A QUICK Guide: LukeFZ's FSR3 Frame Gen Mod 0.10.x - Installation, Configuration and Troubleshooting

VERY IMPORTANT - TURN ON SUBTITLES for mistakes corrections please. :) Also, read the description for more tips. This guide works for both GOG and Steam versions of the game.
Don’t use the mod in multiplayer games, or YOU RISK A BAN. :(
NOTICE: another settings, that didn’t make it to the video:
"fake_nvidia_gpu" - this setting lets you put a game into thinking that you use a Nvidia GPU. Helpful with compatibility problems. Possible values: "true" or "false"
(since 0.10.2) „fake_nvapi_results” - this setting lets you put a game into thinking that you use a 40-series RTX GPU specifically. Helpful with compatibility problems. Possible values: "true" or "false"
There is also one very handy way of fixing things: if a previous version of the mod works for you, roll back to it and wait a bit for an update/fix.
LukeFZ's discord server and mods:
/ lukefz
Nukem's DLSSG-To-FSR3:
www.nexusmods.com/site/mods/738
Artur's DLSS Enabler:
www.nexusmods.com/site/mods/757
GAME COMPATIBILITY LIST - such list is made by LukeFZ and users of his Discord. I won't steal their work and info from them and can provide only a basic stuff for now unfortunately. The mod is known to work with:
Game Title - FSR Upscaler Version to choose | fake_nvidia_gpu | mode | In-game upscaler and FG | Notes
Alan Wake 2 - 2.2 | default | true | DLSS & FG ON | Disable Epic Games Store overlay
Cyberpunk 2077 - 2.2 | replace_dlss_fg | false | Anything & FG ON
Spider-Man Remastered & Miles Morales - 2.1 | replace_dlss_fg | false | FSR & FG ON
Dead Space - 2.1 | default | false | FSR & FG ON
Dying Light 2 - 2.0 | default | true | FSR & FG ON | Use nvngx, enable signature override | Possible UI glitches
The Witcher 3 - 2.1 | replace_dlss_fg | false | Anything & FG ON
TIMESTAMPS:
0:00 Title
0:05 Installing the mod for a game without other mods
2:05 Installing the mod for Cyberpunk 2077 with Cyber Engine Tweaks
2:23 Installing the mod for different games with other mods
2:36 The mod configuration (fsr2fsr3.config.toml file)
2:45 Running the game to get fsr2fsr3.config.toml file
3:02 Check if you can turn frame generation ON first
4:00 Editing fsr2fsr3.config.toml file and the mod's settings
4:32 QUITE IMPORTANT
4:36 Getting back to the mod settings
5:49 Setting the mod for Cyberpunk 2077
6:12 Basic Troubleshooting
KNOWN BUGS IN THE VIDEO:
Wrong info - very important:
"use_builtin_upscaling" - adds FSR3 Frame Generation only to a game's DLSS or XeSS upscalers. Lets you use FSR 3 FG with those upscalers even in games WITHOUT any frame generation.
A missing part:
"fake_nvidia_gpu" setting guide in 4 min 20 sec; check NOTICE in this description
Type mistakes:
"...folder..." in 1 min 30 sec
"...satisfying results." in 4 min 34 sec
"...each preset scales accordingly." in 4 min 58 sec
"...an official game compatibility list..." in 6 min 26 sec
"...and DLSS upscaling at least." in 6 min 26 sec
"... that remove them". in 6 min 44 sec
"...unfortunately, there may be bugs as well." in 6 min 44 sec

[@scz_g]

The guide has a few mistakes due to a rushed publication - wanted to do this today, as promised. Couldn't do that tomorrow or after tomorrow - lack of time. :(
Fixing all mistakes, please turn on subtitles. Thank you for your understanding and patience!

[@osmanyavuz2529]

After defining and saving the replace_dlss_fg setting in the mod section in fsr2fsr3.config, the game does not start and gives an error. How can I fix this? Even though I enabled_builtin and Enable_game as shown in the video, the game does not work.
However, when I use it in default mode, the game opens.

[@MOTIVATED___]

You're good bro, you earned a new sub 🤝

[@scz_g]

Thanks and welcome

[@MizuhoFTW]

Thank you for the guide, man!

[@raycistashell]

yo i have the same issue as well, fsr had alot of ghosting, xess is a bit less but still visible. Change it to dlss and its all good

[@scz_g]

It's unfortunately normal for some games like Cyberpunk 2077.
To reduce ghosting a bit you should aim for a high fps (~150) with frame gen. I'm currently looking into other ways to help with the issue.

[@scz_g]

Actually DLSS have ghosting too with FSR3 frame gen on Nvidia cards, but yeah, it's greatly reduced

[@MizuhoFTW]

@@scz_g I see, thanks man :)

[@armr1755]

Thank you man!!!!

[@shifoisunavailable]

you're amazing bro, thankss

[@osmanyavuz2529]

EnableSignatureOverride
DisableSignatureOverride
Do we need to copy these files to the main directory of the game?

[@vehanvfx1188]

Thanks mate!

[@osmanyavuz2529]

Also, the "winnm.dll" file is included in the red4ext mod to mod the game.
There is a winnm.dll file in the downloaded files. Will changing it prevent us from using the mods?

