After a garage break-in I needed to reset the opener bc car windows were shattered, cars ransacked, and all the remotes were stolen. I can't thank you enough for putting this info online. THANK YOU FROM THE BOTTOM OF MY HEART.
Thanks for the great vid. I just want to add that depending on the color of your button on the opener, you need to click the button different amounts of time. I was trying your three click and it didn't work on mine. For Yellow button, click once. For Purple Learn button click twice. For Red and Orange click three times. For Green learn buttons click four times. Hope this might help if someone is having the same problem as me.
Thank you! So many people skip the rolling code step in the instructions. Every 5 years or so I get a new Ford vehicle and forget this step. I struggle for a couple of hours trying and searching Google, then finally find the few people who explain everything.
You helped fix in two minutes what I tried to do alone for twenty minutes by searching on the manufacturers site & following the instructions on the side of opener (to no avail.) - thank you Mister Locksmith!
Someone broke into my neighbor's car and stole his remote while our landlords are away on vacation... Thanks to you we were able to figure this out and the thief stole a *now* useless remote! Thank you so much.
Thank you! Got it to work with your help. Liked & Sub'd. **Note: my fob/clicker did not have the pin reset- cover removed for battery access and black button inside there was the reset. However, without watching your video I was not able to figure this part out! Thank you!
Thank you for the tutorial video - it would also be educational if you would show us how to program the remaining buttons for light and whatever else ;-).
Thanks for this VERY informative video! If I erase everything will this also apply to the buttons that open/close the doors? Or does the erase feature only apply to remotest and keypads?
My garage opener is an old 1992 Liftmaster, back says 1140lm - when i push in the button a red light comes on. But no matter how long i hold it in the red light never goes out, blinks, nor any clicking sounds, or the regular lightbulb do anything. I can just hold the button for over a minute and the red light just stays on. Once i let go the red light will go out in about 30 seconds. But i can still use my garage door remote. It's still synced up. Trying to erase the codes inside the garage door opener/motor. We're having issues in neighborhood of ours and neighbors garage doors randomly opening. Appreciate it.
I have the Liftmaster garage door opener that is black with a black circle on top that has the 2 buttons to open/close the door and then a red type rectangle below it and has no light "bulb" like yours does. I didn't know why it wasn't working so I replaced the lithium battery in it. It still didn't work so I deduced that I may have to reprogram it. How do I do it if I don't have a light on it?
The small light "bulb" is behind the "red type rectangle button" / inside the garage opener. Try to push "red type rectangle button" once in the dark, then you can see the light from the small light "bulb".
Mr. Locksmith thank you, my friend. My numerical keypad stopped controlling both of my doors. I can’t get it to work any longer but it blinks the way it’s supposed to when I hold down both the * and # keys like the programming instructions say to do. After that I hit the learn button on the opener then put in my 4 digit code then hit enter but... nothing. How much do you charge for a visit to the east coast.?? HAA
So simple- even I can do it. One tip- to confirm remotes are wiped; press the big button. If it doesn’t work then your golden. If it does; repeat the process.
I followed the exact instructions, after the garage light blinks I press the same key to turn the red light off. But after that my door won’t open via the remote
HELP! Clearing out all codes from the garage opener - I had held my finger on that button over three minutes. Trying the garage opener the door still works the codes haven't been erased. What is another way to clear all codes
My Garage Door Opener - Garage Master Security+ has red learn button, I tried to program the LiftMaster one button (model 971LM), the original remote control, it does not work after replace w a new 3v 2023 battery. Chamberlain one button ( 950ev mc) Chamberlain three buttons ( 953ev ) ----- problem 1 None of the program instructions works. By keeping pushing the button many times under the garage door opener, accidentally got it programmed /reacted. Could the signal be too weak? ----- problem 2 While the garage opener light stays on (always on after garage door was opened or closed), the garage door opener will not response to any click on all remote controls . Once opened door, I had to wait 5 min (on drive way, or in house) for the garage opener light (*) goes off (#) / with a click sound (what is this?), vice versa after the door closed. However, the garage door opener will response to click on the wall mounted button at any time / any condition. ------ Question ?
Is something wrong with the garage opener? Too weak in signal to program / response? Too hot (after each program attempt) to program / response?
I'm having the same problem. I tried doing the same thing but for some reason when I hold down learn button even up to 10-30 seconds I can't get it to erase codes from previous controller.
