"Service traction control" message Chevy Cruze p0301
ฝัง
- เผยแพร่เมื่อ 9 เม.ย. 2022
- If you are getting a service traction control message on your dash and the car shakes and sputters. check to see if you have an engine code p0301-4 cylinder misfire. This video will walk you through how to get it fixed.
Check out this list Misc items from videos from thebluecollarlife www.amazon.com/shop/theblueco... - แนวปฏิบัติและการใช้ชีวิต
Had this happen to me on the way home from a concert last night. Watched your video, ordered the parts and fixed it this morning. Problem resolved, thanks!!! Man I was worried it was something way worse!!!
Heck yeah man, that's awesome! Makes making these videos totally worth it when I get feedback like this! 🍻
Just had that happen to me. Except mine was a p0300 and p0303 with all the messages. Replaced plugs and coil pack original gm part for 90 bucks and 40 for plugs and so far so good 👍 this video just helped me confirm my suspicions
Nice man glad you got it fixed!
I.need help I just replaced the spark plugs and coil pack and new negative cable still get the same thing on my dashboard service traction control and stability control any help would be appreciated ty
@@dancurrier6421 have you checked your alternator? Those things are crap. If its not producing proper charge it will throw those codes too. I eventually ended up crashing the cruze into a deer and just went out and got a 2022 Hyundai elantra 🤷♂️ the cruze just has way too many problems.
One thing to check on those coil packs before buying a new one, pull the rubber tubes out. There are little cylinder/capacitor (not sure what it is) and see if it is damages. Mine was all rusted and had wires poking out. I replaced my coil pack, and my issue was resolved. That was a year ago.
Great comment, especially for others looking for info. 🍻
Really good cause I’m bout to check mine. I’ve replaced my coil pack and plugs and oil keeps getting in my spark plugs. The plugs usually fix the problem but nope not this time.
@@brianjohnson7327 have you fixed the issue? I also changed spark plugs and coil pack (not GM part from Amazon) and I currently still have that cylinder 1 misfire with oil on that spark plug. I changed the gasket too! Thinking there was a leak bc the cover was chipped.
Yup, every time with these cruzes, coil pack.
Very helpful i got same message been having msd coil pack about a year on my car now they are doing the same car misfiring time to change mine 😢
At least the job is easy 😬
When you ordered your spark plugs were they all 4 together or you ordered them piece by piece?
I purchased 4 of the same individually.
i have a 2015 euinox that threw the same code ran a full bottle of sea foam cleaner in it everything cleared up no lights on been about two weeks no problems
It's pretty crazy that this code represents so many different issues! In the end all that matters is you got it figured out! 🍻
@@T_B_C_L yes its crazy...
Welcome to Chevy Cruze life, the 1.8 is a pain in the butt. I'm at 150,000 and I've already put three sets of coil packs from Amazon. I'm starting to think that I might need to go buy the expensive ones. The cheap Amazon ones are not that great they don't last long
I've went through 2 of them as well. I guess you get what you pay for... 😂 🤣
U get what u pay for! Cause i had the same exact issue lol now im getting the oem coil pack n plugs. Learned my lesson after investing $10,000 into the car and only has not even 120k miles
@@tatianaperry-coley2040 yup, I'm going OEM if it happens again.
When I was getting the ABS and traction control messages Chevy actually told me that that happens sometimes if it's extremely cold out and at the time my ambient air temperature sensor had not been put in yet the new one and it was reading -40 so there's actually nothing wrong with mine I just can't get the message off my screen
You should be able to get rid of the message with any simple scan tool that is capable of this. I use a Bluetooth obdII adapter that utilizes the torque app to clear codes. I paid like $15 off of ebay like 10 years ago.
Everything you said happens to my Cruze -40 stability control and misfire 1
@@ismaelcastillo43 well hopefully this video will help you to fix it cheap! 😁
I have a 2016 cruze eco and first my brakes started squeeking, then about 1,000 miles later i get service traction control message 🔧, when i pulled over my car shakes think its my tires. Did i press something by mistake?
Squeezing brakes are probably not related but just a coincidence. You may have same issue I had. You need to pull the codes if you have a check engine light.
I have a 2013 Chevy Cruze. When I drive for 20+ minutes at a time mostly on the high way going 75+ mph the service stabili trak, flashing check engine, and service traction control comes on. Recently it’s been doing a whining noise on accelerattion after those things pop up. But after it sits and chills for an hour or more it’s fine until I have to drive it at higher speeds and longer distances. I have had the spark plugs and coil packs all changed and a new catalytic converter put it. But it’s still doing the same thing. Mechanics at the dealership can never seem to find anything wrong with it and tell me it’s fine only for it to continue to do it. Is there anything you can think of for me to check or ask the dealership to specifically check?
