You make things look very easy Dan and your detailed description just simplifies things even further. I don’t own a KLX300 but I enjoyed following along regardless. Looking forward to your next instalment. Cheers.
@@nevillegriffiths8681 Good Neville have been too busy to post up progress vids. It is in getting its brake declaration at the moment and should be getting the recertification process started next week
I love my 98 300r but it’s a pain in the butt to get started! I can kick it easily but it takes sometimes 30 kicks for it to start, and once it’s hot it really doesn’t like to start
Sounds like there is an issue in the carb. Mine at most will take 5 kicks from cold if it has been sitting for a few weeks. If it's in regular use starts first kick cold or hot
Hi dan, should the acr have play on the end of the cam, bike started makeing a small wear sound after the last ride, iv taken the valve cover off to inspect the head and i noticed the acr has alot of side to side play, is this normal or should i replace the exhaust cam.cheers
I Done This Mod And It’s Made The Bike So Easy To Start Now, Thanks For Your Video 😊👍
You make things look very easy Dan and your detailed description just simplifies things even further. I don’t own a KLX300 but I enjoyed following along regardless. Looking forward to your next instalment. Cheers.
Thanks Neville👍
@@MOTODANS - how’s the progress going on this one mate?
@@nevillegriffiths8681 Good Neville have been too busy to post up progress vids. It is in getting its brake declaration at the moment and should be getting the recertification process started next week
High quality content as always Dan. Very well done, I learned a lot thanks.
Dino
Thanks Dino 👍
Big thank you 😊
brother, do you happen to know the valve on it can be ground in or just milled properly?
I love my 98 300r but it’s a pain in the butt to get started! I can kick it easily but it takes sometimes 30 kicks for it to start, and once it’s hot it really doesn’t like to start
Sounds like there is an issue in the carb. Mine at most will take 5 kicks from cold if it has been sitting for a few weeks. If it's in regular use starts first kick cold or hot
@@MOTODANS thanks for the suggestion, do you run the stock carb?
Yep stock carb and all stock jets and settings, top of airbox removed and the butt plug removed from exhaust
@@MOTODANS hmm, I’ll have to look into the butt plug removal mod! 😂
@@MOTODANS thanks for the reply’s! Hope all is well, cheers
Do you have to mod arc on a 2007 it kicks very easy now no mode
No, yours is done from factory
Hi dan, should the acr have play on the end of the cam, bike started makeing a small wear sound after the last ride, iv taken the valve cover off to inspect the head and i noticed the acr has alot of side to side play, is this normal or should i replace the exhaust cam.cheers
What is moving the actual pressed on part? There should be no play in that.
@MOTODANS the pressed on part is solid but the other bits attached to it have alot of play
@@tjroxs21 mine did have some play hard to say without comparing what would be excessive though
@MOTODANS thanks for the reply, looks like timing is out half a tooth this might be the noise I'm hearing, time to get a new timing chain 😅
Hi Dan, is this the same process for a 2021 model 300?
Acr mod wont be required on yours, Valve check procedure will be the same, unsure if the specification for the clearance is the same though
@@MOTODANS Thankyou
What year klx300r? They did change the acr timing in the later models. Great trail bikes
Mine is a 1997, I believe they changed the cam in 2003? Which had the improved acr timing
Super reliable bikes. I've had alot of fun on mine on trail rides. Cheers for the videos
Hello mate , out of interest can the later cam be fitted in the 99/2000 bikes @@MOTODANS
@robertcampbell8311 Yep as far as I know they can. That would be your 2 options on the early ones newer cam or the acr mod