Looks great man. Yeah new wheels would be cool and when needed with spacers. In my opinion, it would be cool to paint those plastic parts in body color. And I'm also from Belgium 😃
The 402 mod!! I did the same thing on my c5 allroad 2.7t(same engine as a b5 s4!) out here in the states. As im sure you already know, the lowest setting will ride a bit bumpier, so when friends/family get in the car i usually bump it up to the 2nd level ride height. Enjoy the car!
Love the 4F. Owned a A6 for 6 years on KW suspension. If I knew how easy it was to lower I would have bought one with stock air. It was indeed easy to lower this model with VCDS. Have Fun with this car. Groeten uit Oost Vlaanderen!👍💪
That is wicked, my previous neighbour had a 2000 Merc S500 which would sit itself on the ground every time it was parked. Love the factory air suspension in luxury euro cars
Great work. With vcds you can activate parking sensors visual on the mmi. Needle sweap, high beam auto it changes back to low beam when cars come, and digital speedo and turbo boost visual in the cluster.
With VCDS you can enable things like Fog lights as cornering lights, control windows with remote, oil temp in MMI, needle sweep, coming home/leaving home lights.
Thank you for the kind words. I would like to point out that there are some functions that the factory scan tool does that VCDS can not perform. In a nutshell, the factory scan tools at VW, Audi, Seat and Skoda dealers call home to special servers to get data that is used for things like firmware updates, or security type functions (key matching for example). As you might guess, Ross-Tech customers will not have access to said servers, thus not be able to perform those type functions. Regards.
17:08 i agree, BUT since anyone can bag their car at this point you can get the best of both worlds easily. want performance? pull her up? want a clean, lowered car? down she goes
Love your new car! We had the same, you guesed it, in germany. It was a 3.0 TFSI though, but it was lovely to drive it on the Autobahn, especially goingt to Austria for skiing. You really have to watch out for the air compressor, we had the same issues and it hat to be replaced, eventually my dad sold it.
Hey Memphis, i really enjoy your videos, every single one of them! You and your videos mide be the reason why i think about getting a Golf 1 again or VW T3 :) the Audi is also nice and in my oppionen a perfect choice for your needs ! Keep going, great job till now ;)
New subscriber here.. sorry, didn’t know your channel existed. Glad I found it, albeit by accident but the content of the videos is great especially when you worked on the Audi 100. Great to see your new workshop is almost complete too.. it’s looking fab 👍
I always preferred the stance of the S6 to that of the Allroad. Your computer wizardry has improved the look no end. Great job Memphis. Am I the only one who likes the original alloys? 👍
Hele mooie wagen 😃 ... wat koste de inschrijving taxs als ik mag vragen? Ben ook aan het overwegen om deze aan te schaffen 😃 maar ben benieuwd wat het me zou kosten betreft taxsen..
to be honest. If i just looked at that car, I wouldn't have thought it was a high mileage :/ But that just means the car was taken after up until the end by the old owner/your dad :) It might be some expensive work that has to be done, but to be fair if the old parts lasted that long, the new parts should last just a long :O so it's worth doing in my opinion, keep going :)
Nice video. But be careful, it is bad for your suspension bags to inflate of deflate to the maximum. It is also bad for the suspension arms, especially silenblocs. But I have to agree it looks nice. I do have lowered all my cars but it always cost me a lot of money to replace the broken parts while lowered
That reminds me of my w124 surprising me 2 years ago. My car was parked in front of my house and i saw it sitting low as a lizard. Left spring perch was badly rusted and ripped off. That's why it was soo low. I welded it back to its place and painted it afterwards.
Probeer is iets vaker te uploaden. Je doet Geniaal werk, alleen upload wat vaker omdat ik niet kan wachten op de volgende aflevering. Ik raad je aan om die A6 Allroad helemaal zwart te maken. Dat ziet er gruwelijk uit, heb zelf er meerdere keren 1 gezien. Ik raad je dan wel aan, om getinte ramen te hebben ziet er heel dik uit. Goed werk!
beste blij te zien dat je vcds hebt leren kennen. ik heb zelf een audi tt en altijd al fan geweest van vw en audi. ik wil deze zomer naar de nurenbergring dus als julie dit jaar terug gaan. wil ik zeker mee.
