2018 Honda Accord 1.5t HKS Blow off Valve Install
ฝัง
- เผยแพร่เมื่อ 1 เม.ย. 2020
- Honda Accord 2018 1.5t Blow off Valve install
Tools
1. ratchet
2. sockets 10 & 12 mm
3. ratchet extension set
4. Flathead & Philip head screwdriver
5. T30 Torx bit (for the BOV bolts)
6. C clap plier
7. impact gun (if you have* not necessary)
8. plastic clip remover
links.
BOV Adapter
www.ebay.com/itm/For-2015-201...
HKS
shop.redline360.com/products/...
Agency Power
www.vividracing.com/agency-po...
Boomba Racing
www.boombaracing.com/2016-2020...
Tools
C-clamp Tool
www.amazon.com/dp/B00Z0DQ04W?...
Torx Bit
www.amazon.com/Ginode-8-Piece...
If you have any more questions about the install DM me on Instagram @sa_zee_ or car owner @La_accord
Subscribe to our channel for new videos, builds of the TLX, KAWASAKI NINJA 500R, ACCORD, MUSTANG, any other car we work on, vlogs, and everything else that we record and share with you.
► Follow the car owner on Instagram @La_accord
►Follow Veein on Instagram @_veein_
►Follow my personal page on Instagram @_sa_zee
►Video editor (ISTIAQ) Instagram @izzysting
►Follow the crew on Instagram @_autonymous_
![[TH] VCT Pacific - Playoffs - Upper Bracket Semifinals // GEN vs T1 | DRX vs PRX](http://i.ytimg.com/vi/9cXUFuLLI8E/mqdefault.jpg)
The gold tape is used for heat deflection, and is used on the areas that have heat. The "cold" air intake does not need that. And the job on the inlet side is not close to being flush. Chunks of tape folds popping out everywhere. In the video you said take your time. I would redo that whole thing, and remove it from the intake and where that AEM badge proud
I did this installation on my 2018 1.5 Honda Accord 6 speed manual. After the installation I actually went immediately on a road trip. My Honda has no tune btw. I noticed no turbo lag, no stutter between shifts, the performance of the vehicle is not fucked. I also did not need any adapter that this gentleman said you need. It was a perfect fit and nothing is wrong with my vehicle after the long drive.
Do u have more info on how u put it on without adapter i wana do this to my 1.5t too
@@Xccord I just installed as it, i took out the old blow off valve and installed the new bigger hose and the of course the new blow off valve. i did a few test drives and good as gold. i unfortunately totaled my Accord, so i no longer have the 1.5t. i now have a 2023 subaru wrx.
you da goat i was about to start sweating looking for an adapter
1:50 ur boy is wildin LOL
LMAOO HES pretty weird bro
Veein Garage Eskot bas atala3o 😂😂😂😂
Must be fun to have a bro like that😍🤣
Steph Lg oh yah 😉
You boys are doing great work. I have a 2018 Accord Im slowly working on and have not made it under the hood yet But I like what you have done on your accord, it's "sic" (yes Im old).
Lol thanks 🙏🏽
I have a 2.0t so im not sure if the installation would be the same. I imagine it is. Do you remember what size flange adapter is required?
Keep an eye and ear out for your power steering. The first time I installed mine, it pinched the line, and almost immediately sent a fault code. I ended up replacing the line with a different hose I cut to reroute it out of the way to give it clearance. That BOV adapter is key, to the install. I ran mine for a while, it sounded amazing but performance wise, it suffered. It was like having a big boost leak because of the vent to atmosphere.
Aces_King you didn't run it with an adapter ? Also can I hear how yours sounded
@@ahmedwasir2223 yes, but there's a huge difference in the Quality and Fitment. Cheap adapters won't sit the bov right and will ultimately fail. I'm not running a bov right now but you can go to my IG and check out the sound clips @aces_kng
Bro your car is 🔥🔥I couldn't find a video on your hks bov tho
Beautiful bro sounds 🔥
Thanks
Lots of people here asking about if its bad. Not all cars will act the same, but If you vent to atmosphere without a tune it can harm the performance. Might feel like you have a boost leak... it might even stall out on you if you have a manual when you do a pull then come to a stop sign, again all cars are different but these cars came with a recirculating bov, so if you dont want to get a tune for the bov vent to atmosphere then keep it recirculating.
Yep, also yes got the car tuned
Nice, I figured you had it tuned. Just thought id help out people here asking the same thing. Btw ik you have a custom tune, but do you know if its even worth getting ktune? Just bought my accord 2.0t & looking to modify, but am new to honda scene. Idk how ktune stuff works but people say its simpler than custom dyno tune. I come from a land of supras & standalone ecu😁. Nice channel btw subbed for future content.
