Remember when I said that purchases in Brazil over 50USD would be taxed at 92%? Now purchases below 50USD will be taxed at 42.5% By the end of the year it will be 100% for >= 50USD and 50% for everything else. Government officials want to provide "equality" for the internal market. It's easier to screw the poor more than lower taxes for companies. This type of policy brought several factories from Intel, Apple, TSMC to Brazil, no... wait... In fact, what happened was Sony and Ford and many others leaving the country😓
equality... thats a fucking lie, they just want to fill their pockets with tax money and give a few Importers that are in bed with them tax free imports so they can as well rip you off with 2X prices while they pay nothing for them overseas... they are taking notes from here in uruguay where for absolutely no reason more than greed we gotta pay 2X anything imported where there wont EVER be local production for that stuff
Bought this board based on your recommendations, as I needed a mATX variant and this was the only one that didn't have glaring issues on the channel. It's mostly worked a treat, although for whatever reason when using Mi899 presets to get TBU working, it'll freeze after 10-15 minutes of routine load. Resetting to default in the BIOS keeps TBU working and fixed my stability problems. Currently have a E5-2699 V3 that I have configured to 16c/16t that runs at 3.4-3.6GHz under full load.
@@Miyconst it really is! Wish I read the AVX offset better though, as it ends up clocking a bit lower then lesser core counts, but I believe the increased L3 cache makes up some of the difference! It’s at the point where it’s mostly memory limited when running games like BFV/BF1.
@Miyconst Gotcha, I searched for the last few weeks and came up empty as well... but as we already know you can run gen 4 nvme on pcie 3 but your speeds will be 3500 mbs, not 7000 mbs. And 4.0 gpu"s only lose 2-5% performance in 3.0 which is not major... Thanks buddy, had to ask you bc you seem like you know your mobos
@@Kevin-vh6nn If you need Gen 4, cheapest option would be Maxsun B550m Terminator mobo with a Ryzen 5000 series CPU (NOT the 5500, or any APU). But for most people, gen 4 is not necessary, if you're on a budget then Gen 3 is still more than enough for most use cases.
I had a couple issues with this new board revision. System freezes in about 1 minute with original BIOS, completely solved with the old BIOS revision. And I couldn't boot with RAM 2400MHz quad channel with a 2680 V4 doesn't matter what I tried, even CL17 3N. With 2133MHz I can get CL12 1N.
I have this motherboard paired with a xeon in a proxmox server, no issues with quad channel either. I have all the m.2 slots populated and wireless installed. My only complaint is the positioning/orientation of the SATA connectors. I have a GPU for llm workloads and only 4 of the SATA connectors are accessible.
I'm planning to upgrade my current kit (i3-9100F/32gb 2400 DDR4/ASUS Prime B365) and I'm seriously interested in this for the giblets. You can find it on AE in a combo with a E2680 for $82, and 64GB 2400 MHz ECC RAM for another $75. The 3rd M.2 slot is a big bonus.
Hi Miyconst, I was able to buy and programme the CH341A to flash the original bios in the chip of my Huanazhi X99 QD4. However, I still have a black screen, what else can be the cause? Could it be the cpu? I appreciate your comment, best regard
reviews for chinese boards are valid just for the single batch, maybe a couple of units, then they change some component on the next 100 units made and so on, sad reality, the 2 qd4 i bought both died within a couple weeks
I think I broke my QD4 trying to flash bios for TBU, when I start the computer, the fans gets on but no display (tried removing CPU, RAM, SSD, CMOS etc). I'm getting a CH341a to check what happened. Do you know where the EPROM chip is on the motherboard ?
I wonder why they switched the x4 slot to the chipset. The CPU should have more than enough channels to support direct connection, even with 3 M.2 slots.