Interesting video, Memphis. Speaking as an old fart, I prefer stock height. Considering the state of the roads here, stock height and smaller wheels/taller tires would be an absolute must. Lowered, it would never make it into and out of my driveway. A few years back the expressway between where I live and where my mother lives suffered pavement failure. The carriageway had been resurfaced and the new surface did not bond properly. For a week every time I drove through the area there would be 5 or 6 cars on the shoulder awaiting recovery with at least two flat tires. Talking to one of the recovery drives I found out that many not only ruined the two tires but had also bent or broken the alloy wheels.
Verschil in rijhoogte kan ook komen doordat in het verleden bij bandenwissels of herstellingen de wagen niet in service-hoogte(of gewoon hoogste stand) zetten bij de herstelling. Propere wagen voor de aantal km👌. Blijf zo verder doen!
I own a mercedes b200 w245. 320k km. All major suspension components have been replaced, and pretty much the whole engine has been redone. Most of it was done out of preventative maintenance. I guess this Audi you got hasn't seen much more than a frequent oil change. It makes a difference
I would do so much, wrap it nardo grey, update head lights and tail lights, grill mirror caps,tune,tires,brakes,exhaust,20% tint all around,and a flat bottom steering wheel no cap
Great video. When you washed the fender liners I was so satisfied lol. I’ll keep supporting so you can keep paying the road tax on this beast. Is it an idea to wrap the plastic trim in the body color of the car?
HEEL KNAP GEDAAN! DANKU VOOR ALLE INFO! ik heb mij een gekocht met 240k en wil hier ook alles zelf aan doen! je bent men voorbeeld, goed werk doe zo voort, heeft u nog meer filmpjes van deze?GRTJ Killian uit Geraardsbergen👍🏼👍🏼👍🏼👍🏼💪🏼💪🏼💪🏼💪🏼
Hey I couldn’t help but notice your rear brake line have cracks in the rubber layer after the crimped fitting going to the caliper ;) cheers and great videos my friend
I Keep coming back to this video😂Thanks a lot was able to calibrate my car was 1 cm of and that seemd to cause my yellow light to flash and i got a Code for mecanical error on sensor. But seems to be fine now 😎
WOW incredible, whe i started to follow you i was interested in your restoration process of e28 BMW because i have the same one, but surprise!!! i have the same A6 allroad too! So i´m going to follow you twice!! Regrets from Spain! PD: let me only one advise, show the vcds codes in english to understand better!! thanks!!
only the pre 2009 models had it, afterwards they ditched that system and used the ABS module to provide the tyre pressure only, no more tyre temperature. The previous system was really nice and offered better info but i guess cost cutting was much more important. Only the RS6 C6 kept the old system, had both the RS6 and the Allroad and i liked the older tyre pressure system better.
nice... but just a word of advice... whenever you work under the car , after you lift it ... put something under it, just in case the jack fails...couple of wood blocks... you never know... shit happens.
Hey Memphis. Your video brought me to the idea that this testing device would be very helpful when I´ll be buying a car. I´m looking for a 2003 Allroad C5, the previous version. Do you think I´ll be able to use it? Thanks, love what you do
Really nice vid, how about another one on the Audi? its now Feb 2021 and I just checked your channel and this is the last Audi vid!...I have exactly the same car :)
Cool stuff mate , I think all roads go lower than my d4 a8 this thing will only go down by 17mm with vcds. I ran lowering links on my previous d3 a8 so I’m gonna get some for this one too.
hey man, love your content, vooral met die vw jetta. als je wat content nodig hebt heb ik hier een 1987 vw scirocco mk1 zitten. start niet. (niet te koop)
Good job! U need to change the wheels, Tomason TN1 19' and paint the single frame in piano black, whitout audi logo.... i belive u search on aliexpres, kit for A6 RS...maibe, or parts....and black window. Sorry for english, but its not my first language. 👍
This is a big step for you, congrats! But do you know that start and a few minutes later turn off is bad for the engine? Or do you cut those minutes off the video?
Hey, voor de rest tevreden van de wagen? Zijn voor het gezin ook op zoek naar een allroad (lichte vracht voor de taksen) Waar moeten we op letten bij aankoop en qua kmstand? M
HI Mephis! Very nice and interesting video! I have a question about it. I have an Audi A6 c6 2005 3.0 with air suspension from factory, and i wanted to ask you if i can proced same like you to lower the car! Or a contact to ask you few questions, because I don’t want to something wrong! Cheers!🤜🤛
Anyone interested in doing this, just google Audi 402 mod. I've used a £10 cable from eBay for years and never had any issues. Always hook up the car to a battery charger whilst doing ANYTHING ecu related like this, make sure the laptop is charged/plugged in and usb cable is connected securely. You will never have any issues either.