The only thing that comes to mind is maybe you have a Crack in your turbo somewhere, or possibly an intake leak. Sucks that the dealerships are no help. Maybe try another one because they are definitely not all the same. Wish I could be more help. Hope you figure it out.
I used a amazon coil pack and that exactly why im having to replace it again a year later bettter to use autozone for electrical parts . I have 2014 chevy cruze 1.4 lt dashlights on engine light flashes than service stabilitrak and service traction control
Yes I tend to agree. I went cheap from Amazon because I wasn't sure if that was the problem. If the problem was to happen again I would definitely try to get a better quality part.
So I changed my spark plugs but car still shacking doing the same thing ..what should I do next ??
Did you change the coil pack? Also you may have a dead cylinder. You might want to do a compression check on each cylinder.
hello i have replaced. Spark plugs,coil pack , , negative battery,, traction control switch , code on my scan tool Po303 and still has service traction control and stability control on my dashboard. Checked out my spark plugs again they are soaked very wet not sure if its a bad fuel injectors or my fuel pump i know my fuel pump is on its way out gas gauge doesn't work once in awhile
I'm guessing you mean wet as in fuel? If so is it all the plugs or just some?
not sure if it's fuel or oil but all 4 plugs were wet it was just number 3 cylinder. it was driving good all day starting to come home from my sisters going up hill and then all of a sudden started running like crap loss of power check engine light and service traction control and stability control on dashboard just barely made it back home not sure what to do with it right now. if I put gas in it gas gauge once in awhile will say empty after I just put in $25 in it any help would be appreciated ty
@@dancurrier6421 if it's just number 3 cylinder I bet it's a stuck open injector. You also might want to check compression. I don't have any experience with these going bad on a Chevy cruze but in the past these were 2 things to check when having fouled plugs.
I'm not a mechanic but how do you check for compression test
@@dancurrier6421 you will need a compression tests set. You can get one from Amazon or harbor freight. It will have a Guage and different size threads and hoses to fit different cars. You will pull the spark plug out screw in the hose attached to the pressure Guage, and turn the car over with the coil pack disconnected. This will test the compression and make sure your rings are not bad. If compression is low then rings are bad allowing oil to move past the rings causes spark plug to foul. That's a super short explanation but I hope it makes sense.
Is this also the reason why there is alot of oil around the oil housing mines is the same just curious why this is happening as well
I'm not really sure what you mean by oil housing?
What about the exhaust leak? Do you find out why is that?! Have same problrm
Unfortunately no, and no longer have the vehicle.
My Chevy Cruze has done this off an on lately. When I turn it off and on again the light doesn't come back on.
Do you have a check engine light?
I’m getting the stabilitrak but I’m not getting no code. The car turns off and on when I’m driving it. What do you think it might be it?
Definitely check the battery, if it has corrosion on the terminals or the battery could be bad. Could also be an ignition issue. Wiggle the key while it's running and parked.
@@T_B_C_L I’ll definitely check it out thanks for the reply
@@christianalt8847did you find out what it was? If it turns off and on when you are driving and come to a stop then it can be your starter. At least that was the problem with mine
I changed my fuel injectors coil packs and plugs ran great for a month now misfire again
Im not sure if this is your case but I have heard of the cheaper coil packs going bad only after a short time. Maybe try replacing it, but purchase it from somewhere that has free returns like Amazon,just incase you gotta return it.
I see a red engine light on at the end of the video you didn’t speak on what was that?
Im pretty sure that's just the parking brake light. I have a habbit of always setting my parking brake.
Mine says "engine power reduced" "trantion control" "stabilitrack" i cant fund the problem alredy change coils,throttle body , spark plugs and still doing the same thing
Wish I could help man. This is my sons car and I've only worked on it a couple of times.
check PCV valves?
Cable negativo canbialos.negativos
I had the same problem traction control reduce power stability Trac. I still can't find the problem.
Im having the same problem what was the solution for you?
I always turn off my traction control (if you hold the button down, it will also turn off stabilitrak).
The problem was the coil pack. I have no idea why it gives that message
Good to know if this occurs in my daughter's '12 Cruze.
Serial Bueno si disease el ano del carro y que motor tiene
2012-16 creo 1.4lt
Yes this is correct
Why the tragic music?😢😢😂
The music is rather sad... 😂 🤣 Gotta love copyright!
I changed the spark plugs and the coil and track control are still on!
Did you pull the trouble codes?
@@T_B_C_L I think the problem is with the computer, I connected OBDII, no connection.