Steer Smarts Products Review - Jeep Wrangler
ฝัง
- เผยแพร่เมื่อ 18 เม.ย. 2020
- Quick rundown of the Steer Smarts components that I’ve run on my Jeep JK and my thoughts about each part. Links below for all the components discussed in this video.
- STEER SMARTS YETI EXTREME TIE ROD ASSEMBLY - www.northridge4x4.com/part/ti...
-STEER SMARTS YETI XD TOP MOUNT DRAGLINK - www.northridge4x4.com/part/dr...
- STEER SMARTS YETI XD ADJUSTABLE TRACK BAR - www.northridge4x4.com/part/tr...
- STEER SMARTS YETI XD FRONT SWAY BAR END LINK KIT - www.northridge4x4.com/part/sw...
- STEER SMARTS YETI XD DRAGLINK AND TIE ROD CAP-CAPS - www.northridge4x4.com/part/jo...
- STEER SMARTS YETI XD FLEX DAMPER BRACKET - www.northridge4x4.com/part/st...
- STEER SMARTS YETI XD TRACKBAR REINFORCEMENT BRACKET - www.northridge4x4.com/part/tr... - ยานยนต์และพาหนะ
I have this on my gladiator. I love it
Drag link and track bar should they run both as flat as possible
Can you replace the joints on the trackbar? I seem to be going back and fourth between STEER SMARTS and Metalcloak for trackbars since I'm going to be replacing both.
Yes, you can replace the track bar joints/bushings. They offer two different bushings types for the track bar. I'm running the pro series bushings in mine and highly recommend those.
This was really helpful, thank you for the video. How long did it take you to install the draglink on your JK? Thanks
Jason Rae Installation didn’t take very long. It’s helpful to have a pickle fork around for removing the drag link end at the pitman arm. Between assembling the Steersmarts draglink, removing the stock draglink, taking measurements and bolting the Steersmarts draglink in place it took me about 35 minutes to do the install.
ELEVENS DIRT LIFE Thank you! I was thinking it would take me hours. Good to know. I am super new at this so trying to get as much info as possible. Thanks!
Hey that fox stabilizer, any issues with that fitting up with steer smarts or did everything worked well together?
I didn’t have any issues using the Fox ATS Stabilizer with the Steer Smarts steering linkage. They make a bolt you can buy that’s specific to the ATS and SS’s clamp.
Do you have a build sheet for this Jeep? Very interested in that coilover kit you were running. Thanks!
Most everything on that build is on my REVKIT build page - RAGNAROK_JKU.
Here's the link: revkit.com/ragnarok-jku
What size lift are you running?
On that jeep I was running Coilovers so I set my ride height. I was probably in the 4.5”-5” range
@@ELEVENSDIRTLIFE just bought the 2 brackets you mentioned. My Jeep is getting really bad speed wobbles. Even with the yeti tie rod, track bar and fox single stabilizer. Hopefully they go away…
@@BeastieBoiess26 that’s a bummer. It can be a process tracking down wobble.
Tires could be out of balance or worn out funky, ball joints could be bad, control arm joints could be worn out etc. it’s along process sometimes
How much is the total cost for the setup
For all the Steersmarts components (Tie Rod, Drag Link, Track Bar, Sway Bar Links, Track Bar Reinforcement Bracket and Damper Bracket) you are looking at a little over $1,500
@@ELEVENSDIRTLIFE Thanks