hey memphis, i'm curious about how you did the deflating at 16:55 , I've got the exact same car :D so mabye i can learn a few things from you personally ive changed tires to 255,30,20 took of the DPF took of the rear mufflers lowerd it by a few cm
@@memphis5220 Just the comment I was looking for! Same situation, same car and was also scratching my head searching for the deflation option in VCDS. Well, since it's in the basic adaptation menu I'm going to have to check there now :) Thanks! BTW, love you're content and humor, just finished watching your new video when "The allroad went into stance mode again...". Made me laugh hard a few times hahaha "When you get a GF, she loves you for you and your big di...." 😂😂😂
Hallo Memphis. Naast je perfecte (bijna te makkelijke) uitleg over een A6 waarbij mijn luchtvering wegzakt. Alle luchtbalgen zijn dicht en voor de zekerheid rechtsvoor vervangen maar de auto zakt na een uurtje al weer aan de voorkant (voornamelijk rechts voor) na. Is het mogelijk dat jij mijn A6 c6 ook eens uitleest? Ik heb een redelijke technische achtergrond dus als ik weet waar het probleem ligt, zou ik het zelf wel kunnen verhelpen. Succes! Gr. Frans
I liked the low level reached by the obd, but to lower it more by the air, it looks ugly and with no reflect on the performance cuz this performance you seek is not reachable in daily drive and I don't think you would race using such tall and heavy car
I am curious can you use the vcds to lower headlights, my mercedes has automatic headlight positioning and its always looking too much down, Great vid by the way
Great work Memphis you've got yourself a really good car there. These videos really help with the lockdown thank you from England!
Looks great man. Yeah new wheels would be cool and when needed with spacers. In my opinion, it would be cool to paint those plastic parts in body color. And I'm also from Belgium 😃
The 402 mod!! I did the same thing on my c5 allroad 2.7t(same engine as a b5 s4!) out here in the states. As im sure you already know, the lowest setting will ride a bit bumpier, so when friends/family get in the car i usually bump it up to the 2nd level ride height.
Enjoy the car!
Love the 4F. Owned a A6 for 6 years on KW suspension. If I knew how easy it was to lower I would have bought one with stock air. It was indeed easy to lower this model with VCDS. Have Fun with this car. Groeten uit Oost Vlaanderen!👍💪
That is wicked, my previous neighbour had a 2000 Merc S500 which would sit itself on the ground every time it was parked. Love the factory air suspension in luxury euro cars
So... You've got an Allroad, the raised version of A6 and then lowered it... okaaaay....... ;)
you can't lower the a6 with air from factory tho...
It only has springs and shocks
That's how you do it! Slammed is the way to go!
*blonde bearded guy meme* yes
Great work. With vcds you can activate parking sensors visual on the mmi. Needle sweap, high beam auto it changes back to low beam when cars come, and digital speedo and turbo boost visual in the cluster.
What's the coding for the auto high beam to low beam, does it include the 4F?
With VCDS you can enable things like Fog lights as cornering lights, control windows with remote, oil temp in MMI, needle sweep, coming home/leaving home lights.
On the prefacelift A6 C6 can't do Needle Sweep, or oil temp, only on the facelift models. Cornering can't be also done,not even on the facelift C6.
Thank you for the kind words. I would like to point out that there are some functions that the factory scan tool does that VCDS can not perform. In a nutshell, the factory scan tools at VW, Audi, Seat and Skoda dealers call home to special servers to get data that is used for things like firmware updates, or security type functions (key matching for example). As you might guess, Ross-Tech customers will not have access to said servers, thus not be able to perform those type functions. Regards.
RossTechVCDS thank you for the clarification!
17:08 i agree, BUT since anyone can bag their car at this point you can get the best of both worlds easily. want performance? pull her up? want a clean, lowered car? down she goes
Love your new car! We had the same, you guesed it, in germany. It was a 3.0 TFSI though, but it was lovely to drive it on the Autobahn, especially goingt to Austria for skiing. You really have to watch out for the air compressor, we had the same issues and it hat to be replaced, eventually my dad sold it.
Looks really good I would recommend a straight pipe😂 these engines sound amazing
They really do!
I want to streight pipe my Audi Q7 3.0 V6 TDI but it's pretty costly 😂
I have an 2009 A6 4F Avant 2,7 TDI quattro since 5 years. Love my car. I like your Videos very much! Keep up the good work!
Hey Memphis, i really enjoy your videos, every single one of them!
