You deserve was more credit and views for the effort and detail you put in this video. If you could make a full service video for many different cars, I'm sure you'll hit 100k subscribers.
Very good work,but,in the future,when you replace the fuel filter,try to prime the fuel circuit with VCDS and avoid dry start of the engine because the high pressure pump CP4 is very problematic.On my car I have changed the CP4 with CP3 because CP3 is more solid.Keep the good work!
I noticed you didn’t use silicon grease on the brake caliper pins, you used copper grease. It this ok? I thought copper grease should not be used with the rubber boots? Great video and instructions
![Zahnriemen wechseln - Audi A4 2.0 TDI [TUTORIAL]](http://i.ytimg.com/vi/io7AP5-M3bM/mqdefault.jpg)
![ทางเดินชีวิต - ธีเดช ทองอภิชาติ x อ.ไข่ มาลีฮวนน่า [Official MV]](http://i.ytimg.com/vi/1f3wcG16dd4/mqdefault.jpg)
You shouldn't leave the bracket hanging, it is stated in any workshop manual! Very good video, very complete :)
You deserve was more credit and views for the effort and detail you put in this video. If you could make a full service video for many different cars, I'm sure you'll hit 100k subscribers.
You deserve more credit*
Thanks, I will think about it. 😉
Very good and detailed description! Very minor detail : I would be careful spraying brake cleaner into the Oil sump.
that's a great video. this is the best-explained service video. must watch, thanks
Rear caliper is simply pushed without twisting, but you need to retract the parking brake before with vcds otherwise you will break the motor.
Thank you!! Excellent video and work... thanks!
Glad it was helpful!
Nice I'm due to do this soon .👍👍👍.
Would love to see a dual mass fly wheel and clutch replacement on one of these .
Hi, thanks, maybe some day I will 😉
Very good work,but,in the future,when you replace the fuel filter,try to prime the fuel circuit with VCDS and avoid dry start of the engine because the high pressure pump CP4 is very problematic.On my car I have changed the CP4 with CP3 because CP3 is more solid.Keep the good work!
Hi, thanks for advising 👍
yes that was lame ! Never do it like this!
Nice video, very detailed!
Well done 👍🏻
After changing the diesel filter i guess you bleed the system otherwise the car wouldn’t start as there was air in the system
Great video .
I noticed you didn’t use silicon grease on the brake caliper pins, you used copper grease. It this ok? I thought copper grease should not be used with the rubber boots? Great video and instructions
Hi, yes your right ...coper grease is only for brakes pads and disc/alloy, for the caliper pins us only rubber grease.
@@FixYOURride13 ,thank you for the response
I think the paperwork will take longer to do than this service. And many hours charged for labor..😂🤯
Well this lad was videoing and explaining so obviously the job will take longer.
I have the same car. Will new engine oil turn filthy black after only a 40km drive?
Hi, it's nothing surprising all diesel have symilar efekt.
Whats the front brake pads part number?
Hi, call to your loca Audi Dealer .
Pushing the piston that way you can ruin the unit of abs.
Hi, never happen like that ....but if you have experience like that it will be good informational , thanks. :)
You like Indian song 😂😂😂
Hi, it's from "Inside Man"