GM 4L60E Transmission Service
ฝัง
- เผยแพร่เมื่อ 4 ต.ค. 2024
- This can be a relatively simple job. But, it can quickly turn into a headache...if you don't know what to watch out for. Join me as I share my method for servicing the GM 4L60E automatic transmission.
GM 4L60E - Filter Seal Replacement:
Coming Soon!
GM 4L60E - How to Fill & Check Fluid Level:
Coming Soon!
Help this Channel Grow: • Help This TH-cam Chan... &list=UULFx_RrH0NPRyKoz9LwBa69hw
**Entire 4L60E Playlist**
• Automatic Transmission...
**Our Most Popular 4L60E Videos**
1-2 Shift Valve + Solenoid (Part 1): • 4L60E: 1-2 Shift Valve... &list=UULFx_RrH0NPRyKoz9LwBa69hw
2WD to 4WD Conversion: • 4L60E Output Shaft Swa... &list=UULFx_RrH0NPRyKoz9LwBa69hw
Shift Solenoid - How it Works (Part 1): • 4L60E Shift Solenoid -... &list=UULFx_RrH0NPRyKoz9LwBa69hw
RESOURCES:
1) 4L60E Tools: (Paid Links)
Door trim tool: amzn.to/3IQWKTy
Torque Wrench: amzn.to/3UGzLS1
Drain Funnel: amzn.to/3W54usW
Sweet Upgrade: amzn.to/44buncs
Extra Large Drain Funnel: amzn.to/448e7sV
Dead Blow Mallet: amzn.to/4dbOqvk
Ball Peens: 16oz: amzn.to/49PdZ2D 2oz: amzn.to/3JDPeeV
Ratchets: 3/8: amzn.to/4b9951r 1/4: amzn.to/3WcdEDO
1/4 Drive Extension: amzn.to/3U4YvSg
1/4 Drive 13mm Wobble Socket: amzn.to/3xXCi0S
Torx Bit: amzn.to/3xRFNpT
Scraper: amzn.to/4b5BjtW amzn.to/44c6uBA
Pliers: amzn.to/3UuOdMx
2) 4L60E Parts: (Paid Links)
Filter:
Shallow Pan: amzn.to/3UbP7fI
Deep Pan: amzn.to/3xQugqO
Filter Seal: amzn.to/49Wp7up
Pan Gasket (Fiber): amzn.to/3UwcbHh
Replacement Oil Pan:
Shallow: amzn.to/49KILJW
Deep: amzn.to/3W8GMfr
Pan Magnet: amzn.to/3w7xXI4
ATF: amzn.to/3UbReQK
Shifter Cable: amzn.to/3xXCTj8
Cable Retainer: amzn.to/49YSGfe
Rebuild Kit: 93-03: amzn.to/3chb3Qw 04-Up: amzn.to/2OaYJcL
3) Safety-Wear: 😷 (Paid Links)
Comfortable Safety Glasses: amzn.to/2JguhZN
Nitrile Gloves: amzn.to/2Y6XwSN
Work Shirt: amzn.to/3IQTo2T
Work Pants: Coming soon.
4) Tools: 🔧 (Paid Links)
Pocket Screwdriver: amzn.to/2OdoR44
Bench Vice: amzn.to/2LFnKbZ
230-Piece Tool Set: amzn.to/2L0AtWv
1/2 Impact Gun: amzn.to/30zUuHA
3/8 Impact Gun: amzn.to/30l5gpm
Air Compressor (60 Gallon): amzn.to/2QkisXt
1/4 Air Hose: amzn.to/2QjJQ7W
5) Shop Supplies: ✏️ (Paid Links)
Transmission Assembly Gel:
Light Tack: amzn.to/3NqXf7D
Firm Tack: amzn.to/3GKp34i
Brake Parts Cleaner: amzn.to/2HxQ1Pz
Spray Adhesive: amzn.to/3w8AKRk
DISCLOSURE: 🕵
Links provided are affiliated links with the associated websites. While there is no extra cost to the purchaser, a small portion of the sale goes to support this TH-cam channel.