You and your videos mide be the reason why i think about getting a Golf 1 again or VW T3 :)
the Audi is also nice and in my oppionen a perfect choice for your needs !
Keep going, great job till now ;)
New subscriber here.. sorry, didn’t know your channel existed. Glad I found it, albeit by accident but the content of the videos is great especially when you worked on the Audi 100. Great to see your new workshop is almost complete too.. it’s looking fab 👍
I always preferred the stance of the S6 to that of the Allroad. Your computer wizardry has improved the look no end. Great job Memphis. Am I the only one who likes the original alloys? 👍
Hele mooie wagen 😃 ... wat koste de inschrijving taxs als ik mag vragen? Ben ook aan het overwegen om deze aan te schaffen 😃 maar ben benieuwd wat het me zou kosten betreft taxsen..
to be honest. If i just looked at that car, I wouldn't have thought it was a high mileage :/ But that just means the car was taken after up until the end by the old owner/your dad :) It might be some expensive work that has to be done, but to be fair if the old parts lasted that long, the new parts should last just a long :O so it's worth doing in my opinion, keep going :)
Nice video.
But be careful, it is bad for your suspension bags to inflate of deflate to the maximum. It is also bad for the suspension arms, especially silenblocs. But I have to agree it looks nice. I do have lowered all my cars but it always cost me a lot of money to replace the broken parts while lowered
Being me- i'd have tried to patch it with a motorcycle patch xD
Good job ! A great car. I have the same model, but with a petrol operating engine instead of diesel.
Good choice.
new vid made my day better, keep up the good work ;)
That reminds me of my w124 surprising me 2 years ago. My car was parked in front of my house and i saw it sitting low as a lizard. Left spring perch was badly rusted and ripped off. That's why it was soo low. I welded it back to its place and painted it afterwards.
Hello, I'm from Brazil Watch your videos I think very cool. It's a lot of fun too. That's good work.
Always fun to see a new video from your channel :)
Probeer is iets vaker te uploaden. Je doet Geniaal werk, alleen upload wat vaker omdat ik niet kan wachten op de volgende aflevering. Ik raad je aan om die A6 Allroad helemaal zwart te maken. Dat ziet er gruwelijk uit, heb zelf er meerdere keren 1 gezien. Ik raad je dan wel aan, om getinte ramen te hebben ziet er heel dik uit. Goed werk!
beste blij te zien dat je vcds hebt leren kennen. ik heb zelf een audi tt en altijd al fan geweest van vw en audi. ik wil deze zomer naar de nurenbergring dus als julie dit jaar terug gaan. wil ik zeker mee.
Hello, first of all, that Audi looks great, I want to change from 245/40/R18 to 225/40/R20. rub against the wheel arch. thank you
Dees was eig echt interessanter dan ik had verwacht haha! Kwaliteit zoals usual
Interesting video, Memphis. Speaking as an old fart, I prefer stock height. Considering the state of the roads here, stock height and smaller wheels/taller tires would be an absolute must. Lowered, it would never make it into and out of my driveway. A few years back the expressway between where I live and where my mother lives suffered pavement failure. The carriageway had been resurfaced and the new surface did not bond properly. For a week every time I drove through the area there would be 5 or 6 cars on the shoulder awaiting recovery with at least two flat tires. Talking to one of the recovery drives I found out that many not only ruined the two tires but had also bent or broken the alloy wheels.
I don't know but I think that OBDwarenhuis should offer a VCDS kit to you... Great video!
Greetings form Latvia ,just pop up in recomendations in youtube.
You need to straight pipe it ,V6 have a good sound.
Hi fellow latvian :)
V6 diesel, they don't sound great
@@DerKaktusAvant You should definitely look up BROO performance videos
@@DerKaktusAvant th-cam.com/video/b6PhnXwO19E/w-d-xo.html
The Audi 2.7/3.0 V6 TDI is quite often dubbed the 350z of the diesel world.
best video! also explains how it set up height. Thanks. we all have VCDS but cannot find codes for every system, i have no manual.
Great vid! Thanks for the tutorial, mine need doing and this has really helped. Out of interest, what size alloys are you running? Thanks again 👍🏻
Nice e28 in the background. Wish we got all the cool euro bits from the factory here in the states.
Verschil in rijhoogte kan ook komen doordat in het verleden bij bandenwissels of herstellingen de wagen niet in service-hoogte(of gewoon hoogste stand) zetten bij de herstelling. Propere wagen voor de aantal km👌. Blijf zo verder doen!