[@scz_g]

Hey! I read all your questions, I believe you're asking about Cyberpunk and LukeFZ's mod:
Personally, I'm still using 0.10.2 version of LukeFZ's mod for Cyberpunk. It works 100% with the game's 2.12 patch, doesn't need the "SigantureOverride" files, works with red4EXT (you just put the mod files in the /bin/x64 folder).
Didn't test newer versions of LukeFZ's mod with the game

[@osmanyavuz2529]

@@scz_g After defining and saving the replace_dlss_fg setting in the mod section in fsr2fsr3.config, the game does not start and gives an error. How can I fix this? Even though I enabled_builtin and Enable_game as shown in the video, the game does not work.
However, when I use it in default mode, the game opens.

[@scz_g]

@@osmanyavuz2529 If it still doesn't work, your problem seems to be pretty specific and may have a very specific reason - it should work in other modes than default for sure.
You probably should ask LukeFZ himself - I'm sure he will help you if you provide him your hardware info and logs from the game

[@osmanyavuz2529]

@@scz_g Where can I reach Luke? I couldn't see the Discord address

[@scz_g]

Luke's discord is accessible through his Patreon - then you can paste your logs from the game/mod, Luke will look into it and try to find a solution

[@JokenJoestar]

Thanks man

[@malakasgiftulaspornometana4266]

Hey, ive tried this mod and Nukem's but both cause memory leaks whenever i enable the Frame generation. The game ends up consuming 30gb of ram and then crashes

[@scz_g]

What is your Cyberpunk's game version and GPU? Yeah, it's known that patch 2.0 introduced a bug that causes stutters when you play for a longer time (>2h) and the game may even crash. So with frame gen, the issue could get worse
You can try to install "Cyberpunk Ultra PlusBetter Path Tracing and Stutter Hotfix", it's on Nexus Mods. Pick the mod's edition (raster/rt or pt), there are instructions on the mod page and a readme file after downloading.
It helped me with stutters and eliminated most crashes too

[@malakasgiftulaspornometana4266]

@@scz_g 2.1 with RTX 2080ti, the leak starts immediatly when i turn frame gen on and the game crashes. Using DLSS Enabler Allowed me to fix this.

[@scz_g]

@@malakasgiftulaspornometana4266 Nice! Nukem's mod/DLSS Enabler are the way to go for RTX users

[@juninhoplayyy]

thank you so much

[@user-wu9yp6is1b]

I did everything in this video for install FSR 3 to cp2077 but when I tried to launch game it said failed to load ngx core library.

[@scz_g]

If you're using Luke's mod, try pasting the additional nvngx.dll file into your game folder, next to the game .exe and mod file.
Did you try other FSR 3 mods before? Do you have any other mods installed? The NGX Core error happens for the 0.10.x mod's version?
That's unusual, what is your GPU?

[@4x4tori]

Ty man sm easier with cet, was fuking around cause the winmdll keep getting me trouble

[@kartal2339]

How can i install it for msfs 2020?

[@BudgieandAviaryBirds]

I can never get the frame gen to work in cyberpunk the mod loads fine but it just doesnt do anything. 7800 XT btw.

[@scz_g]

Hmmm, what's your game version?

[@Gravekeeperr]

Hi bro can i use this mod in Enshrouded

[@scz_g]

Enshrouded is a DirectX11 game, so no. :( You need a DirectX 12 game with upscaling at least to try

[@Gravekeeperr]

@@scz_g 😿😿😿😿

[@Gravekeeperr]

Ok thank u man@@scz_g

[@deepadeepa4279]

Well sorry to ask can you share the file cause you know i know i am sorry i am out of options

[@scz_g]

Hey man, I won't do that to LukeFZ, talked to that man, had my input into motivating him into bringing 0.10 fixes and new modes
Can't share it unfortunately:(

[@deepadeepa4279]

@@scz_g so a lot happened in the back it seems anyway I understand and thanks for replying

[@rrey1698]

Whoops, for my RX 580 in cyberpunk 2077 with replace_dlss_fg mode, make input delay high and like ghosting or something... When object are moving
Works awesome with default mode
And settings Fsr 2.1 enabled Quality + DLSS Frame Generation enabled

[@scz_g]

If you're using the "default" mode with a native FSR 2.1 in Cyberpunk, you won't get generated frames despite having higher fps; frames are doubled in that case, not generated:(
You need to use DLSS upscaling in the "default" mode (FSR3 upscaler replaces DLSS) but image quality is much worse.
Hmm, you shouldn't get high input lag with replace_dlss_fg but some ghosting is inevitable with high speeds

[@rrey1698]

@@scz_g ummm i do switch from fsr 2.1 to dlss, with the mod config "default" mode... But not sure why the game doesn't look change so i don't know if it's works or not.
And for "replace_dlss_fg" yes i do get significant input lage with that
I use wired mouse and it's delay when playing cyberpunk, and also same with controller, its's delay

[@scz_g]

@@rrey1698 You should see a difference in the rain
If so, check for "Shimmering Fixes" video:/
BTW. It really shouldn't be like that with the high input lag. Do you have any additional overlays enabled? What's you CPU?

[@rrey1698]

@@scz_g no additional overlay i mean i always disabling them before run the game 😁,
And for my cpu is i5 8500

[@gambaownsus]

i'm on 2.12 and it doesnt work?

[@scz_g]

try the mod's version 0.10.2 - I'm using it right now and it works

[@kartal2339]

I need a tutorial for msfs 2020

[@scz_g]

Hi! I don't own this game, so can't help. But I believe there are tutorials on YT