3DSets Rancher - Extreme Pack, Winch and Soft top Upgrades

Upgrading our 3DSets 3D Printable Rancher (Jeep) with a new Soft Top roof with a hyper-realistic skin and the EXTREME pack for off-roading. The pack comes with a winch, new higher profile bumpers, fenders with more clearance, rocker guards, tow hooks, a few options for bush bars, new side doors and options for much more depending on how far you want to go with your upgrades. We even installed a new hood with a scoop! This video covers a complete installation with wiring and we were even able to drive the winch off the receiver power (still unsure how good of an idea that is).
Find the Rancher EXTREME upgrade kit here: 3dsets.com/product/soft-top-e...
Interested in getting started with your own Rancher build? We have build kits available to get you started here: rcprinter.com/products/3d-set...
Get the files to print your own Rancher here: 3dsets.com/product-category/3...
Music from Uppbeat: uppbeat.io/t/bosnow/street-kn...
License code: DZGKODAMQJNKQLAV

[@AlejandroAlcantara]

Nice! I’m printing tone as we speak! Can’t wait to assemble the rancher

[@lilwheatos]

He has good timing for this video. I am in the process of printing the Model 6 Rancher also.

[@TTMR1986]

Same, on the fenders right now, have his hardware kit enroute as well

[@rarefind3dprinting281]

Nice work! The top looks legit soft.

[@michelrichard6231]

bonjour ces une superbe voiture RC que vous avez fait cool

[@guenterhele5311]

Great Video, Thinking of getting the Rancher when the new belt tranny is available for it.

[@rcprinter]

Its worth it! I have the belt tranny in mine as an upgrade from the bamboo files.

[@CarlosDarioCaruso]

Congratulations for the proudcts, they are very good! I am trying to install secondary esc. It has two bipolar cables (negative and positive) one is connected to the motor (the central one) the other where is it connected? Because it also has the triple that goes to the receiver with the channel that I am going to use, I thought that it was fed there, but it does not work. Could you tell me exactly how to connect each one? The other bipolar also goes to the receiver? Thank you!!

[@rcprinter]

I connected one of the dual cables from the second ESC to the motor and the other to the last channel in my receiver in CH7 for power. Yes the triple goes to the receiver in the channel you want to use and I put the second dual going to the receiver for power only. If you can't (or don't want to) get power off your receiver to power the ESC you can wire it to the battery instead with the first ESC which many people do but I like my set-up better.

[@speedyMaldo]

Did you spraypaint your seats? Or did you print them in brown? I really like the look of them.

[@rcprinter]

Hey I painted them. IIRC I painted them light brown and let it dry, then I painted it dark brown and quickly dabbed them with a crumpled plastic bag to remove a lot of the dark color and get a leather-ish look.... I think :)

[@user-nn4if5bt1u]

Where can i source the motor and esc for the winch ?

[@rcprinter]

I got mine from aliexpress

[@Evilslayer73]

Hi which bits size you used with the screw kit that you sale online? do you have any link?

[@rcprinter]

These are the most common sizes I use: rcprinter.com/products/hex-screwdrivers-metric If you want tips for your screwdriver check amazon.

[@lukegames214]

what 3d printer do you use to make these

[@rcprinter]

Mostly I use Prusa i3 MK3s but I also use Ender 3s.

[@dextersxxxxlab]

love the car, love the video but please stop using the same sound sample for 20 minutes😟

[@rcprinter]

Point taken.