Hello excelente video.. great.. can i ask you where did you get that cooler intel ?? i have the Huananzhi motherboard QD4 old version... and got a Woobid cooler low profile ... 6 pipes... because the vrm sometimes is hot.. i use a Intel Xeon E5 2697A v4 ... is a power processor... so i see your cooler and where you get that..?? Thank you
@@Miyconst I'm from France and in September I will be able to switch out my current internet box and we have an operator called "Free" which have an offer for 10Gig fiber and has a 10Gig port SFP+ to plug a PC on it. I'm checking my aliexpress coupons :D
Typo warning! In the time line you list the year of the revision as 2014 not 2024... Figure I'd point that out to prevent confusion for new comers... Otherwise great video as always!
Very nice review. About the wrong power consumption from iengineer BIOS I agree with you that it is a bit on the low side. However, at 135W on the wall I would say 85-90 is expected depending on the GPU idle power and PSU efficiency. It is not the stock BIOS a bit biased in the opposite direction, judging from what i saw in the video? Thanks
@@Miyconst taking that into acount I agree with you. Maybe with an older, more power hungry gpu it could have been the case. I would say your wall meter reading minus 15W (gpu at idle, ssd, etc) multiplied by 0.8 (psu losses plus power phase conversion losses) is a decent estimation of real CPU power consumption
I see that they're both what you call "flower" type cooler and "C-type" downdraft cooler (like the thermalright SI-100 for example). Do you consider them to be the same thing or do you make a difference ? If they're different, what "flower" like cooler would you advise that we can find on the market ?
Technically these two are different cooler types, I am just generalizing here. Both options have their pros and cons. The true flower like mostly have less cooling capacity and don't have heat pipes but the airflow is slightly better for VRM cooling.
Hi Miyconst, I had my Huananzhi X99 QD4 functioning all right with 2667-V3 cpu turboboosted for the last three months. A week ago, my PSU died and I had to buy a new 80plus bronce psu. However, when I replaced the psu, got no screen display but fan coolers were working. I am afraid I have a bricked motherboard. What should I do? Maybe I can revert the original bios? I would appreciate your advise
It's more likely that your PSU also killed the motherboard, also could be the other way around. The motherboard fried and killed the PSU. Anyway, this video shows how to unbrick a motherboard. th-cam.com/video/4qX2zihB6UE/w-d-xo.htmlsi=Jg10atPuGcnuxgAg
Are you talking about this motherboard? Qiyida E5-A99 - a pleasant surprise with a detailed review of the motherboard th-cam.com/video/3eVSYuw_5Pg/w-d-xo.html
Have you by any chance stumbled on quad CPU motherboards of this particular flavour in any of the online shops? I could not find anything yesterday, but for some reason I can swear I've seen it somewhere. I'm just not sure if it was in my dreams or not.
Cześć! Co myślisz o Jingsha x99 e-max. Wydaje się być to fajna tania płyta na cheapset x99. Problem może być z dobraniem chłodzenia bo port pcie jest bardzo blisko socketu i karta graficzna może przeszkadzać. (Mam fortis 3) Spodobała mi się też jingsha x99 D8I Ewentualnie taniej machinist x99 pr9. Planuję użyć e5 2690 v3 z chłodzeniem foris 3. Co myślisz o tych płytach? Pozdrawiam
Chipset itself doesn't make a motherboard better or worse. If the extra X99 chipset features are not implemented on the motherboard it doesn't make a difference what is the chipset. D8i was not tested by me either, thus I can't recommend it. In general, I personally prefer to stay away from Jginyue products.
@@Miyconst and bro what is should buy. 2680v4 or 2690v3. i work a lot in Photoshop and sometimes render video. i stop playing games few years ago but sometimes maybe i will play again
I think a saw mention to an H5 on some video, it was 3 motherboard all like the same, so you spoke about one. But I think you right, maybe was not h5 but other label. The model is showing me to be at 32 eur on 17jun. For that is promising all possible issues with Chinese boards, but I have a few spare CPUs to play with that.
