Antique restoration asmr Rusted out Vintage Stove Restoration
ฝัง
- เผยแพร่เมื่อ 1 มี.ค. 2024
- Restoring a vintage Buflam camp stove can be a rewarding project, allowing you to bring a piece of outdoor cooking history back to life. Here's a general guide to help you get started on the restoration process:
1. Assessment:
- Inspect the stove thoroughly to identify any damage, missing parts, or areas that need special attention.
- Take note of the materials used, such as metal, enamel, and any other components2.
2. Cleaning:
- Begin by removing dirt, rust, and old grime from the stove. A wire brush, steel wool, or sandpaper can be useful for this task.
- For stubborn rust, you may use a rust converter to neutralize it.
- Soak removable parts in a mixture of warm water and mild soap to remove grease and dirt.
3. Disassembly:
- If possible, disassemble the stove into its individual components. This will make it easier to clean and restore each part.
- Take pictures or make notes during disassembly to help you remember the correct order when putting it back together.
4. Rust Removal:
- Use rust remover or a vinegar solution to remove rust from metal parts. Be cautious with enamel parts, as harsh chemicals can damage the finish.
- Consider using a rust inhibitor or a clear protective coating on metal surfaces to prevent future rusting.
*5. Enamel Restoration:*
- If the stove has enamel parts, use a gentle enamel cleaner to restore the finish. Be careful not to scratch or damage the enamel during cleaning.
- Polish enamel surfaces to bring back their shine.
6. Replacement Parts:
- If there are missing or irreparably damaged parts, check if replacements are available. You may find vintage stove parts online or consider fabricating replacements if necessary.
7. Paint Touch-Up:
- If the stove has painted surfaces, use heat-resistant paint to touch up any scratches or areas where the paint has worn off.
- Clean the surface thoroughly before applying paint.
8. Reassembly:
- Assemble the stove in the reverse order of disassembly. Use your notes or pictures to guide you.
- Lubricate any moving parts with appropriate lubricants.
9. Testing:
- Before using the stove, perform a test run outdoors to ensure that it functions properly.
- Check for leaks around the stove. Test it in a well-ventilated area.
10. Display or Use:
- Once the restoration is complete and the stove is fully functional, you can choose to display it as a vintage piece or use it for camping and outdoor cooking.
Always prioritize safety during the restoration process, especially if the stove involves gas or other potentially hazardous components. If you are unsure about any aspect of the restoration, seek guidance from experienced individuals or professionals.
#Restoration #Antique #stove - บันเทิง
Thanks for tuning in guys 👍 it's been a while I'm sorry. I have been busy insulating my work shop so I can survive this heat. Hopefully soon I might get back to something more regular.
I am from Brisbane but am living in Ningbo china. I have a Japanese sword, rusty that was found on the beach in Berlin. Would you be interested in restoring it? Let me know and next time i am back in Australia i will bring it.
@@wholefoodplantbasedmama5398 this would be a very interesting project but it's not something I know much about sorry. I suggest looking for someone that specialises in this sort of work. All the best
*_What an amazing video! I have never seen anything like it. I can't imagine how much time went into restoring it, let alone your skill and talent. Bravo!_*
Thanks very much. I can tell you, way too much time was spent on this one. Especially trying to find the time when I wasn't melting in the heat of the workshop. Thanks for tuning in 👍👍👍
It looks amazing Trev ❤️👏👏 I miss these stoves 😁🤗
Thanks very much. I had never seen one like this before.
I think you deliberately restore things that are pizza tray shaped .... Not sure about the cows... New neighbours ? always amazed how many parts there are when you show everything broken down .wish I could restore to this level of finish , genuinely enjoy every moment of your videos . Way better than those other channels that fake their items start condition . With you we get genuine resto / fix/ mend/ restore . Thanks for your honest restorations . Shell grit and super glue us for guitars ... Or is that noodles ? Need some magic bending gloves like yours . Love the green .... Wow what a transformation !!!!!
