Mines reads Cylinder 2 misfire. I have a 2016 chevy cruze. It only recently started to do this. I checked the spark plugs coils are clean. Now this video is very informative my mechanic wanted to get off changing the entire plug system for 950$
another satisfied viewer here I have a 1.4 L Sonic RS and tonight after work first start up it was running like crap first P0171 then P0303 flashing . I have some performance mods on the car and I noticed on spirited driving it would feel like it was cutting out but I couldn't tell for sure now I no I have a ultra gauge hooked up so I can check ✔️ certain things but I will for sure look at that harness thanks
@@s33therfan believe it or not it was the coil I had a zz performance coil on the car and I thought no way it could be that? Turns out it was the coil I put my stock coil back in and I'm sending the ZZ one back under 2-year warranty so the sucker went out in less than 2 years and with only about maybe 25,000 miles
Great video I have the same car and this same thing is happening to me expect the harness tab is broken on my the car is firing fine but the check engine light is still on I’m going to check the wires asap thanks for the tip
Hey I’m having issues I have a 2016 Chevy Cruze limited 1.4 . I got an oil change and tire rotation last Tuesday , the same day , my traction control and stabilitrak lights came on and check engine light started blinking , my fuel level is depriving. before all this I would fill up and get almost 400 Miles now my tank says full at 280 miles , I changed ignition coil pack bc cylinder one keeps coming back misfiring even after coil pack was changed it’s running very rough
The traction control warning is definitely related to the tire rotation if it was fine before. The other more immediate issue with the missfire., needs to be addressed. I have seen 2 of these cars recent with either coil pack 7 pin plug issue or harness issue. I would start with the 7 pin coil plug replacement they are notorious to cause this. Replacement requires soldering in a new one which is not hard but tedious and time consuming. Here is link to the 7 pin plug. amzn.to/3F2bzif
@@s33therfan hey ok so I check all of this: the wheel speed sensors was ok , I changed the battery(from a friend car) to see if that was the problem : I checked fuel pressure , I have no coil pack , no damage to either of plugs , I had my throttle body cleaned , I just the lil spray air machine to check for vaccum leak ,(NONE) but I do hear a hissing noise (like a air machine for tires) , my fuel injectors are good , I change my coolant tank cause it did have a small whole at the bottom . I also checked my fuel tank , no hole , no oil leaks under the car or in any parts my oil is good , all the wires are plugged in , I have a new mass air flow sensor . All the fuses are good I checked the wires on pcm it’s good , my valve cover is good (it doesn’t suck in air& there’s no sign of oil or leaks around it , I even tried to find a way to reset , I drove with out it coming on but when you switch the car off and back on the stabili and traction light both come on with flashing engine light , i don’t know what to do atp , the codes I’m getting p0301 P2301 & occasionally P0599 , it keeps saying misfire it 1 & thermostat pressure , idk what to do atp
Did u notice that your car started vibrating noticeably more when driving? Happening in my 2016 1.4 cruze LT. Mechanic said it's piston 1 misfire and it'll cost 8k to fix it
Would you please give us the sequence of the cylinder numbers? Is number 1 the far left cylinder as you face the engine? What cylinder follows after that?
1-2-3-4, left to right. identification for inline in always "front" to "rear" (Transmission is always connected at "rear" Firing order is something like 1-3-4-2.
So I just picked up an aftermarket connector/pigtail with all white wires. What would be the easiest method in this situation? Cut at a certain point and match up each wire?
Yes , do one at a time starting from left to right or other etc. If it is an aftermarket make absolute sure the connector locks on to the coil pack properly before soldering it on. Thanks for the feedback.
@@s33therfan excellent advice! I did just the way you said and it was a breeze. Only difference is I used but connectors and used a small torch to melt them down after crimping them then wrapped the entire bundle in loom and electrical tape.
For mine, all of the above. Then stopped for a week, then restarted and croaked completely. 2014 chevy cruze 1.4l turbo codes p0300, p2076, p0171 and p0324 Changed coil pack as per AutoZone and head gasket with PCV attached to no avail.
Im hoping this is my problem. I've just replaced the turbo, the oil and coolant lines on the turbo, the thermostat, the valve cover, the v3.4 pcv fix, new spark plugs, new battery, and new coil pack. I had no check engine light finally then after some light aggressive driving noticed it would sputter at 3500-4000 rpm and the check engine light would flash but go away, now its on and stays on with code P0300 random multiple misfires. So sad after putting $1300 worth of parts into it. There are still plenty of issues that can cause a misfire I don't know what else to do.
Yes , replacing this 7 pin connector may be your issue as well. I have another video where I replaced the entire harness to fix my issue. Thanks for watching. here's the video th-cam.com/video/Pbahvfk0z98/w-d-xo.html
I'm getting this on my 2018 1.8l chevy sonic with only 21000 miles. I had filled up with 2.2 gal of bad gas 12 days ago. I purged the system of this gas but ever since then I'm getting this pending code p0301 sporadically. I pulled the plug and it looked fine to me so now I'm now thinking the bad gas messed up that one injector?