@@Miyconst Yes , i bought their server boards before 7 years ago, struggled with it. not sure if they improved today , looking around for a board that can support high performance consumer chip like Ryzen 7950x / 9950x
The TBU method works the same but you need an external flash programmer like CH341a to write modded BIOS as most branded boards will prevent you from flashing non original options.
I have not had any but I heard rumours that some Asus can be flashed with AfuDos and some Gigabyte with certain BIOS version don't have integrity check.
Hey there Im a student and currently in a state where every bit of my money counts (i have a bit of money saved), so with that in mind, could you please tell me the best x99 aliexpress motherboard and cpu combo to go for? Ill be getting a second hand cheap rx 580 to pair with it. Also planning to get 2 sticks of killsre 8gb ddr4 ram. Ill be using my PC for my studies and doing gaming (i ideally want to run newest games best settings 1080p above 30fps). You are an expert so your help will be greatly appreciated 💙
If you can't afford loosing your money - stay away from AliExpress. Whatever you buy from Ali is a lottery. Still, if you insist, then Machinist X99-PR9 with a V4 Xeon would be my recommendation. If you want specific links - text me on Discord.
I build my girlfriend a gaming pc with the X99-D4, it ran only 96gb/128gb when using ecc ddr4 32gb stick but runs perfectly quad channel with 4x8gb ddr4 3600Mhz crucial modules. Added the turbo boost unlock mod and the cpu is the 2690v3. Cooling is hyper212evo with pushpull fans, 120mm fan as exaust and 140mm artic fan as intake blowing over the motherboard and vrm, the vrm heatsink and back of the board(with thermal lasergun) read 48-55°c. She loves the pc and with a GTX1070 it runs all games she plays, even if the build is a wanna apple mac in the Aerocool CS-109 :D
@@Miyconst thats the thing i love about it she has 32gb ram and 12c cpu so she can edit video or try rendering images or videos and iits pretty quick. For the same price as the X99 combo with out the ram i could only get i3-10100f with out the board
I am also not finding anything good with m-atx. In my case I want to find a cheap one with sleep mode mode at least, but ideally quad channel, but this already asking to much
Remember when I said that purchases in Brazil over 50USD would be taxed at 92%? Now purchases below 50USD will be taxed at 42.5%
By the end of the year it will be 100% for >= 50USD and 50% for everything else.
Government officials want to provide "equality" for the internal market. It's easier to screw the poor more than lower taxes for companies.
This type of policy brought several factories from Intel, Apple, TSMC to Brazil, no... wait... In fact, what happened was Sony and Ford and many others leaving the country😓
Man, that's a disaster, you gotta do something with this government.
equality... thats a fucking lie, they just want to fill their pockets with tax money and give a few Importers that are in bed with them tax free imports so they can as well rip you off with 2X prices while they pay nothing for them overseas...
they are taking notes from here in uruguay where for absolutely no reason more than greed we gotta pay 2X anything imported where there wont EVER be local production for that stuff
Bought this board based on your recommendations, as I needed a mATX variant and this was the only one that didn't have glaring issues on the channel. It's mostly worked a treat, although for whatever reason when using Mi899 presets to get TBU working, it'll freeze after 10-15 minutes of routine load. Resetting to default in the BIOS keeps TBU working and fixed my stability problems. Currently have a E5-2699 V3 that I have configured to 16c/16t that runs at 3.4-3.6GHz under full load.
That's a great CPU!
@@Miyconst it really is! Wish I read the AVX offset better though, as it ends up clocking a bit lower then lesser core counts, but I believe the increased L3 cache makes up some of the difference! It’s at the point where it’s mostly memory limited when running games like BFV/BF1.
*Great video, I agree, 3 NVME slots are overkill, would've preferred a X1 PCIE, thanks will stick to Machinst MR9A/Pros for now*
Are there any x99 boards that have pcie 4, gen 4 nvme and support type c without using pcie slots?
