@@RuskiWeldFab when making composites can i make 2 parts independently and cure them Then join the two parts?? But I am wondering whether I bond them with a special glue or with normal resin? And does the final part end up being weaker than when done all together?
@user-eg6rm4zh2o yes you can. there are a number of diffrent adhesives you can use. depending on the part and how they are joined it might be even stronger.
Next time, tape up the foam with release tape before you start putting resin/carbon on it. It'll prevent the foam from sticking to the carbon. It'll just pop out, all at once.
TRuly Amazing work skill set and ArTiesT ~! Bravooo on all that you are doing,,i was on the fence but after watching you the extra down force and having it meet my standards is 100% bad aaaaassss Thank you
Amazing! Privjet! Your skills are far too good for buildings cars, make some videos with improuvements on singleseaters and prototypes! Really well done!
I'm only 3 minutes in and I'm really worried that your "juices" will effect the curing time of the resin....or at the very least stain the kevlar......
here is where i made my splitter endplates th-cam.com/video/9JbozjU9b7g/w-d-xo.html
7:20 this man is next level he's growing carbon fiber bumpers in his garden 😂 air dam looks like it'll provide less drag now. Good work!
haha not the season yet expecting some fruity parts in spring haha
@@RuskiWeldFab 🤣🤣
Hey friend, we see you from Colombia and we love the videos. We are also building a clio for competition. Thanks for showing us how to do it, big hug.
looks like an early v8 supercar air dam, very cool
does have that vibe doesnt it.
@@RuskiWeldFab it's a cool vibe to have!
air dam looking damn good 💪🏽 Great job Ilya
cheers man!
Ill admit, you had me worried at the start that it was just going to be foam and no composites, im glad the kevlar found its way out by the end of it!
just foam? you joking? you must be new here 😂
Just a quick note been watching you vids the splitter is pointing up wen u are under power causing lift , really noticeable at Malory park ,👍👍
Good to know!
Very good very nice.
i like!
@@RuskiWeldFab when making composites can i make 2 parts independently and cure them
Then join the two parts??
But I am wondering whether I bond them with a special glue or with normal resin?
And does the final part end up being weaker than when done all together?
@user-eg6rm4zh2o yes you can. there are a number of diffrent adhesives you can use. depending on the part and how they are joined it might be even stronger.
Next time, tape up the foam with release tape before you start putting resin/carbon on it.
It'll prevent the foam from sticking to the carbon.
It'll just pop out, all at once.
great tip! thank you
Good looking Air dam ❤️
cheers!
Looking really great man.
thanks±!
This is brilliant! When I get my Cerbera back I’ll drop you a message to get a proper front splitter and air dam made 👌🏻👏🏻
ill be here!
thank, you for you're video. Random vanners. east coast of virginia. 2%
Good work
thank you!!!
Great work as always 😎
thank you!
Looks awesome 👍👍👌👌
yeah man
TRuly Amazing work skill set and ArTiesT ~! Bravooo on all that you are doing,,i was on the fence but after watching you the extra down force and having it meet my standards is 100% bad aaaaassss Thank you
Thank you so much 😀
Do you do any parts for EG Honda Civic ?
i do custom parts nothing car specific generaly
Looks awesome 😎🤘🏻
glad you approve!
use cellotex or kingspan insulation board its a bugger if your sanding it indoors because it will make you itch REALLY bad
Someone's making splitter tunnels!!!
yep made at same time. video out soon
Amazing! Privjet! Your skills are far too good for buildings cars, make some videos with improuvements on singleseaters and prototypes! Really well done!
Thanks for the idea!
🎉
⚒
I'm only 3 minutes in and I'm really worried that your "juices" will effect the curing time of the resin....or at the very least stain the kevlar......
hahah juices make it! like an artist signature lol
Ha ha! Tied to your project by DNA!