I own a mercedes b200 w245. 320k km. All major suspension components have been replaced, and pretty much the whole engine has been redone. Most of it was done out of preventative maintenance. I guess this Audi you got hasn't seen much more than a frequent oil change. It makes a difference
I would do so much, wrap it nardo grey, update head lights and tail lights, grill mirror caps,tune,tires,brakes,exhaust,20% tint all around,and a flat bottom steering wheel no cap
Great video. When you washed the fender liners I was so satisfied lol. I’ll keep supporting so you can keep paying the road tax on this beast. Is it an idea to wrap the plastic trim in the body color of the car?
Madern it is black like the car
Memphis ja maar het is kunstof.
HEEL KNAP GEDAAN! DANKU VOOR ALLE INFO! ik heb mij een gekocht met 240k en wil hier ook alles zelf aan doen! je bent men voorbeeld, goed werk doe zo voort, heeft u nog meer filmpjes van deze?GRTJ Killian uit Geraardsbergen👍🏼👍🏼👍🏼👍🏼💪🏼💪🏼💪🏼💪🏼
China vcds cables work 100% perfectly. Ive used for years on many cars with zero problems
Hey I couldn’t help but notice your rear brake line have cracks in the rubber layer after the crimped fitting going to the caliper ;) cheers and great videos my friend
Très intéressant la suspension par airbag ! Je ne connaissais pas cette technologie, merci.
Brilliant video Memphis love your channel stay safe 🇬🇧🇬🇧
Ah yes, this reminds me of lowering the rear of my BMW E39 540i wagon using INPA, which is fairly similar to VCDS, just a little less user-friendly.
Happy to see you, hop your well.
I Keep coming back to this video😂Thanks a lot was able to calibrate my car was 1 cm of and that seemd to cause my yellow light to flash and i got a Code for mecanical error on sensor. But seems to be fine now 😎
Hey Memphis, i really enjoy your videos, every single one of them!
ADVOKAT 047 thanks!
WOW incredible, whe i started to follow you i was interested in your restoration process of e28 BMW because i have the same one, but surprise!!! i have the same A6 allroad too! So i´m going to follow you twice!! Regrets from Spain!
PD: let me only one advise, show the vcds codes in english to understand better!! thanks!!
Damn nice m8. Will you straight pipe it in the future?
I enjoyed this thx. Looks like some new dampers are in order too!
My car is more recent but don't have all those options in the US like reading tire pressure or sitting low or high
only the pre 2009 models had it, afterwards they ditched that system and used the ABS module to provide the tyre pressure only, no more tyre temperature. The previous system was really nice and offered better info but i guess cost cutting was much more important. Only the RS6 C6 kept the old system, had both the RS6 and the Allroad and i liked the older tyre pressure system better.
buenos dias, me gustaria saber como llegaste a bajar al minimo la suspension, gracias por tu tiempo y tus videos
Could you use the same method to increase highest level too? If so by how much?
Не знаю почему я смотрю его не понимая, но мне чертовски это интересно!)))
Lijkt wel Citroen zoals je auto omhoog komt ! Leuke leerzame video en alles duidelijk uitgelegd ! groeten uit Breda .
Wederom weer een mooi filmpje met een nette uitleg welkom BELGIE
nice... but just a word of advice... whenever you work under the car , after you lift it ... put something under it, just in case the jack fails...couple of wood blocks... you never know... shit happens.
Great cars and so under rated. One new sub from the Uk😎👍
Hey Memphis. Your video brought me to the idea that this testing device would be very helpful when I´ll be buying a car. I´m looking for a 2003 Allroad C5, the previous version. Do you think I´ll be able to use it? Thanks, love what you do
Toffe bak hoor. 👌. Wat kost zo’n diesel nou in België? Greetz from the Netherlands 🇳🇱
Hey man! How much did you paid for the rear airbags?
Btw, you are doing a great job! Keep it up!
Greetings from Romania!
Sergiu Radulescu about 500
Really nice vid, how about another one on the Audi? its now Feb 2021 and I just checked your channel and this is the last Audi vid!...I have exactly the same car :)
Gehoorbescherming 👌🏻
Really love your channel mate ! Learned a lot !
Praat Nederland bro haha wel leuke video’s man
Hij gaat dan vlaams praten dus wij kunnen niks verstaan omdat we hele tijd aan het lachen zijn
H.043 prc dit
Socialist anti car country doesnt deserve such good videos :)
Cool stuff mate , I think all roads go lower than my d4 a8 this thing will only go down by 17mm with vcds. I ran lowering links on my previous d3 a8 so I’m gonna get some for this one too.