No. That's theoretically not possible. All LGA 2011-3 CPUs support maximum PCI-E 3.0.
@Miyconst
Gotcha, I searched for the last few weeks and came up empty as well... but as we already know you can run gen 4 nvme on pcie 3 but your speeds will be 3500 mbs, not 7000 mbs. And 4.0 gpu"s only lose 2-5% performance in 3.0 which is not major...
Thanks buddy, had to ask you bc you seem like you know your mobos
@@Kevin-vh6nn If you need Gen 4, cheapest option would be Maxsun B550m Terminator mobo with a Ryzen 5000 series CPU (NOT the 5500, or any APU). But for most people, gen 4 is not necessary, if you're on a budget then Gen 3 is still more than enough for most use cases.
I had a couple issues with this new board revision. System freezes in about 1 minute with original BIOS, completely solved with the old BIOS revision. And I couldn't boot with RAM 2400MHz quad channel with a 2680 V4 doesn't matter what I tried, even CL17 3N. With 2133MHz I can get CL12 1N.
Thanks for the feedback. Seems like the memory traces on this motherboard aren't that great.
thank you for the video god of xeons! great quality and great content as always!!! keep up.
thanks again for a great review on this board
Always great videos bless you man.
Muy interesante y claro reseña 👍
I have this motherboard paired with a xeon in a proxmox server, no issues with quad channel either. I have all the m.2 slots populated and wireless installed. My only complaint is the positioning/orientation of the SATA connectors. I have a GPU for llm workloads and only 4 of the SATA connectors are accessible.
I'm planning to upgrade my current kit (i3-9100F/32gb 2400 DDR4/ASUS Prime B365) and I'm seriously interested in this for the giblets. You can find it on AE in a combo with a E2680 for $82, and 64GB 2400 MHz ECC RAM for another $75. The 3rd M.2 slot is a big bonus.
Is this still the most recommended x99 motherboard from AE?
Please watch the video 😀
If you need Micro ATX, yes, if your case will fit a full ATX mobo, Machinist MR9A/MR9A Pro is a better option.
I got more xeon builds coming both x56 and x79 and x99
the one issue with this updated QD4 is if the GPU is too big, you will lose access to 2 of the SATA ports
Hi Miyconst, I was able to buy and programme the CH341A to flash the original bios in the chip of my Huanazhi X99 QD4. However, I still have a black screen, what else can be the cause? Could it be the cpu? I appreciate your comment, best regard
Boa tarde, realmente está placa ficou boa.Um abraço
reviews for chinese boards are valid just for the single batch, maybe a couple of units, then they change some component on the next 100 units made and so on, sad reality, the 2 qd4 i bought both died within a couple weeks
Yeah.. that's really sad. Even the "top tier" X99-F8 faces the same fate.
that sucks.
This kinda happen to some extent to their consumer (h61/h81) board
I think I broke my QD4 trying to flash bios for TBU, when I start the computer, the fans gets on but no display (tried removing CPU, RAM, SSD, CMOS etc). I'm getting a CH341a to check what happened. Do you know where the EPROM chip is on the motherboard ?
Could you please test the compatibility of Jginyue AM4 B550 Mini ITX board with the latest X3D models. From 5600x3d to 5800x3d.
I don't have the motherboard anymore, so I can't test it, sorry.
Thanks for the wonderful content, 2 questions: do you have tpm 2.0 for Mr9s? And is there shipping to Brazil?
I don't have modules yet but it's in production. Shipping to Brazil is possible.
I wonder why they switched the x4 slot to the chipset. The CPU should have more than enough channels to support direct connection, even with 3 M.2 slots.
Because of the PCB complexity and price.
Hello excelente video.. great.. can i ask you where did you get that cooler intel ?? i have the Huananzhi motherboard QD4 old version... and got a Woobid cooler low profile ... 6 pipes... because the vrm sometimes is hot.. i use a Intel Xeon E5 2697A v4 ... is a power processor... so i see your cooler and where you get that..?? Thank you
That cooler is an Intel OEM part, I got it from a scraped workstation, not possible to buy anymore.