I wouldn't think so , it may just need to have some injector cleaner ran through. Worse case it may need to be taken out and cleaned. I really haven't came across this problem from bad gas . It could also be the bad gas issue caused another problem to rear its head. I would check everything from plugs to coils while you're at it. Hope you get it solved . Thanks for watching.
i have a 2015 Chevy Cruze Lt 1.4 tubro i have replaced spark plugs and coil pack no luck on my dashboard it says service stabilizer and traction control took out new spark plugs to check them soaked in gas not sure why that is
Try replacing this next . Sounds like no spark. If this doesn't work , you may have to replace the harness. The service stabilizer does not affect the engines missfire , entirely seperate issue. Hope this helps. amzn.to/47ltLkM
Where can I find that same connector on my 2012 malibu..I have a po301. Engine running rough. Plugs and coils were change, fixed p0013 and p0014. Im stuck, please help! Thanks
i had this problem last year on my 2016 malibu. service stabilitrak light comes on flashing engine light follows. changed spark plugs and all 4 coil packs. flash forward a year and the same problem shows up again
Pick up a cheap 40w pencil iron, much easier to work with for small wires. I use a Hakko 888 but I do a lot of electrical work so the $100 investment paid for itself.
Had the same problem every thing was fixed new sparks plugs and replaced my coil pack never check my wires I should tell my mechanic thankyou man💯
Yes , I believe this is a common problem. I have had 2 with harness issues . Thank you for watching.
Mines reads Cylinder 2 misfire.
I have a 2016 chevy cruze. It only recently started to do this. I checked the spark plugs coils are clean. Now this video is very informative my mechanic wanted to get off changing the entire plug system for 950$
Hope you get it solved quickly , thank you for watching.
Did it fix the problem
I'm really glad I came across your video, I was having the exact same problem with my 2016 Cruze 1.8. Thank you very much for sharing this with us.
Glad the video could be of help. Thank you for the great feedback.
This could be the problem on my 2015 Chevy Trax. Thanks for the video!
Thank you for watching.
@@s33therfan It ended up being the coil pack, but great video nonetheless!
Thanks man, means a lot your experience shared with us !
Respect!
I really appreciate you taking the time to leave terrific feedback , thank you.
another satisfied viewer here I have a 1.4 L Sonic RS and tonight after work first start up it was running like crap first P0171 then P0303 flashing .
I have some performance mods on the car and I noticed on spirited driving it would feel like it was cutting out but I couldn't tell for sure now I no I have a ultra gauge hooked up so I can check ✔️ certain things but I will for sure look at that harness thanks
Thank you for sharing your experience and the great feedback.
@@s33therfan believe it or not it was the coil I had a zz performance coil on the car and I thought no way it could be that? Turns out it was the coil I put my stock coil back in and I'm sending the ZZ one back under 2-year warranty so the sucker went out in less than 2 years and with only about maybe 25,000 miles
Great video I have the same car and this same thing is happening to me expect the harness tab is broken on my the car is firing fine but the check engine light is still on I’m going to check the wires asap thanks for the tip
Best of luck , thank you for the feedback.
Hey I’m having issues I have a 2016 Chevy Cruze limited 1.4 . I got an oil change and tire rotation last Tuesday , the same day , my traction control and stabilitrak lights came on and check engine light started blinking , my fuel level is depriving. before all this I would fill up and get almost 400 Miles now my tank says full at 280 miles , I changed ignition coil pack bc cylinder one keeps coming back misfiring even after coil pack was changed it’s running very rough
The traction control warning is definitely related to the tire rotation if it was fine before. The other more immediate issue with the missfire., needs to be addressed. I have seen 2 of these cars recent with either coil pack 7 pin plug issue or harness issue. I would start with the 7 pin coil plug replacement they are notorious to cause this. Replacement requires soldering in a new one which is not hard but tedious and time consuming. Here is link to the 7 pin plug.
amzn.to/3F2bzif
@@s33therfan hey ok so I check all of this: the wheel speed sensors was ok , I changed the battery(from a friend car) to see if that was the problem : I checked fuel pressure , I have no coil pack , no damage to either of plugs , I had my throttle body cleaned , I just the lil spray air machine to check for vaccum leak ,(NONE) but I do hear a hissing noise (like a air machine for tires) , my fuel injectors are good , I change my coolant tank cause it did have a small whole at the bottom . I also checked my fuel tank , no hole , no oil leaks under the car or in any parts my oil is good , all the wires are plugged in , I have a new mass air flow sensor . All the fuses are good I checked the wires on pcm it’s good , my valve cover is good (it doesn’t suck in air& there’s no sign of oil or leaks around it , I even tried to find a way to reset , I drove with out it coming on but when you switch the car off and back on the stabili and traction light both come on with flashing engine light , i don’t know what to do atp , the codes I’m getting p0301 P2301 & occasionally P0599 , it keeps saying misfire it 1 & thermostat pressure , idk what to do atp
@@Myqueshaful having the same issue did you get that problem fixed?
