This was the easiest most simple to follow video and I watched five of them and I have a mechanical engineering degree lol all the others went way too far and we really just unnecessary steps. Yours was easy to follow and perfect. Thank you.
Then you've gotten as much extra exercise I have had, running inside the house, through the front door and out to the car after you've let the garage door down- and vice versa. 😂
How ? It did exactly what it was suppose to do lol. You hold the yellow but if you want to clear the memory. Or you simply just press it to add a new car/remote and go to the remote and click the button you want programmed lol
Nope. Press one time yellow button and then make sure your remote in sync mode. Most of the remotes have reset button on the back of it if you do not you have to press and hold button 1 and 2 until remote LED will turn solid
@@AllanHart land of the blue idiots enforcing the will of the comunists party . I had to leave the peoples republic of new jersey . I grew up in cokesbury
No .. just press the program button on the back of the opener once then press the button on the remote you want to program. The lights flash when the code is accepted
I had a good working temote and after i clear memory I couldn’t program anybof them the video on the steps you did after clearing the memory is confusing
Doesn't say how to prepare hand remote, to communicate with wall command center. Not saying any thing about double garage doors operating on single remote s 😢
Hit the yellow button on the back of the opener that hit the button you wish to program .. when the light on the opener flashes that means your remote or whatever is programed
Hard to tell what you’re saying when you’re mumbling man!!.
Honestly I just randomly uploaded it a work and never even watched it.. I don't know why so many people saw it..
Quick, to the point with zero unnecessary side stories, and very helpful. Thanks!
Thanx!
IKR - the answer in 6 seconds compared to other videos which took 3 minutes, multiple intros/stings/logos and still didn't answer :-)
Thanks for this helpful video. It took me only a few seconds to wipe clean and reprogram remotes.
If you could at least tell us what you’re doing for crying out loud couldn’t hear a damn word you were saying
Sounds like a lot work lol
Thank you for sharing, it works for me after reprogram the 2 remotes!!!! THANK YOU.
This was the easiest most simple to follow video and I watched five of them and I have a mechanical engineering degree lol all the others went way too far and we really just unnecessary steps. Yours was easy to follow and perfect. Thank you.
If you are a mechanical enhineer, you should not have needed a Dummies tutorial.
Bro! Thank you so much! This was perfect and easy only cause you showed me. In the wise words of Denzel “mah man”
Thank you!!!! I've been trying to do this for weeks
Then you've gotten as much extra exercise I have had, running inside the house, through the front door and out to the car after you've let the garage door down- and vice versa. 😂
Thanks! You made it easy for me.😃
Got it to raise up , no affect on returning down
This video is confusing
Useless and infuriating
How ? It did exactly what it was suppose to do lol. You hold the yellow but if you want to clear the memory. Or you simply just press it to add a new car/remote and go to the remote and click the button you want programmed lol
How American teachers teach students
@@Speedycory6 He’s mumbling.
I don't think this guy knew what he was doing. It looks like he just got lucky while he was mumbling to himself.
Nope. Press one time yellow button and then make sure your remote in sync mode. Most of the remotes have reset button on the back of it if you do not you have to press and hold button 1 and 2 until remote LED will turn solid
Good to see you back up
Thanx dude!
@@AllanHart your in jersy? What exit ? Lol. Im in and out to my family farm just below flemington a lot.
@@walterdavis4808 24 on 78 ... Whitehouse station
I'm right next to flemmington
@@AllanHart land of the blue idiots enforcing the will of the comunists party . I had to leave the peoples republic of new jersey . I grew up in cokesbury
Someone has a remote for my garage door opener so I was wondering if I can erase and then use a different code?
Hold the program button until the little yellow light goes out
So my garage door opener learn led isn't operative. Is that necessary?
As long as it still programs it doesn't matter
If I just wanna add a new clicker I don’t hold it down to not delete the old ones right ?
No .. just press the program button on the back of the opener once then press the button on the remote you want to program. The lights flash when the code is accepted
Wipe the memory as is in wipe all remote controls and/or key code numbers as well???
I only do that when I'm installing more than one opener in a 3 car garage and I want to program all 3 remotes to open any door 1 to 3
Don't wipe the memory if you have everything set up already
I usually wipe the memory on a new opener before I start to set it up
10/10 thanks man
I had a good working temote and after i clear memory I couldn’t program anybof them the video on the steps you did after clearing the memory is confusing
I don't want to clean the memory. Just add another opener. How do you do that?
Just push thr yellow button on the back of the machine then push the button on thr remote you wish to program. That's it
@@AllanHart I got it. Thank you!
HEY, what do you do if you want to ad another remote and you don't want to clean the current codes?????????????????????????????
Just push the yellow program button then press the button on the remote you want to program. The lights flash on and off when it is done.
i heard you say something like, you're wiping the memory or code first?
Yes.. if you hold down the yellow button till the light goes out it clears the memory if everything programmed previously
It's the mumbling for me.
Can i use any remote from internet and do programming
No it has to be compatible with Chamberlin openers.. home depo has alot
Can't see what buttons you're hitting after you clear.
Trocious video
The camera work makes it impossible to see what buttons you were pushing, and you go much too fast
Dude You're not alone, you can get some help with your marajuana addiction.
It's called meth
Thanks!
He’s Alive!!!
Hell yea
Thanks
How about showing what buttons you pressed with your fat finger
theres four buttons there how is it that hard for you to tell what he pressed
No it's a secret.
Do not wipe the memory as every time you try to set different remote it will erase the previous one this video is misleading
I only wipe the memory once before i program everything. I should have mentioned that your right
How do I remove the cover.??
Hard
Doesn't say how to prepare hand remote, to communicate with wall command center. Not saying any thing about double garage doors operating on single remote s 😢
Just hit the button it's the same no matter how many you program
You can't even see what you're pushing
Sorry.. it's the yellow circle next to the up and down arrow s
😢
I have absolutely no idea what you were doing.
Hit the yellow button on the back of the opener that hit the button you wish to program .. when the light on the opener flashes that means your remote or whatever is programed
Confusing slow down and actually show what you are pushing to program
WTF did he say?! LMFAO
Two steps. Super easy. Not sure why instruction manual needs 6 steps… and didn’t work
796 Idella Extensions
526 Russell Lights
No help.
347 Stoltenberg Trafficway
Instructions unclear. Currently stuck in a mine shaft.
It’s like he is being forced to make that video. It’s null
982 Moore Parkway
Should take this video down he mumbles, you get a picture of the back of his hand. He’s not telling you what he’s doing.
9694 Brett Extension
6072 Raven Falls
Lift master program up down
McCullough Alley
thanks
What drugs you on dawg
Weed
Oooooo, ASMR
41414 Crawford Manor
This is not a good instruction.
00246 Hansen Drive
Bertha Mountains
14022 Ronny Mill
Terrible 😞
I don't know why all the worst clips get so many views.
Most confusing video I’ve ever seen.
Mumbling, incoherent, bad video
I never watched it... I just took a quick clip at work and uploaded it on the spot. I never expected it would get so my traffic.
Seriously? It’s like the dude is mumbling yo himself.
WTH
18527 Fiona Stream
Wtf is this
Speak up
I know.. I don't know why but all the worst clips get all the views.
Please delete your TH-cam account, save people time
Horrible video 😅
868 Deckow Avenue
73179 Dibbert Ville
98709 Towne Walk