Thanks a million for doing this video. I first cracked a plug towards the front of the box and after filling the 2 liters it was no where near the plug.. micro panic before finding your information ℹ️ Cheers
I did the same. I cracked the one at the front and not the awkward one which he shows you. I also filled it. What happened? Where you able to drain the oil or where did the oil go to
@@albundy6034 When filling the bung at the front (the higher bung), I had only put in the recommended portion of oil. If you open the filler bund at the rear (awkward), the over filling of oil will just drain out. Leave it to drain until the oil is level with the lower thread of the filler bung hole and all will be good.
Hi. I didn't take that awkward one out that you showed and took the one like oppose it on other side drained the oil and then filled it up. Where does this go to and have I damaged anything? Will it still drain from the draining bung
Hi, thanks for watching! The new oil goes in the full hole until it starts to spill out (with the car level), then the fill plug is installed with a new washer and you’re done.
Thanks a million for doing this video. I first cracked a plug towards the front of the box and after filling the 2 liters it was no where near the plug.. micro panic before finding your information ℹ️
Cheers
I did the same. I cracked the one at the front and not the awkward one which he shows you. I also filled it. What happened? Where you able to drain the oil or where did the oil go to
@@albundy6034 When filling the bung at the front (the higher bung), I had only put in the recommended portion of oil. If you open the filler bund at the rear (awkward), the over filling of oil will just drain out. Leave it to drain until the oil is level with the lower thread of the filler bung hole and all will be good.
Hi. I didn't take that awkward one out that you showed and took the one like oppose it on other side drained the oil and then filled it up. Where does this go to and have I damaged anything? Will it still drain from the draining bung
ciao from italy and like
Hi there, thanks for the upload. Where does the new oil get poured in? Thanks
Hi, thanks for watching! The new oil goes in the full hole until it starts to spill out (with the car level), then the fill plug is installed with a new washer and you’re done.
@@YZJB qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq1
@@YZJB qqqqqqqqqqqqqqqqqq
Is this the same process for the ST225. Thanks
Hello
Yes, all exactly the same for the ST225/XR5 Turbo
Thanks for watching
Hi how much oil did it take in the end please
Hello
Just under 2L in the end
Thanks for watching
I hate that fill bolt more than anything in the world. Idk why mine has less room, but I can not get on that even with the lowest profile socket.
Yeah it is tight and for whatever reason it’s harder to access on some cars. Keep trying, you’ll get it!
Thanks for watching
@@YZJB Thanks, yeah I think my end game is to remove the torque mount and shift the engine a bit. Thanks for the video.
@@frostshock13 that's how i did it also :)
your either strong or nuts by getting under a jack supported car. I've had 2 let go.
😅😅