Easiest Way to Remove Motorcycle Grips Without Destroying Them

[@MaryK4242]

Just what I was needing to know. I love TH-cam. Thanks for sharing this. I will try this tonight!

[@donh7177]

This worked well for me. Thanks.

[@evanwest1929]

Pour rubbing alcohol down the screwdriver and work it around the inside. Should help it slide off, and will evaporate away. Never use oils.

[@Chris-gl3xb]

Not all heroes wear capes

[@AvaEdge_]

It work 100% of the time 60% of the time

[@theeddies]

Pretty much😁

[@dlpz2621]

This works good

[@theeddies]

Glad it worked for you.

[@kevinhenriksen4390]

What about on the gas side?

[@theeddies]

It will work the same, if it is not glued, but you have to take the throttle off. Note it does not work in all cases. Thanks for watching!

[@kevinhenriksen4390]

the_eddies thanks for helping, im planning to change the brake lever becouse it broke😑

[@theeddies]

@@kevinhenriksen4390 The throttle grip stays attached to the throttle tube which should slip right off. If all you are doing is replacing the lever you won't have to remove the rubber grip from the tube.

[@kevinhenriksen4390]

the_eddies thanks for all the help

[@periyadhanasekarkavitha2813]

👌👌👌👌👌

[@reviewmirror591]

I'm sorry, but everyone know about the airgun, I'm looking for a way to remove without. Most people don't have airgun at home.

[@jamesdozier1516]

same technique just use brake cleaner or contact cleaner be careful when spraying it in as it will erode paint.

[@Nuvinci88]

hair spray