Mercedes Benz A250 2013-2018 Rear Brake Pad Replacement *ELECTRIC PARK BRAKE* No computer needed
ฝัง
- เผยแพร่เมื่อ 21 เม.ย. 2020
- Hi guys in this video i demonstrate how to replace your rear brake pads which has EPB ( electric park brake)
Simple step by step DIY guide, no scanner or computer software needed.
Hope this helps
Thanks for watching - ยานยนต์และพาหนะ
Very informative video, thank you
thank you
Wow mercedes did something good about resetting that shit unlike tiguan
Do you have to make that procedure for replacing the front pads and discs? Releasing the handbrake, and also the procedure in the car’s computer
no, this process is just for the rear
I don't understand why you unscrewed the brake pad holder but then didn't clean it...
Hi. Nice video. I got a question. Do you need to take off the break fluid reservoir cap before moving to the Break service mode and push pistons?
Hi thank you, Yes you need to remove cap before pushing pistons back to check fluid as fluid will rise
A220D uses an 20mm E-torx socket , 17mm socket for the wheels and 13mm socket/spanner with grips
🙂
The piston came all the way out of the caliper, what do I do now, is there a way to put it back or is the caliper done for
And the phone and ok button isn’t bringing up anything on the screen
@@kodybehler192 - disengage handbrake , turn key once , press and hold the phone button , while holding press and hold the ok button also then it should appear
I will try tomorrow
why merc fit these stupid star bolts
@Nikos Katsikanis tell me about it 😪
theyre alot easiers to remove that rusted and rounded off normal bolts
Cowboy job, look how you have the caliper hanging. At least zip tie it to the shock or make sure it’s secure 😂