. I will have my fil helping me. Thanks for all your content brother. Your videos are always top notch and in depth. I like how you keep yours stock looking which is exactly what I want too. Gotta have the family car.
@@DanVilla7 great thanks man been watching all the vids keep up the good work love the accord mines the lunar silver almost fbo got the downpipe just dont want to snap the lock nut
Hey Dan how’s that intercooler holding up, also I live in the south basically 80+ till October lol, will this really help with heat soak? Also what tools are needed for this?
nice vid, it doesnt look too hard. i wasnt even considering doing any mod like this but i may just do it. did you spill coolant/have to refill a little? does coolant go through the intercooler? not too sure how that works lol
@@DanVilla7 I don’t know if I want to go stock height or get bags I only want bags because of how dope it is that you can just change the height with the click of a button
@@DanVilla7do you mind elaborating that might make me change my mind. I’ve also thought about coil overs but those need to be readjusted to often so I’m not trynna deal with that.
@@DanVilla7 Oops I did see the whole install though :) thanks for the vid. I have prl charge pipes I will be installing with the intercooler together. Long day
Got to install this and the charge piping today. I know exactly what you’re talking about. Can def feel the gains. Very easy install like you said. Great video as usual bro
I like the way you make videos bro! Good pacing, explanation, visuals, all that
Thank you appreciate it!
Thanks for all the videos. I am trying to get caught up to you, just installed 6mt upper torque mount, PRL front pipe, Ultra Racing strut bar and dipped my window chrome. Strut bar and torque
mount make the car feel more grounded and precise in the corners. Also running 255/30/19 Michelin PS AS4 tires which helps. Running Hondata 93 tune, catless down pipe, pulled a car length on a stock CTR the other day, 30-80 pull, before the latest mods , made him want a tune! Keep the videos coming.
You're welcome!
Thanks for the video Dan, Waiting to see the next video with your thoughts and temp difference.
This is very helpful. Appreciate it
Dan Villa is at a whole new level, “el duro in is stuff” great 👍 work in each and one of your videos Sir! Gracias 🙏
Thank you appreciate it!
finally i was waiting so long for this!! Don’t ever sell your car bro I need them installation tips 😂
Haha 😄
Fr tho 😂🙏🏻
Thanks my man great video
Thank you for all you do man appreciate ya
🤘
Very nice video, waiting for the test intercooler
Coming soon!
Interested in seeing how knock control is like. I know for me over extended pulls knock control and iat goes high. Been thinking about getting one recently too, might consider the mishimoto one since the black isn’t extra
another great video. another thing to do is spray water with alittle soap to make sure you have no air leaks before putting on the bumper. on hot days your car is gonna thank you
Thanks appreciate it! I usually use that trick to check for exhaust leaks.
Nice how to… also liked the McLovin “it’s in“ 🤣
Thanks! Glad you caught that part 😁
Awesome video thank you
Wish I could have seen what the inside of the bumper looked like. I backed over a curve that ripped one side of the bumper off. I need new clips but not sure which ones, and not sure if there's clips attached to the bumper.
Great video as usual. My son just put the Mishimoto in his last week. He said he couldn't find any good videos to help him through the install. Well now there is one thanks to you. I will be following your video when I do mine. Keep it up brother!
Thank you appreciate it
So if I get the phearable tune is there a stage 1,2,3, etc like ktuner? And a also what’s the difference between front pipe and down pipe
What all tools are needed for intercooler install?
Great installation
Thanks!
Thanks for the video Dan! Amazing work!!! it's pleasure to watch your videos! It would be interesting to see what the difference in intake air temperature is. Drive with another Honda nearby and take the temperature from the sensors))
Thanks really appreciate that! I hava a review video coming out soon
Great video and review. I have a 21 accord 2.0 and decided to go with the Mishimoto Intercooler with PRL charge kit. I believe my results are similar to yours.
Thanks. They make great products as well
I can’t wait to see what else you do with this car... I’ve been trying to figure out how to get an LSD in the automatic but I really think it’s impossible to be honest
Yeah that's something this car would really benefit from.
@@DanVilla7 totally agree
@Jay G the Type-S is awd so I would assume more stress on the transmission as well and being a much heavier car by like 1k lbs so I would say it needs thr extra cooling. I bet you the transmission is very similar between the 2
Dang imagin LSD on this car it would be hella fast
Ok now you def gotta come to jersey and go to island dragway. Maybe we can have an accord meet there one sunday. Great local track
Lol, maybe one day. It's 100 miles from me good size trip
@Dan Villa i travel 215 miles a day round trip. Poor car is 11 months old with 54000 on it already!!!!!! U must be affraid of a stock accord :p
@Jeremy Younkers lol come to me we can do some highway pulls. But that's some serious mileage damn
@@DanVilla7 yeah fml!!! My 18' si had 130k when i got rid of it
And im down just take it easy on me. The highway is the dangerzone for accord predators!!!
I'm interested to see if there are any power gains.
im more interested how much better the heat soaking issue is
@@albieYT im interested
intercooler doesnt provide power gains it maintains the power and you dont get heat soak
Donde puedo comprar la parte esa mi carro lo tiene quebrado y no desarrolla la velocidad no se si será x eso pero quiero empesar cambiando esa parte
Hey brother for the sensor bracket re installing you mention using a screwdriver with socket is best what size socket was it?