When I program the remote to the opener it takes 4 clicks to open and to close. I’ve tried different remotes and it’s the same result and I don’t understand why. I’ve cleared the memory of opener and reprogrammed remote and same result
Great video, unfortunately I can't get my remote to program for the life of me, 8/01 production date. It is a security+ and the remote is a security+ 2.0, according to this video it should work.
@@24hrMrLocksmith I did. Thanks for replying but it does not work with every opener or door lift even if Liftmaster says it does. WE have a Liftmaster formula 1 and a liftmaster remote 893LM. One thing I did notice was there is a light bulb on each side of the liftmaster. The light bulb on the learn side will not work even with a new bulb.
After a garage break-in I needed to reset the opener bc car windows were shattered, cars ransacked, and all the remotes were stolen. I can't thank you enough for putting this info online. THANK YOU FROM THE BOTTOM OF MY HEART.
Thank you sir disabled single mom was able to do it from your video
Thank you for the quick straight to the point video much appreciated
Extremely helpful. Easy to follow and got my opener reset on first try!
Thanks for the great vid. I just want to add that depending on the color of your button on the opener, you need to click the button different amounts of time. I was trying your three click and it didn't work on mine. For Yellow button, click once. For Purple Learn button click twice. For Red and Orange click three times. For Green learn buttons click four times. Hope this might help if someone is having the same problem as me.
Thank you so much. So frustrating seeing it blink and doing 3 clicks without any progress. Was purple for me, two clicks worked.
Thank you ×100. I had two remotes with blue lights smh. Yes you did not mention blue lights 👀 . but one was 3 and the other 4 🙃
Thank you! So many people skip the rolling code step in the instructions. Every 5 years or so I get a new Ford vehicle and forget this step. I struggle for a couple of hours trying and searching Google, then finally find the few people who explain everything.
You're welcome!
Thank you so much, I tried several different methods and yours was the only one that worked!
You helped fix in two minutes what I tried to do alone for twenty minutes by searching on the manufacturers site & following the instructions on the side of opener (to no avail.) - thank you Mister Locksmith!
Worked like a Pro
Finally one video that works for my garage door
WOW, the first and only video which actually worked !!! ... thanks !
Thank you for making this vid. You don't know how grateful I am you showed me how to program my opener.
Thanks so much, I’ve been trying for one hour, anyone did not even mention to push 3 times 🙏👍
So thankful to see this ❤❤❤
Great video, easy to follow, straight to the point, short and sweet.
Paul Grant Thanks
Someone broke into my neighbor's car and stole his remote while our landlords are away on vacation... Thanks to you we were able to figure this out and the thief stole a *now* useless remote! Thank you so much.
good job and clearly described ,thanks
Thank you it worked right away
Great and helpful video. Thanks ❤️🙏
Thank you! Got it to work with your help. Liked & Sub'd. **Note: my fob/clicker did not have the pin reset- cover removed for battery access and black button inside there was the reset. However, without watching your video I was not able to figure this part out! Thank you!
Thank you so much! I got both remotes to work!
Awesome video it worked exactly like you said it would
Super helpful thanks! Only difference was mine needed only 2 clicks before pressing any button to program the fob.
Thank you in 2022 !!
LIFE SAVER!!!!
How do you program multiple remotes?
Thx very helpful much better than company website
Thank you for the tutorial video - it would also be educational if you would show us how to program the remaining buttons for light and whatever else ;-).
Thanks for this VERY informative video!
If I erase everything will this also apply to the buttons that open/close the doors? Or does the erase feature only apply to remotest and keypads?
Thanks!!
Gracias hermano, it works
My garage opener is an old 1992 Liftmaster, back says 1140lm - when i push in the button a red light comes on. But no matter how long i hold it in the red light never goes out, blinks, nor any clicking sounds, or the regular lightbulb do anything.
I can just hold the button for over a minute and the red light just stays on. Once i let go the red light will go out in about 30 seconds.
But i can still use my garage door remote. It's still synced up.
Trying to erase the codes inside the garage door opener/motor. We're having issues in neighborhood of ours and neighbors garage doors randomly opening.
Appreciate it.
Thanks this video helped me alot 👍
Really helpful video 👌 I always come back here whenever I need to reset my liftmaster
Hi sir , I just reprogram the keypad control but he can’t reprogram the universal remote control . Could you please help me. How I can do it ?
Do you think a reset may be needed if the doors won’t lock?
Excellent Video, one question, this procedure works with the liftmaster 1215E (red button). thanks
So!! I can use any remote by Liftmaster or Chamberlain to accomplish this?