Thanks very much for all those very kind words Mr toolrestoration. I would have replaced the bottom but I'm out of pizza trays. Would have been far too tricky to bend all those shapes. Yes neighbour moved his cows while there was construction work happening. Sand and super glue, classic useless hack. Really glad to hear you enjoyed it. Those gloves are magic, that's how I get so much done lol. No fake restorations on this channel 👍
Good afternoon my friend. You did a great job of restoration and breathed a second life into this product. I liked it very much. 👌👌👌😉👍👍👍 Good luck to you in your new projects.
Thanks very much. Glad you liked it buddy 👍
You clocked the screws, good on you mate. Well done. 🥃
Lol thanks buddy, yes I did
Really neat restoration. Can’t believe you were able to fix all the holes.
It was a painful job. I was worried when I put that center piece back in that I was going to disturbed something.
Really appreciate the time spent on the editing of this video. Very entertaining. The restore job was excellent as usual and the result speaks for itself.
Thank you Dirge, that's very kind of you to say. This one took forever as its been so hot here. Glad you enjoyed it 😊
Oh mate, I saw all those holes and thought to myself. If it was me I would just give up. Again you showed us how talented you are. You made all that soldering look easy. That stove looks absolutely gorgeous. Well done 👍👌👏
Thanks buddy. It was a painful job, I should have just given up and fixed it with the sand and superglue
You need an old style soldering iron that you heat up in a fire. Lot easier to solder sheet metal. I use them to solder drain pans. If you can't find one let me know, I have several of them.
@@loch1957 thanks for watching and for the advice Loch. I Do have one but I thought it would have made it tricky to repair those holes on the inside.
You amazed me with this , Whoever watches, this video needs to leave a comment and a like. This is perfection right here. Thank you again sir for a fantastic restoration
Thanks Mr George for those very kind words 👍
A really professional result mate. Your skills are awesome. You make all that soldering look easy; and I am fully aware it is not. Great work and another antique saved from the scrap heap.
Thanks very much Shedman. The soldering was a horrible job to do. It wasn't until it was all cleaned up that I could see them all. That's about the time I felt like giving up lol. Thanks for turning in and watching 👍👍👍
これはとても貴重なストーブです!現行の石油ストーブのガラス繊維が含まれた芯を使えると更に長く使えると思います!素晴らしい仕事でした!ありがとうございます!これからも健康に過ごしてください!
Thanks for watching and leaving comment, very much appreciated 😊
A beautiful result! I really liked it 👍
Thank you for watching, very much appreciated 👍
Another great restoration 😊
Thank you for checking it out Richard 👍
Отличная работа!!!👏👏👏
Thanks very much. Always good to see you stop in. I appreciate the support 👍
Además de hacer un gran trabajo de restauración, tienes un muy buen gusto a la hora de decorar y pintar. Bravo una vez mas.
Thanks for tuning in. I'm glad you enjoyed it. Thank you for the compliment 😊
Nicely done. It looks great
Thanks Ivan appreciate you checking it out .
Always amazing you are! I can't even imagine the hours that level of restoration takes. You are truly a Top tier channel.
Took far too long George. Hopefully all the time and effort pays off and I get more views than my last one 👍
@@Austeration I'm sure you'll get a lot of views..I know we will always tune in and watch no matter what project you do. Your videos are always great.
@@Uwannawatch aww you are too kind my friend. I really do appreciate it 👍
Fantastic work on that stove........cool.....❤
Thank you Brian. Took me far too long to get this one out. Appreciate the watch 👍
It looks great and you did a wonderful job restoring it as well!!!!
I enjoyed your video so I gave it a Thumbs Up
Thanks oneshot, always good to hear from you, thanks for the thumbs up 😁
Restaurado fogão buflam vintage 🔥😉
Thank you very much for watching 👍
1. I would have given up already during the disassembly (you really like to suffer) 😅
2. The choice of colors is very nice, I especially like the hammered gray of the frame
3. If all those holes in the tank haven't stopped you, you can do anything
Final result splendid and clean as always, it's a pleasure to follow your work.