Ik this is 4 years ago we have the same engine but is it possible to swap the stock turbo for a aftermarket
Being a 10th Gen is the blow off valve not damaging the engine?
What is another good adapter cause the one you linked is available anymore
Does the blowoff valve work for 2.0t accords?
Do you by any chance still have that stock bypass valve? I see you’re located in, I might be interested in purchasing it off you
Let me look for it
1:06 you said to take out the windshield washer reservoir but that was the coolant reservoir you shook the windshield washer reservoir. Not trying to be negative or anything just wanted to correct that error
Ya no problem but look at the bottom left corner of the screen. At 1:16
2:06 the moaning 😂😂😂
Is it properly installed ? It doesn't seem to sound right like in other videos
Ya it is, working fine 👍🏼
The HKS iconic whistle, can’t hear it either, probably because of how he wanted to set it up, but as long as it functions good and well
The “iconic hks whistle” is the sound the bov makes when you install the whistle tip. Hks makes different tips that make different sounds. I installed one in my 89 supra, but liked the normal “woosh” sound better.
Nice bro it sounds great , good video 🤙
Thank you very much!
Thank you brother
I have one and im planning to get the recirculating kit. Did it make youre car run rich at all?
Not really
What exhaust is on it? Should make a video on it
Abdel Rodriguez custom
If you unplug that hose does it stututu
I was trying to do this yesterday but the t30 on the left hand side there's barely any room and I can't get my ratchet straight any tips
Yep its a bitch
Is there a kit u can buy with piping that u can install the hks on the top next to the intake like I seen on 1.5t civics?
Might have to get on custom made 🤔
Just a question, how is that aem cold air intake working for you? Is it good?
Works just fine bro no issues at all
First mod you should have bought was a 2.0t lol sounds nice tho
Which heat wrap did you use? I hear some of the cheap stuff isn't worth the money or effort
You should do a drive by pushing it
Was there a sudden drop in your PSI boost? after you installed the HKS BOV?
No
Where did you buy the valve? I'm interested, thanks
hks website
Yo i did this install for my bud . Do you have to va the car tunned? I got a check engine light p2187 is this what happens
Ya ktuner stage 2
How’d you get burble bro ? Res delete plus downpipe ?
💪🏾💪🏾 got you thanks, i might not straight pipe but i might have to get the aftermarket muffler
Is this a stock honda
the moaning😂
Lol best part
Thing sounds like a 1999 Ford F-150 with a broken exhaust manifold
Lmfaoo thats very specific 😂
@@VEEIN it is very specific, and oh so spot on 😂
😂😂😂😂😂😂😂😂😂
How much HP YOUR GETTING
will this work for my 2018 accord 2.0?
Idk
Can you do this to a stock 2019 honda accord
I dont think so
@@VEEIN they’re basically the same car tho? They’re both 1.5’s
Same thing
You don’t have paddle shifters tho
@@jaythegreat4944 I do have paddle shifters
Can you tell me what front lip this accord has?
www.ebay.com/itm/392847564235
@@VEEIN wow I thought it was gonna be a lot more expensive koo mayne Thank You
Lol no problem
Can ya do this to my car ? 🥴 Lmaoo love your videos ! 👍🏻
hit me up on insta @la_accord! and thank you
Is it rev friendly?
Yea
the link for the adapter is to a civic and it still fits?
Yea
Old vid but if you do summ like this again, get the sound of it while under load (driving) I’m guessing it’ll make a much bigger difference when the motors actually making lots of boost.
The owner making his own channel so i never recorded a full vid
currently own a stock turbo 1.5 liter accord, is it safe to install a hks blow off valve if I'm stock
I wouldn’t suggest it, especially without a ktuner
@@VEEIN then what do you suggest doing before installing a blow off valve , i just got a cold air intake. What else would I need?
Get a ktuner lol trust me it will change ur life 😂
@@VEEIN just a Ktuner? And do you have a video on how to install it?
Don't do a ktuner if your Accord is a CVT. Not unless you have the CVT cooler. You'll destroy your trans.
What exhaust you used on honda?
Prl down pipe, function work front pipe the straight back, stage 2 on ktuner
Any Check light on?
Nope
Any luck for a 2.0T?
I don't think they make it for the 2.0..🤷♂️
this is a universal kit!
The way he moan s had me rolling lol but ya
Lol
Does this work on the 2.0 2021 model?
Not sure 🤔
You have to drive it to hear the bov properly
I know but The owner making his own channel so i never recorded a full vid
Where did you get the front grill
Christian Sabbagh Honda bro
What front lip is that?