Vehicle fitment
04-07 Buick Rainier, 94-96 Buick Roadmaster, 99-00 Cadillac Escalade, 02-05 Cadillac Escalade (select models), 94-96 Cadillac Fleetwood, 93-05 Chevy Astro, 02-08 Chevy Avalanche, 94-05 Chevy S-10 Blazer, 94-02 Chevy Camaro, 94-96 Chevy Caprice, 04-12 Chevy Colorado, 94-04 Chevy Corvette, 03-12 Chevy Express, 94-96 Chevy Impala SS, 94-05 Chevy S-10, Chevy Silverado 1500-2500, 93-00 Chevy C/K SUV,Truck, 03-06 Chevy SSR, Chevy Suburban, Chevy Tahoe, 03-09 Chevy TrailBlazer, 04-12 GMC Canyon, 03-09 GMC Envoy, 93-05 GMC Jimmy, 93-05 GMC Safari, 03-13 GMC Savana, GMC Sierra 1500-2500, 94-05 GMC Sonoma, GMC Yukon, GMC Yukon XL Denali, 93-96 GMC Vandura, Hummer H3, Oldsmobile Bravada, 94-02 Pontiac Firebird, 04 Pontiac GTO, etc. Chevy Silverado transmission fluid change.
Automatic transmission service (filter replacement).transmission fluid change. 4L60E fluid & filter change. 4L60E filter & gasket replacement. Chevy Camaro fluid & filter change. Chevy Corvette fluid & filter change. Chevy Silverado fluid & filter change. Chevy Suburban fluid & filter change. Chevy Tahoe fluid & filter change. GMC Sierra fluid & filter change. GMC Yukon fluid & filter change. - ยานยนต์และพาหนะ
Good no non-sense video. Thanks for uploading
I used a large cake pan, and a bucket but thats a good drain funnel...still got a Hot Oil treatment on my hare😅
Thanks best and most informative video. Moroso makes a great gasket for the pan. The rubber and metal reusable type.
Good to know! Have to look into that. Thank you for sharing.
My favorite part on my 08 1/2 ton 4x4 was dropping the front y pipe , so i cut it up welded two different y pipes together brought the cross over exhuast pipe out of the way ..much easier now , didnt seem to effect o2 sensors , i used to work in a exhuast shop
Right on!
I just changed my fluid, filter and installed a pan with a drain. Didn't have to remove the shift linkage, just cocked it down to the right then back to the left, came right out.
I just did this service on my 4L60E in my 2003 Chevy S10 and I did not have to worry about that shift cable bracket at all. I just took the nut off the shift shaft and pulled it away that way. The bracket was not in the way in any shape or form.
Before you remove the transmission from the vehicle, break open a cooler line and start the engine. It'll pump itself right out. Shut it off when it sputters. No muss, no fuss when you remove the pan.
Just pump the fluid from the dipstick tube!
I used the cheap transfer pump from HF, about $6.
I like it!
If you install a new filter seal, leave it 2mm proud so the next time, it's easy to get a screwdriver under it to pry it out.
I have a z71 my dad bent the bracket and i was able to get the pan off
Hello. Your videos have taught me so much about automatic transmission. I really appreciate you. I have a Suzuki jimmy automatic transmission that won't shift out of first gear. I changed the valve body with a used one still the same . Please what do you think would have caused it . Thanks
I'm wishing those bracket bolts were normal hex head for a side engagement with a box wrench
That would be too easy...and make too much sense...
@@SouthpawAutoworks With a welder I modified my bracket into a two piece. Bottom half unbolts quickly and gives access to the pan bolts.
Hi Robert...like your "to the point style" and articulate descriptions (new subscriber here 2004 Suburban 2500 100K miles X FBI vehicle) 4L60E...OK it shifts fine for first 30 minutes then starts hard shifting in 1/2 2/3 occasionally 3/4.
My idea is to buy all shift solenoids and have fluid change and replace them...what else should I do at the time...fluid level is perfect. Ideas Comments?