Hey, I mentioned in the video for sure. It's been a while so I don't remember off hand. If I had to guess I would say probably 10mm
Hey Dan, I just a 2.0 as well. Love how your car sits. Can you tell me what exact set up you got. Thanks
Thanks! It's on H&R Sport Springs 1.2 " drop front and rear with H&R 20mm spacers
It’s in!
Will it benefit having intercooler without having a tune?
What is better mitshimoto or prl
Hey Dan when you connected back the collision system did you have any warning messages after. My messages is still on and I'm hearing I have to take it to honda to get recalibrate.
I don't believe I unplugged mine. So I didn't get any waring lights. You can refer back to the video to confirm.
@11:31 absolutely killed lol
Hahah forgot I put that in there 🤣
Hey any recommendations for Reinstallation of the bumper? I got mine coming in this week and will be installing immediately.
Yes have an extra set of set of hands will make it much easier
@@DanVilla7 thanks. I will have my fil helping me. Thanks for all your content brother. Your videos are always top notch and in depth. I like how you keep yours stock looking which is exactly what I want too. Gotta have the family car.
Can I do this without a tune
Did you have the reset the Honda sensing after the install and so did you have to go to a dealership or can you do it manually yourself?
I did not, everything works perfectly.
What’s the name of that pry tool you used to get the plastic clips off? I need one
Trim removal tool kit:
amzn.to/3uix3U1
Would disconnecting the negative terminal mess with the k tuner if plugged in ?????
Nope not all all
@@DanVilla7 great thanks man been watching all the vids keep up the good work love the accord mines the lunar silver almost fbo got the downpipe just dont want to snap the lock nut
Hey I’m getting a p0172 rich system bank one any suggestions after installing ?
I'm not sure to be honest
@@DanVilla7 as of today I think I figured it out after the v2 intake the vacuum hose on the inlet was hitting against the hood
@almightyskynet i guess it was just coincidental
Is this the same process fir the 1.5ts? Recently just bought a mishimoto intercooler
Yep the intercooler is the same
@@DanVilla7 hell yea thank u brotha bouta use this guide for when i instal mine
Gotta do a follow up vid on how it feels. Also what lip is that !? Shits clean af
That video is coming soon. Thanks appreciate it link for it below
Front Splitter:
amzn.to/3A1uya6
Do you have a tune with that intercooler or no ?
Had ktuner phearable stage3
That passenger side Honda sensing 10mm bolt kicked my ass lol
Yeah they are a bit tricky to get back in. Lol
Hey Dan how’s that intercooler holding up, also I live in the south basically 80+ till October lol, will this really help with heat soak? Also what tools are needed for this?
Itwill definitely help with heat soak. All the tools I use are in the video
I just realized what did you end up doing with DC sports exhaust?
I sold it 3 days after installing it. Wasn't for me
@@DanVilla7 i see, gonna get it for my car soon since im still a child and like that loudness lol
@@albieYT 🤣
nice vid, it doesnt look too hard. i wasnt even considering doing any mod like this but i may just do it. did you spill coolant/have to refill a little? does coolant go through the intercooler? not too sure how that works lol
Only air goes through the intercooler. So thats one less thing you have to worry about.
Why did you go with PRL and not Mishimoto?
One main reason is thay I didn't want that ungly M stamped on it. I wasn't sure if it was optional like on the prl where they give you a stencil.
What is the name of the front lip you have?
Its the v1 look in the description of my videos theres a li k for it
Hey Dan are you ever going to get air suspension? Or just stay on your lowered springs
I don't think I would
@@DanVilla7 I don’t know if I want to go stock height or get bags I only want bags because of how dope it is that you can just change the height with the click of a button
As simple as that may sound theres a lot more that goes into having them
@@DanVilla7do you mind elaborating that might make me change my mind. I’ve also thought about coil overs but those need to be readjusted to often so I’m not trynna deal with that.
How much would be a good price to pay for this install?
I can't see a shop doing it for less than 250
Has anyone installed a oil cooler setup yet?
Great vids👍
I’d Love to see the car on a dyno.
Get some real world numbers after all work that’s been.
Thanks!
Does the radar sensor need recalibration?
Not that I'm aware of. But I only disconnected the temp sensor so wouldn't be an issue
Any issues with the sensor after install? Most cars require recalibration after any repair or removal was done
Did you unplug the battery for this install?
Lol it was the first step in the video... someone was skimming....🤣
@@DanVilla7 Oops I did see the whole install though :) thanks for the vid. I have prl charge pipes I will be installing with the intercooler together. Long day
You can do it!
How long did it take you to do that brotha?
About 3 hours with filming
Did you notice any type of difference?
Yeah definitely full review here
th-cam.com/video/-yis_fHEwvw/w-d-xo.html
You were supposed to test everything before putting the bumper back on 🤦🏻♂️ Lucky you that everything was fine !! 😁
I did start it to check for leaks prior to putting the bumper back on
@@DanVilla7 ok good !! Nice car.
11:31 😆 😆 😆
Your average person is not gonna attempt to install that.
Are you sponsored by PRL?
Nope
👍
And all this for absolutely no reason or point...