Resonator and muffler delete? If not what you got? Sounds good bro
prl catless dp and functionwerk fp!
Do u do stuff for sound urself or is there some type of performance shop u go to? I wanna do stuff for sound to mine but I have no clue what I’m doing
I can do most stuff but when it comes to welding i go to a shop lol
That gold rap honestly looks ridiculous. Tell your boy to take that ish off...🤦♂️
It looks fine, just added insulation
it’s not for looks, gold wrapping helps keep it cooler faster after being so hot, cold air intake will do its job much more efficient with it on.
it’s not for looks, gold wrapping helps keep it cooler faster after being so hot, cold air intake will do its job much more efficient with it on.
Hey what’s up guys!
Fiza Jamil hello
Which application/notes did you apply to it? I'm trying to order my blow off valve for a 2020 Honda Accord Sport 1.5t.
@@VEEIN so application being universal then there is the notes portion being ssqv4 adaptor flange, ssqv4 flange pipe, and so forth. Its in the proimporttuners website.
Gold wrapping the intake hose. and that too on a 1.5 ..lmao
U will hear it better In drive
Are those aftermarket headlights or tint?
AR J no tints bro just side marker tint
@@ahmedwasir2223 where did you purchase it?
AR J cruxmotorsports
Can’t really hear it when the hood is closed.
Hit up @la_accord if you want more vids of it goin sututututu
How can I get this installed if I buy it ?
Veein Garage no bro I’m out in Cali. I wonder if shops will do it
@@VEEIN are you in nyc? am palnning on buying 2018 honda civic sport touring can you help me out with the sound ?
sorry about the late reply! for sure shoot me a dm on @la_accord
That is the Coolant reservoir BTW
Ik I accidentally said it, check the the screen is said it.
I’m newer to cars and stuff but how does a blow off valve work on cars without a turbo? I’ve seen stuff online saying it doesn’t work for on naturally aspirated engines, and with a cold air intake does that allow cars to get a blow off valve?
It does have a turbo
Blow off valves are for turbos they release pressure, if the car has no turbo, no blow of valve. You can get somewhat spool noises with a cold air
The boomba bov sounds louder
Yea that’s cool too I think it’s just personal preference lol
8:02
All that work to sound like a 96 Ford Escort...🤣
Bro chill
I’m weak asf😭
@@ybz9816 🤣🤣✊🏾
I was trying to install it and I gave up, I have the 2.0T 6mt
Took me 4 hours lol. Almost gave up
Pay someone, got it 👍🏻👍🏻 lol f reaching in that shit 😂😂
Lmfaoo
@@socalspade21 do i need to get it tuned? I herd it makes your engine run rich and clogs up the cat overtime. That true?
My stock bov is louder some how
The boomba sounds better and easier to Install .
To each their own man, Def easier to install.
Why didn't you just take off the waste gate actuator
Not the same thing and codes pop up too
Is this safe?
I would use a condom just to be safe. Lol but yea its safe if you are on stage 2 on ktuner
@@VEEIN lol thx
Screwed with warranty if u have one !!
Nah I'm good if I have to go through that much I'll just pass I don't want one that bad 😆
Lmfaoo
That’s the coolant reservoir
Ya I said windshield washer fluid by accident
barely hear anything....like what was the real purpose
Blow off valves are bad for these cars
Why
No there not they are design for these type of cars tko
@@kingpanda5974 they are bad do your research
Rip engine life
@@Danny392_ explain why then genius since everyone in the comments a mf mechanic now lmao
Not sure about this one. Nice tho
BOV's are a no no for these cars.
Why not?
@@christianalvarado1341 because they use a recirculation system and the car will run rich or lean with a bov
I wonder why they don't make it for a 2.0
@@bornxwood213 they do make it for the 2.0t
@@silverspec what will happen i just got one for mine 2.0t but i haven't installed it yet
Nice car, nice job, not worth the effort.
Captain Obvious I mean hey, it's quarentine so it kept us occupied
Well you got a point
😂
I might be wrong.. but that’s going to ruin that car. The accords use BPV’s not BOV’s.. unless he’s tuning it immediately it’s going to fuck that thing up.
Been tuned, he got a ktuner on stage 2
LX or sport?
Jonathan Batista sport
@@ahmedwasir2223 oh ok was wondering cuz the sport came with fogs
Jonathan Batista mine are tinted
@@ahmedwasir2223 oh iight. Thanks for the respond bro
1:50 😂
Good lord that engine is weak…tough to really do anything with an econobox
Lol
Thats the worst sounding hks bov i have ever hurd 😆
😂 wtf 😂moaning
Ew wtf
Right
True ricer lol
Methawat hks bovs are rice now ? 😂
This sounds terrible 😞