Hello. On what driving mode (dynamic, automatic, comfort, allroad or lift) your car was set, before you start this procedure?
Fantastic video, greetings from the U.K.
Great work bro! I enjoy watching each of your videos!
Thumps my friend, I enjoy all of your videos. I have also learned a lot, thank you. Keep on bringing the good stuff 👍 cheers
Please don't take so long to post🙌🏼
hey man, love your content, vooral met die vw jetta. als je wat content nodig hebt heb ik hier een 1987 vw scirocco mk1 zitten. start niet. (niet te koop)
why did you leave that rust there? to let it rust more? you had a perfect opportunity to fix it.
uitstekend, VCDS is mijn beste aankoop geweest
Excellent VCDS has been my best purchase
Hoi goed werk zeg ik heb een t6 nou ik ga ook vcda aanschaffen. Dank je El voor deze video. Gr 👌👍
Good job!
U need to change the wheels, Tomason TN1 19' and paint the single frame in piano black, whitout audi logo.... i belive u search on aliexpres, kit for A6 RS...maibe, or parts....and black window. Sorry for english, but its not my first language.
👍
Brilliant video, does anyone know what size tool to remove the bolt securing the airbags? Thanks Mike
Lovely episode, keep up the amazing content! 👊
Lekker man bro
Awesome video kiddo! Great job 👍🏼
This is a big step for you, congrats! But do you know that start and a few minutes later turn off is bad for the engine? Or do you cut those minutes off the video?
mooie daily en leuke content 🤙 subscribed
Great video, thanks and keep up with the good work.
Great video. Although Im not sure the lowered look suits the A6.
Hey, voor de rest tevreden van de wagen?
Zijn voor het gezin ook op zoek naar een allroad (lichte vracht voor de taksen)
Waar moeten we op letten bij aankoop en qua kmstand?
M
Je meet de rijhoogte van het midden van het wiel, niet vanaf de grond. 😂
What’s up from Texas! You should change those yellow headlights to led or atleast a white light
Clayton Grogan yes definetely
Still a nice car, this older A6!
Awesome work done, keep it up, love watching your videos :)
HI Mephis! Very nice and interesting video! I have a question about it. I have an Audi A6 c6 2005 3.0 with air suspension from factory, and i wanted to ask you if i can proced same like you to lower the car! Or a contact to ask you few questions, because I don’t want to something wrong! Cheers!🤜🤛
15:30 je weet zoveel van auto's maar leren schoenen strikken is altijd lastig :P
Wouter Breukers hahaha held
Thanks for the knowledge..
Anyone interested in doing this, just google Audi 402 mod.
I've used a £10 cable from eBay for years and never had any issues. Always hook up the car to a battery charger whilst doing ANYTHING ecu related like this, make sure the laptop is charged/plugged in and usb cable is connected securely. You will never have any issues either.
excellent video as usual. The audi is looking nice
hey memphis, i'm curious about how you did the deflating at 16:55 , I've got the exact same car :D so mabye i can learn a few things from you
personally ive changed tires to 255,30,20
took of the DPF
took of the rear mufflers
lowerd it by a few cm
St Cunt it can be done in basic settings in the adaptation menu
@@memphis5220 Just the comment I was looking for! Same situation, same car and was also scratching my head searching for the deflation option in VCDS. Well, since it's in the basic adaptation menu I'm going to have to check there now :) Thanks! BTW, love you're content and humor, just finished watching your new video when "The allroad went into stance mode again...". Made me laugh hard a few times hahaha "When you get a GF, she loves you for you and your big di...." 😂😂😂
Hallo Memphis. Naast je perfecte (bijna te makkelijke) uitleg over een A6 waarbij mijn luchtvering wegzakt. Alle luchtbalgen zijn dicht en voor de zekerheid rechtsvoor vervangen maar de auto zakt na een uurtje al weer aan de voorkant (voornamelijk rechts voor) na. Is het mogelijk dat jij mijn A6 c6 ook eens uitleest? Ik heb een redelijke technische achtergrond dus als ik weet waar het probleem ligt, zou ik het zelf wel kunnen verhelpen. Succes! Gr. Frans
Awesome bro!! You can also use some spacers.
I liked the low level reached by the obd, but to lower it more by the air,
it looks ugly and with no reflect on the performance
cuz this performance you seek is not reachable in daily drive
and I don't think you would race using such tall and heavy car
I am curious can you use the vcds to lower headlights, my mercedes has automatic headlight positioning and its always looking too much down, Great vid by the way