Which is better choice HUANANZHI X99 QD4 or MACHINIST RS9?
I would personally go with QD4.
Whats the best chinese "x99" motherboard for gaming performance, turbo unlock and quad channel performence?
With this layout, you can have a 3 slot GPU and put a 10G NIC card. 4 lanes of PCIE 2.0 should give you 16Gbit/s transfert speed at max.
Indeed you can.
@@Miyconst I'm from France and in September I will be able to switch out my current internet box and we have an operator called "Free" which have an offer for 10Gig fiber and has a 10Gig port SFP+ to plug a PC on it. I'm checking my aliexpress coupons :D
3 slot gpu likely will block 2 lowest sata ports on the QD4
@@marcc5768 I only use NVME drives on this motherboard.
@@sourcilavise3788 didn't mean just you, but for potential other interested ppl that looks at the mobo
Typo warning! In the time line you list the year of the revision as 2014 not 2024... Figure I'd point that out to prevent confusion for new comers... Otherwise great video as always!
Thanks! The typo is fixed now.
How is it possible to overclock by multiplier if the chipset doesn't know how to overclock?
Chipset has nothing to do about it, it's CPU and BIOS features.
I bought a lga 1155 mobo for the same price as a x99 mobo on a 67% sale, a Huge L for me
It seems to me that MR9a is still a better MB. I had the original QD4 with a defective audio. Its BIOS was fine.
That's kinda what I said, if mATX is not a must, then MR9A is a better option in my opinion.
@@Miyconst Please don't forget to test the 16 series Xeon with the Intel Turbo Max 3.0!
I have trouble understanding the difference between V3 and V4 CPUs. You have to use a V3 to be able to do the trick for all core turbo boost ?
Yes. V4 does not support TBU.
So i can install the 2024 version bios on the orginal QD4 motherboard ? What will be the difference ?
It should be compatible but I see no reason in doing so.
Very nice review. About the wrong power consumption from iengineer BIOS I agree with you that it is a bit on the low side. However, at 135W on the wall I would say 85-90 is expected depending on the GPU idle power and PSU efficiency. It is not the stock BIOS a bit biased in the opposite direction, judging from what i saw in the video? Thanks
I tested with an Nvidia GT710, do you think it can suck that much juice? I really doubt.
@@Miyconst taking that into acount I agree with you. Maybe with an older, more power hungry gpu it could have been the case. I would say your wall meter reading minus 15W (gpu at idle, ssd, etc) multiplied by 0.8 (psu losses plus power phase conversion losses) is a decent estimation of real CPU power consumption
I see that they're both what you call "flower" type cooler and "C-type" downdraft cooler (like the thermalright SI-100 for example). Do you consider them to be the same thing or do you make a difference ? If they're different, what "flower" like cooler would you advise that we can find on the market ?
Technically these two are different cooler types, I am just generalizing here. Both options have their pros and cons. The true flower like mostly have less cooling capacity and don't have heat pipes but the airflow is slightly better for VRM cooling.
@@Miyconst I guess it's an intel TS13A cooler you put on this setup, what is the maximum TDP you got out of your socket 2011 CPUs with this cooler ?
Hi Miyconst, I had my Huananzhi X99 QD4 functioning all right with 2667-V3 cpu turboboosted for the last three months. A week ago, my PSU died and I had to buy a new 80plus bronce psu. However, when I replaced the psu, got no screen display but fan coolers were working. I am afraid I have a bricked motherboard. What should I do? Maybe I can revert the original bios? I would appreciate your advise
It's more likely that your PSU also killed the motherboard, also could be the other way around. The motherboard fried and killed the PSU. Anyway, this video shows how to unbrick a motherboard. th-cam.com/video/4qX2zihB6UE/w-d-xo.htmlsi=Jg10atPuGcnuxgAg
@@Miyconst thank you. I will check the video
looks really similar to the g629a and h629 motherboards
also in the previous video for TPM module I was referring to g629a as the qd4 clone
In that case the reversed TPM 2.0 module might be compatible with the clone.
