ฝัง
- เผยแพร่เมื่อ 9 ต.ค. 2024
- Hi!
No music. No talking. Just work.
If you are taking your ASUS EEEPC 900 laptop apart be careful and wear an anti-static wrist band or use other anti-static device. If you need to change a LCD usually you don't have to take screen out of a laptop. You can leave it on a laptop and watch the last part of the video where I am taking LCD apart. If you need to change a keyboard, you don't have to take all bottom screws out. There are usually some marks, like a keyboard picture, on a case bottom. If you need to put a laptop back to work be aware of screws. They are different and you better remember or mark them somehow to insure that you will put them back in to a right place.
Some laptops I take apart first time, so don't be serious on my time and performance.
If something got broken - ooops, it's your fault.
Believe me, some parts in your laptop are already broken, you just don't see that.
So, just watch this video and fix your laptop.
Have fun and good luck!!
regazzz #recycling #recycle #upcycling #zerowaste #sustainability #reuse #environment
#handmade #waste #sustainable #diy #vintage #recycled #demolition #upcycle #design #scrap #repair #disassembly #Technology
![โรงเรียนตอนตี 2 โคตรหลอน..!! [โรงเรียนไดเม่]](http://i.ytimg.com/vi/2MAEMwqVYh8/mqdefault.jpg)
Thanks for this video. I have a special place in my heart for this machine. It was my daughters 1st computer and it served her well. Of course that was over 11 years ago. She is all grown up now. Good unit for it's time imho.
Thanks for this video. It really is a big help. ( and I truly appreciate the no music )
Did install W10-32bit on it!! It Isn't fast and it does not install the video driver properly but it does the trick for me.
Great!!!
Hey man, thank you for the video! It was my 1st laptop and now I plan to use its parts for something else!
"I treat my Girlfriend like a High tech Laptop"
**FBI OPEN UP**
I am more surprised that there is a video about this laptop
Thank you! Thank you! Than you! Followed your step and managed to fix my 900A. The plastic posts that hold the rear of the screen hinge had both broken up (bad design I think) and a small part had got into the fan and stopped it running :( All fixed now though, thanks so much for the video! (sent form my 900A) :D
Wow, that's thorough. Thank you.
It looks like if you wanted to add Bluetooth, you could undo the screws off the back and get access without having to undo much more. Does this sound reasonable?
I thought I saw the wi-fi card on the bottom of the little motherboard. I'm not in any need, I am just trying to make this little thing useful again. It was a very good little helper in its day.
Currently running Ubuntu 16.04 in 32 bit just fine and getting on the internet still.
Any thoughts on the access to the w-ifi card?
I am on my phone, can't watch it right now, but if there were two cables coming to the board - that was a wifi card.
@@regazzz definitely the card on the upper left side when turned over.
Do you think you could access that card by removing only the back panel screws?
thanks for the video, wondering if this laptop would turn on without battery
If power cord - should.
Thank you for the video! really usefull and timesaving
Hey! Nice vid! may I ask two questions? First, when I put it all together again, the keyboard doesn't "click in" again. At the time of dissasemblying it, I hadn't watched this video yet, so I kind of figured out the three pin's location. They seem to be alright, but is there a way to know if I broke them? Now the other question is about the charger. Searching online I saw it is 12v 3a, but there were also othes chargers for sale, advertising their compatibility with this laptop, that work at 9.5v 2.5a. Can you please tell me the output of the stock charger? I'm going to test it with others PSUs laying down around my house and don't want to take any risk. Thanks in advance!
Hey man, sorry for.such late response. If the keyboard sits well and not popping out if let's say laptop is upside down - it should be ok. Maybe some pins not clicking anymore but it works. Now to the charger. I would really stick to the 12v the same as original charger. Amps aren't that important because laptop will draw a needed amount. I would just search for used charger for this laptop on eBay if possible. New on e are mostly a shitty chargers from China. But used once still can be good. Hope this helps!
You are very welcome!
Thanks a lot for that video, it was very helpfull for me :)
You are so welcome!
which eee asus laptop doesent have RAM under the first cover, but an HDD drive? Let me know! Thanks!
3:20 вот в этот момент слева важно не оторвать разъёмы аудио ;)
Obrigado!
You are welcome!
I found this computer fun to take apart and then price back together.
4 times
Great video - and great set up and use of equipment there! I followed the directions most of the way through, but my problem is that I cannot power-up the computer at all - I've used another power converter and adaptor with qualities similar to that of the original eeePC 900, but the LEDs do not come on and pressing the power switch (and the resest button)...nothing happens. So, even though I followed your directions, nothing. I don't have the electrical knowledge to work out the source of the problem. If you - or others - have any ideas, I'd appreciate them. Without any further ideas, I'll just end up throwing it away as it's a paperweight now... :(
Blv Tzpk was your eeepc in working condition before taking it apart? Are you sure this adapter is compatible with original one?
Does any battery light or power light come up if plug in?
1. Hard to know, as it was completely discharged.
2. The adaptor was the original one supplied with the unit.
3. No lights appeared at all. Nothing blinking - nothing.
There can be many things that can be affected. One, or more at the same time.
Before a i pull out the touch pad ribbon cable, do you just pull on the blue strip? or does something flip up. also how does it go back together?
What are you using to hold you cam like that? let me know, Ive been looking for something like this for a while now.
Eddie Kalin Hello, I just bought some metal plate from HomeDepot and that's it. Screwing my camera to it.
you are welcome!!!
I don't know why,but I can't take off that cover on 3:27, ot seems like it is stuck,however i removed those audio inputs succesfully.What is the problem?
I did this recently and now my touchpad is unresponsive not sure if I didn't connect the ribbon cable properly is there a way to check without taking it apart again thanks
Aapaki shop kaha he mere bhi asus eee pc 904hd ka screen badlana hai
I did this recently and my touchpad isn't responding is there away to find out if I connected the ribbon cable right without taking it apart again thanks
I removed wireless card around 5.09... I will point it for you with annotation at that point.
Saludos , tengo un problema con la Asus eee reenviado ,al encenderla la pantalla se puso en blanco
Hi, I have an Asus Eee PC 1000HE. There is a problem with the left mouse button on the track-pad; It either doesn't work or I have to press it more firmly towards the bottom of the button for it to work. Do you know how I can fix this? Is this is a motherboard issue or an issue with the trackpad itself? It's really bugging me!
Thanks!
the problem with 1000he netbook that mouse buttons are placed on motherboard - so, it is pretty inconvenient if mouse buttons are not working, because for the most users it means - change motherboard. You may try a different palmrest, but I think finally you will end up changing motherboard too.
Oh... that really sucks. :(
Yep!
pleze tell me which on of those things the wireless is ?
I have bought this laptop used, but it has a BIOS password do you think opening it then removing the CMOS battery will work?
You may check online what other people will tell. I never reset bios on this one, sorry.
and after 4 years ago I am here to tell you that I instal windows 7 on this pc and I want to sell it lol how much I can get for it ?
hi
thanks alot for your help
but i just want to know where the wireless card is?
i want do repair.
Question, can it be put back together?
+Pietro Aretino oh yes, it can. But this video was made only one way.
Yes, and i recommend you mark the plugs with a color code or mark to make it easy to find the correct spot
thanks very much
It depend on what is wrong with it. :)
thanks... thanks.... thanks
Hello,
at 5.09
How to fix it???
So far I know it is a celeron
EeePeeCee
Yep
You are welcome!
You are welcome!