Thank you very much for all those kind words. Yes I did suffer lol way too much work, if I pick something simple I don't get the views 😔. I was not sure on the colour to be honest. I sent the wife down to get green paint and that's what she came home with lol. Thanks for your ongoing support, I do appreciate it 👍👍👍
BUEN TRABAJO BUEN VIDEO
Thank you for watching. Hope you enjoyed it 😊
Super jest to odrestaurowane ta stara zabytkowa przed wojenna lampa pozdrawiam serdecznie. 👍👍👍👍👍👍
Thank you very much Andrzej, very much appreciated. If you liked this please check out this project th-cam.com/video/j7oK7tRsano/w-d-xo.htmlsi=napT9vmqrTeXONiT
It has been a very long time since I seen real isinglass.
It was very delicate stuff. Thanks for watching 👍
Good stuff! Wasn’t sure how you could possibly fix all those little rust holes
Thanks Shadow. Hours and hours that took
👍👍👍 Kompliment 👍👍👍
Thanks you very much 👍👍👍
Bonita restauración
Muchas gracias👍
I think I would have soaked that wick in full strength bleach and then have done multiple rinsings in water. Still, you had a beautiful outcome. ☺
Thank you Yana. I think that could have worked but I had already spent too many hours on this one.
Nice
Thank you Kenneth, much appreciated
It came out great, those brackets on top, like of look like bears with their necks extended 😉. Was that sheet mica that you used in the window area ?
That's funny I will have to go back and check out tgd bears now. Yes it was mica I used. Thanks for tuning in and watching David 👍👍
👍👍👍
Thanks for watching 👍
i suggest to use laser cleaner😌
Thanks for watching Vic and for the suggestion. I would love a laser rust remover. If you would like to donate with the Give thanks icon that would be appreciated, those things are very expensive 👍
First
You are indeed Lol. How clever are you ?
@@Austeration Not that clever.. I just sit around waiting for your new videos!
@@Uwannawatch you must that was a tremendous effort buddy. I didn't see that one coming 👍
Oh wow , an original, I have seen the knock off of this stove
The Master, that disassembly was perfect as usual 👌
6:59 😮
Oh boy the bottom..... and those waves
10:27 , epic move , just wow
How does it look Haaa haaa FANTASTIC, great patch work 👍
Did you replace the mica window with plastic sheet?
*No I don't think plastic would last very long before it catches fire and melts all over my fresh paint. 😅 lol*
@@Austeration Well, the new window didn't look particularly like a mica sheet and you never showed it burning with the door shut...
19:51 Door shut
I hear Australian birds
Yes I have bush land around me and they love the trees 😊
👏👍👏👍👏👍👍👏👍👏👍🥃🥃🥃
Thank you for watching 👍👍
Cracking restoration, shame about that puke green paint at the finish............................or was that the original colour?
Thanks for tuning in Kevin. I thought it was the original colour but that's the colour my wife picked up. It's a real vintage looking green.
An impressive restoration. I read your 10 step restoration text. This piece stopped me on step one. Assess, O heck no.
Lol you must be the only one who even looked Paul Thanks for tuning in and checking it out 👍👍👍👍👍
@@Austeration Personal experience with liquid fuel metal founts and the difficulty in finding potential holes keeps me from attempting things this deteriorated. I'm currently fiddling with a bunch of railroad lanterns. The worst one I fixed by epoxying a cut down vegetable can inside original container. The rest of them were good enough that liquid gas tank sealer fixed the leaks. Funny how light will not show thru places where kerosene will seep.
Your text is a good read for those contemplating something like this for the first time.
@@paulhare662 at the end of the day Paul I don't think there is any right or wrong way to fix the holes as long as you give it a go. Using an old can would work for sure. I try and encourage anyone to just have a go, most people are afraid to fail but you only fail by not trying, it's the only way to learn If I could have replaced the bottom of this one without spending too much time and money I would have. Did you see the lantern I did a while back ? This is the first time I have tried putting steps like this in the description so I'm interested to see if it helps anyone.
I appreciate all your comments 👍
@@Austeration Yes, I watched the lantern fix. My soldering skills and tools are not good enough to tackle a job like that. I'm a mig weld it unless it's too thin. If too thin, epoxy it.
@@paulhare662 that's brilliant I don't have the skills or tools to be able to Mig weld but I wish I did. That fix was the first time I had tried anything like that so I was lucky it worked. Took me 12 months to plan it out in my head before I even thought about touching it.
Goof
Thanks
👍
Thanks for checking it out 👍