I would NOT remove the shifter cable from the shift arm; that ball socket does not last doing it that way. remove the 15mm nut and take the shifter arm off the shaft. I've had shift cables come off the ball socket after one or two of those removal/reinstalls.
There is no need to torque the pan bolts in any particular pattern. There's literally zero pressure on that pan. Just make sure the final torque spec you use is correct so you don't warp the pan.
Hi Robert I rebuilt my 94 4l60e almost a year ago on my camaro and was working great no leaks (my first transmission rebuild ever) I only had like 500 miles on it, I only use the car some weekends. Thing is a couple weeks ago I went on a 40 mile trip and the transmission cooler failed, huge leak I dont know at what point in the trip it happened but when I got home it was shifting weird and had very slow reverse, very low on fluod. I replaced the cooler and refilling I accidentally overfilled the transmission but didn't notice it. Then I went to a test drive for like 6-8 miles and the transmission was working good just a bit harsh on the 1-2 shift but felt back to normal. I noticed the fluid level and took some fluid out to get it to the correct level. Thing is now it has a leak which seems to be from the pump seal, do you guys think that the low fluid due to the cooler leak caused the torque converter to overheat and damaged the seal? I don't really know cause I need to take the converter cover out to really see what's happening but the fluid it's coming from that area for sure and I think it's the only place it can leak but I might be wrong
Can the computer cause a newly rebuilt 4160E to downshift? The old transmission did the same thing. Or, could it be wheel speed sensors...or something else?
I have a 2001 Chevy Astro AWD with the 4L60E. Are there any adjustments that can be made to the shifter cable to make sure it’s in the correct (exact) shift position? Thanks
Check out this video. Jump to 14 min into the video to see what you're looking for.
GM 4L60E - MLP Switch Replacement (Made EASY)
th-cam.com/video/P-2KWV4J3TE/w-d-xo.html
🔥🔥🔥🔥
Good to see you on here again.
Thanks for stopping by.
What filter brand do you recommend? Always oem or are there others that are good?
Won't be long now. I gotta swap in a 400th in place of my 4l60. I would just leave it because 400th is just a beast, but for now it is just going to be a back up until I can get a chance to rebuild the 4l60. Ya know I forgot to buy the steels module for the new clutches. The trans still runs and drives. Do you think reusing the steels would be a issue. Unless they are thin or scorched and warped it don't seem like it would be a big issue. Maybe just mic the and send if they are in spec.
Whats the best pan gasket to use, i put a cork gasket on my 4l60e, and it seeps and leakkes all the wau around??
I like the fiber. Pan may be warped. You can lay it upside down on a known flat surface to check it. Also good to check the bolt holes for "dome-ing". Of course, removing all gasket material from both the pan and the trans case, is a must.
@@SouthpawAutoworks Awesome Thanks!!!!!
Should I reuse my trans fluid that comes out when I change my filter or should I put fresh fluid in?
If it were me (and do what I do at your own risk), I'd be using fresh fluid.
@@SouthpawAutoworks if it calls for dex3 should I get the best brand or will any brand do?
If you have trouble finding dex-3, dex-6 is backwards compatible.
ATF: amzn.to/3UbReQK (paid link)
DISCLOSURE: 🕵
Links provided are affiliated links with the associated websites. While there is no extra cost to the purchaser, a small portion of the sale goes to support this TH-cam channel.
I pumped my pan from the dip stick tube before i took my pan off
Right on.
About to put new solenoids and a harness in mine. Does a EPC solenoid need to be programmed?
Right on.
No.
There are two different generations of EPC solenoid. The main difference lies in the electrical connector (Delphi vs Borg Warner). You may want to see what you currently have installed, before ordering a replacement.
Early EPC Solenoid (black can) (93-03): amzn.to/44lRjWL (paid link)
Late EPC Solenoid (silver can) (03-14): amzn.to/3UDItQA (paid link)
Note: The year of the VB (valve-body) is stamped right on it. It's a 2-digit code.
DISCLOSURE: 🕵
Links provided are affiliated links with the associated websites. While there is no extra cost to the purchaser, a small portion of the sale goes to support this TH-cam channel.
Thank you sir
You bet.