Dear friend, can I update my x99 qd4 bios 10-10-2022 version to the 2024 bios X99-QD4V0.1693H 24-03-09? Is rebar will be present in bios?
I cannot guarantee any BIOS compatibility when it comes to the Chinese motherboards. It should work but it may also brick your board.
@@Miyconst thanks for the quick reply friend.
👍
I recently found a MSI X99A-PRO mb with i7-5960X cpu . Is it still any good ?
That really depends on the price.
@@Miyconst I already have it, it was thrown away and I found it.
Can I use the m.2 wifi slot to install the cable m.2 A+E key wifi to pcie and install a 2.5g lan card?
Theoretically - yes, practically - I didn't test it.
Hello, could you see Qiyida A99 has a good price, and there are no good reviews on TH-cam about this board.
Are you talking about this motherboard? Qiyida E5-A99 - a pleasant surprise with a detailed review of the motherboard
th-cam.com/video/3eVSYuw_5Pg/w-d-xo.html
@@Miyconst If this motherboard is the one I'm talking about, the video is only public for members, I suppose it will be public later.
@@8AGeek yes, the video will be public the next Friday.
Have you by any chance stumbled on quad CPU motherboards of this particular flavour in any of the online shops? I could not find anything yesterday, but for some reason I can swear I've seen it somewhere. I'm just not sure if it was in my dreams or not.
Do you mean quad CPU motherboard from China? No, I have not seen such.
@@Miyconst meh. Thanks for your response anyway.
Cześć!
Co myślisz o Jingsha x99 e-max. Wydaje się być to fajna tania płyta na cheapset x99. Problem może być z dobraniem chłodzenia bo port pcie jest bardzo blisko socketu i karta graficzna może przeszkadzać. (Mam fortis 3)
Spodobała mi się też jingsha x99 D8I
Ewentualnie taniej machinist x99 pr9.
Planuję użyć e5 2690 v3 z chłodzeniem foris 3. Co myślisz o tych płytach?
Pozdrawiam
Dodam że chciałbym użyć turbo boost
Hi. I did not test Jginsha X99E Max so I don't have much to say about it.
@@Miyconst Thanks for answer. So... What do u thing about jingsha x99 d8i, the chipset is x99, not q87 like in e8i, so it seems to be better
Chipset itself doesn't make a motherboard better or worse. If the extra X99 chipset features are not implemented on the motherboard it doesn't make a difference what is the chipset. D8i was not tested by me either, thus I can't recommend it. In general, I personally prefer to stay away from Jginyue products.
@@Miyconst you're right, thank you for your help
what would be the best and cheapest option for x99?
The best by what metric?
qd4 with 2680v4 and rx5700xt will it last long? have i to worry about durability? or should i invest in bd4
You always need to care and worry about longevity whenever you buy anything from AliExpress.
@@Miyconst and bro what is should buy. 2680v4 or 2690v3. i work a lot in Photoshop and sometimes render video. i stop playing games few years ago but sometimes maybe i will play again
@@Miyconst 2680v4 is 10€ more expensive
E5-2690 V3 requires TBU, consumes significantly more power, and performance is slightly better. Now you can decide what's more valuable for you. 😀
can someone remind what video talks about X99-H5 ?
I don't think I have tested this exact motherboard, that's probably why you can't find the review link.
I think a saw mention to an H5 on some video, it was 3 motherboard all like the same, so you spoke about one. But I think you right, maybe was not h5 but other label. The model is showing me to be at 32 eur on 17jun. For that is promising all possible issues with Chinese boards, but I have a few spare CPUs to play with that.