Did u notice that your car started vibrating noticeably more when driving? Happening in my 2016 1.4 cruze LT. Mechanic said it's piston 1 misfire and it'll cost 8k to fix it
Would you please give us the sequence of the cylinder numbers? Is number 1 the far left cylinder as you face the engine? What cylinder follows after that?
1-2-3-4, left to right. identification for inline in always "front" to "rear" (Transmission is always connected at "rear"
Firing order is something like 1-3-4-2.
1-3-4-2
So I just picked up an aftermarket connector/pigtail with all white wires. What would be the easiest method in this situation? Cut at a certain point and match up each wire?
Yes , do one at a time starting from left to right or other etc. If it is an aftermarket make absolute sure the connector locks on to the coil pack properly before soldering it on. Thanks for the feedback.
@@s33therfan excellent advice! I did just the way you said and it was a breeze. Only difference is I used but connectors and used a small torch to melt them down after crimping them then wrapped the entire bundle in loom and electrical tape.
What was the issues you were receiving? Shaking? Accerlation issue?
It basically ran so rough it could not be driven. Thanks for watching.
For mine, all of the above. Then stopped for a week, then restarted and croaked completely.
2014 chevy cruze 1.4l turbo codes p0300, p2076, p0171 and p0324
Changed coil pack as per AutoZone and head gasket with PCV attached to no avail.
Good to know.
Start small and work your way up.
Absolutely , thank you for the feedback.
Im hoping this is my problem. I've just replaced the turbo, the oil and coolant lines on the turbo, the thermostat, the valve cover, the v3.4 pcv fix, new spark plugs, new battery, and new coil pack. I had no check engine light finally then after some light aggressive driving noticed it would sputter at 3500-4000 rpm and the check engine light would flash but go away, now its on and stays on with code P0300 random multiple misfires. So sad after putting $1300 worth of parts into it. There are still plenty of issues that can cause a misfire I don't know what else to do.
Yes , replacing this 7 pin connector may be your issue as well. I have another video where I replaced the entire harness to fix my issue. Thanks for watching.
here's the video
th-cam.com/video/Pbahvfk0z98/w-d-xo.html
Amazing help, thank you
Thank you very much for watching.
I'm getting this on my 2018 1.8l chevy sonic with only 21000 miles. I had filled up with 2.2 gal of bad gas 12 days ago. I purged the system of this gas but ever since then I'm getting this pending code p0301 sporadically. I pulled the plug and it looked fine to me so now I'm now thinking the bad gas messed up that one injector?
I wouldn't think so , it may just need to have some injector cleaner ran through. Worse case it may need to be taken out and cleaned. I really haven't came across this problem from bad gas . It could also be the bad gas issue caused another problem to rear its head. I would check everything from plugs to coils while you're at it. Hope you get it solved . Thanks for watching.
i have a 2015 Chevy Cruze Lt 1.4 tubro i have replaced spark plugs and coil pack no luck on my dashboard it says service stabilizer and traction control took out new spark plugs to check them soaked in gas not sure why that is
Try replacing this next . Sounds like no spark. If this doesn't work , you may have to replace the harness. The service stabilizer does not affect the engines missfire , entirely seperate issue. Hope this helps.
amzn.to/47ltLkM
Here is another video I made , I actually replaced the entire harness due to a short it had.
th-cam.com/video/Pbahvfk0z98/w-d-xo.html
Where can I find that same connector on my 2012 malibu..I have a po301. Engine running rough. Plugs and coils were change, fixed p0013 and p0014. Im stuck, please help! Thanks
Heres a link to the plug .
Look at this on eBay
www.ebay.com/itm/362924493533
Thank you for watching.
@@s33therfan thanks for your response, I will look it up and try it. Thank you so much, you are appreciated! Cyndi
Did it fix the problem
100 % . Thanks for watching.
i had this problem last year on my 2016 malibu. service stabilitrak light comes on flashing engine light follows. changed spark plugs and all 4 coil packs. flash forward a year and the same problem shows up again
Thank you for sharing , hope you get the issue resolved.
I have seen a couple with the same problem
Thank you for the feedback and thanks for watching.
Pick up a cheap 40w pencil iron, much easier to work with for small wires. I use a Hakko 888 but I do a lot of electrical work so the $100 investment paid for itself.
Thanks for the information , I appreciate it.
👌
How to test the wires
Hello .i have the same car can you please send the wiring diagram 7pin to me ..thanks
Ignition coil wiring schematics | Chevrolet Cruze Forums
www.cruzetalk.com/threads/ignition-coil-wiring-schematics.229730/
Thanks for watching.
Nice video
Thank you for watching.
Just had this but in mine the piston broke off inside the engine thankfully it was under warranty or I would have paid 8000 dollars
Thank you for the feedback.