I have the Liftmaster garage door opener that is black with a black circle on top that has the 2 buttons to open/close the door and then a red type rectangle below it and has no light "bulb" like yours does. I didn't know why it wasn't working so I replaced the lithium battery in it. It still didn't work so I deduced that I may have to reprogram it. How do I do it if I don't have a light on it?
Contact Liftmaster
The small light "bulb" is behind the "red type rectangle button" / inside the garage opener. Try to push "red type rectangle button" once in the dark, then you can see the light from the small light "bulb".
I have a 41A5021-1G unit, how many remotes can work with it, is there a limit?
Thanks
Great video thank you. If you had one that showed how to program a LiftMaster keypad to a LGO high lift opener that would be awesome...!!
James Mason I will add that to the list. I have one that needs to be programmed too.
Mr. Locksmith thank you, my friend. My numerical keypad stopped controlling both of my doors. I can’t get it to work any longer but it blinks the way it’s supposed to when I hold down both the * and # keys like the programming instructions say to do. After that I hit the learn button on the opener then put in my 4 digit code then hit enter but... nothing. How much do you charge for a visit to the east coast.?? HAA
can i programme my garage door remote and the keypad so i can use both them together
So simple- even I can do it.
One tip- to confirm remotes are wiped; press the big button. If it doesn’t work then your golden. If it does; repeat the process.
Thank you!!!!!!!!
I followed the exact instructions, after the garage light blinks I press the same key to turn the red light off. But after that my door won’t open via the remote
Austin Woitte Check your batteries in your fob. If that doesn’t work exchange the remote for a new one.
HELP! Clearing out all codes from the garage opener - I had held my finger on that button over three minutes. Trying the garage opener the door still works the codes haven't been erased.
What is another way to clear all codes
Would erasing the program like at 1:29, erase the pin number for the keypad installed outside the garage?
My Garage Door Opener - Garage Master Security+ has red learn button, I tried to program the
LiftMaster one button (model 971LM), the original remote control, it does not work after replace w a new 3v 2023 battery.
Chamberlain one button ( 950ev mc)
Chamberlain three buttons ( 953ev )
----- problem 1
None of the program instructions works.
By keeping pushing the button many times under the garage door opener, accidentally got it programmed /reacted.
Could the signal be too weak?
----- problem 2
While the garage opener light stays on (always on after garage door was opened or closed), the garage door opener will not response to any click on all remote controls . Once opened door, I had to wait 5 min (on drive way, or in house) for the garage opener light (*) goes off (#) / with a click sound (what is this?), vice versa after the door closed.
However, the garage door opener will response to click on the wall mounted button at any time / any condition.
------ Question ?
Is something wrong with the garage opener? Too weak in signal to program / response? Too hot (after each program attempt) to program / response?
@@aurumdream9693 Time to call the Dealer or your local Garage repair.
all is great!
I'm having the same problem. I tried doing the same thing but for some reason when I hold down learn button even up to 10-30 seconds I can't get it to erase codes from previous controller.
When I program the remote to the opener it takes 4 clicks to open and to close. I’ve tried different remotes and it’s the same result and I don’t understand why. I’ve cleared the memory of opener and reprogrammed remote and same result
Just moved into a place. Good idea to erase all remotes!
Great video, unfortunately I can't get my remote to program for the life of me, 8/01 production date. It is a security+ and the remote is a security+ 2.0, according to this video it should work.
KFStreich Check the LiftMaster website.
My remote is 94335E no led, how I program it's the motor is 5580 model chambaline
What about controlling the lights
What is process for a second remote?
Joe Gill Exactly the same. However, don’t hold the reset button too long or it wipes all codes out of the system.
Sweet ! 😯
What about the elite 700
Or using a chamberlain opener
My red button say "erase button”. Where is the learn button?
This is nothing like my remote or garage door nope we and my unit is from 1998. Ugh
Omg please add some lubricant to you garage doors
djcalcutt Good idea for another video!
😓 according to your title, I think you are teaching how to reprogram and erase the remote but not matching with the opener
Yeah that dont work
Check your model number and the Liftmaster website for more info.
@@24hrMrLocksmith I did. Thanks for replying but it does not work with every opener or door lift even if Liftmaster says it does. WE have a Liftmaster formula 1 and a liftmaster remote 893LM. One thing I did notice was there is a light bulb on each side of the liftmaster. The light bulb on the learn side will not work even with a new bulb.
down force is set way to high
Video title is misleading. It says "how to erase and program a garage door REMOTE". I need to erase my remote, not the opener. This video didn't help.
audio is terrible. Dont speak through a pillow when recording!
Check your audio settings :-)
⁰0