Do they have high performance consumer boards like for Ryzen 9750x
Who? Huananzhi?
@@Miyconst Yes , i bought their server boards before 7 years ago, struggled with it. not sure if they improved today , looking around for a board that can support high performance consumer chip like Ryzen 7950x / 9950x
If you are paying this much for a CPU, why not buy a decent high end board for it?
@@Miyconst Okay, gonna stick to Asus then HAHA thanks!
Hey why only CHinese X99. Do you know anything about unlocking Turbo on western X99 boards like MSI X99A or Gigabyte GA-X99 ??
The TBU method works the same but you need an external flash programmer like CH341a to write modded BIOS as most branded boards will prevent you from flashing non original options.
@@Miyconst you mean the most but is there any single one that allows that ?
I have not had any but I heard rumours that some Asus can be flashed with AfuDos and some Gigabyte with certain BIOS version don't have integrity check.
Hey there
Im a student and currently in a state where every bit of my money counts (i have a bit of money saved), so with that in mind, could you please tell me the best x99 aliexpress motherboard and cpu combo to go for? Ill be getting a second hand cheap rx 580 to pair with it. Also planning to get 2 sticks of killsre 8gb ddr4 ram. Ill be using my PC for my studies and doing gaming (i ideally want to run newest games best settings 1080p above 30fps).
You are an expert so your help will be greatly appreciated 💙
If you can't afford loosing your money - stay away from AliExpress. Whatever you buy from Ali is a lottery. Still, if you insist, then Machinist X99-PR9 with a V4 Xeon would be my recommendation. If you want specific links - text me on Discord.
Hey there I just joined your server as unknown apocalypse@@Miyconst
Tutorial overclock mobo machinist X99 MR9S
Я звичайно вибачаюсь, але чому не державною?!))
Я звичайно вибачаюсь, але чи можна перейти за посиланням під відео? 😂🇺🇦
@@Miyconst сорі, звик що обидві версії виходять на одному каналі, підпишусь також на другий)
Why are all these motherboards called X99? There is no x99 chipset?!..
Probably because the name sells and Chinese want to sell.
@@Miyconst My MSI X99 SLI PLUS motherboard just failed. What is a good replacement for this? So i can use my i7 5820K again.
@@mlonster take a look at this one: th-cam.com/video/3eVSYuw_5Pg/w-d-xo.htmlfeature=shared
I build my girlfriend a gaming pc with the X99-D4, it ran only 96gb/128gb when using ecc ddr4 32gb stick but runs perfectly quad channel with 4x8gb ddr4 3600Mhz crucial modules. Added the turbo boost unlock mod and the cpu is the 2690v3. Cooling is hyper212evo with pushpull fans, 120mm fan as exaust and 140mm artic fan as intake blowing over the motherboard and vrm, the vrm heatsink and back of the board(with thermal lasergun) read 48-55°c.
She loves the pc and with a GTX1070 it runs all games she plays, even if the build is a wanna apple mac in the Aerocool CS-109 :D
That's a lovely build for very little money!
@@Miyconst thats the thing i love about it she has 32gb ram and 12c cpu so she can edit video or try rendering images or videos and iits pretty quick. For the same price as the X99 combo with out the ram i could only get i3-10100f with out the board
Who, in their right mind, uses X99?
For example me.
People who need lots of PCIe lanes, for example
А чому припинили викладати контент українською мовою?
Посилання до Української версії в описі до відео. 😀🇺🇦
what x99 m-atx mobos would you recomend ? machinist p4 ?
E5 G7
There are no perfect mATX board, all come with different compromises, so you have to pick what's more important for you.
I am also not finding anything good with m-atx. In my case I want to find a cheap one with sleep mode mode at least, but ideally quad channel, but this already asking to much
@@nmocruz try a machinist pr9 or p4
@@comiumapedra5397 PR9 seems to not have sleep mode and P4 I need to have look