Niels, no solo nos muestras un excelente y preciso trabajo sino que además aportas información extra en los comentarios. Personalmente intento aplicar a mi aprendizaje, muchas gracias, eres admirable!
vandoorenniels: Gracias a Vd. he leído en otro comentario que practica el engastado desde hace 3,5 años, supongo que también hace Vd las piezas, es decir, que es joyero además.
I have seen many video and I can tell that your one is the best or the 2nd best I have seen ! You showed all part of the pave setting work so well ! That was amazing 🤩, we can really see what kind of work is required !!! Thanks you 👏
vandoorenniels thank you very much for your reply. Your work is a pleasure to watch. I am going to make my own wedding ring with sterling silver and a wood inlay.
@@heinikendude actually you mainly do this so that each hole has the same distance inbetween each other. holes should be bigger than the stones ex. 1.15-1.19mm stones have a hole of 1.2mm
As a Goldsmith I have upgraded to pneumatic tools and diamond sharpening for setting but am trying to figure out if I can sharpen and use carbide tools without the health hazard associated with the dust. Maybe do sharpening in a separate area, I do not think this issue has been dealt with adequately.
Roy Aaron thanks for asking. I know measure the exact diamond diameter and then just filll up the whole strip with it. The small filet cuts at the side gave me some space to fill a possible gap.
Niamh Manley Hi, and thanks for your question. The ring was 3D designer and printed on a form 2 printed. The width of the wire is 1,5 mm. Diamonds are 1,30-1,35. All gravers are sharpened by myself so there is no real size. ;-)
Hi, thanks for the video.. very helpful. I was wondering if you use a pneumatic tool like GRS Gravermach to cut and cleanup in the end or just do it free hand?
Niels, no solo nos muestras un excelente y preciso trabajo sino que además aportas información extra en los comentarios. Personalmente intento aplicar a mi aprendizaje, muchas gracias, eres admirable!
millionmilesman Gracias para dejar esta mensage ! Buon dia!
vandoorenniels:
Gracias a Vd. he leído en otro comentario que practica el engastado desde hace 3,5 años, supongo que también hace Vd las piezas, es decir, que es joyero además.
Absolutely stunning!
TheGrandFanelli thanks for the reply!
I have seen many video and I can tell that your one is the best or the 2nd best I have seen !
You showed all part of the pave setting work so well ! That was amazing 🤩, we can really see what kind of work is required !!!
Thanks you 👏
I love when the holes get bigger. And of course the gems setting
Liam Jones thanks and the slow upscaling of the holes is a crucial part of the micro setting
vandoorenniels is that so you don't go too big? I noticed not every diamond fit in every hole.
Liam Jones yes, the diamonds vary a tiny bit and are therefore all drilled a bit smaller than the actual size to make sure it will fot
vandoorenniels thank you very much for your reply. Your work is a pleasure to watch. I am going to make my own wedding ring with sterling silver and a wood inlay.
@@heinikendude actually you mainly do this so that each hole has the same distance inbetween each other. holes should be bigger than the stones ex. 1.15-1.19mm stones have a hole of 1.2mm
Beautiful work and ring. 😊
Thanks!
Excellent work I see you are very meticulous when you do your work, that’s what makes it look beautiful
Thanks Julio for taking the time to comment
Who ever got this ring is very lucky. IT'S SO BEAUTIFUL
Thanks Karen for your comment!
Magnifique , j'adore vos méthodes de sertissage
Laftas Reda merci pour votre commentaire
Hi vandoorennels thanks for taking the time to answer mi questions.
José Linares de nada
Magnifique stupéfiant époustouflant très beaux grand bravo vraiment grand merci
Amani il etait un traivail beau !! Merci
nice job very talent master greetings from Sydney
Shant Kevorkian thanks for your comment !
Just magnificent!
Thanks Eduardo for your comment! ;-)
I cannot wait to go on my setters course in the new year
Have fun !
Todo Un arté impecable y delicado trabajo
Muchas gracias !
Imponente, maravillosa obra, tiene todo el talento del universo 💍✔️❗❗❗❗❗❗
Thanks for your comment Jairo, make sure to follow our channel ;-)
Mis respetos maestro toda una obra de arte hecho en joya
Muchas gracias amigo !
😊masterpiece😊
Thanks!
Thank you for the videos or I am a Indian micro sater this video big help and thank you thank you thank you thank you thank you thank you
King Maker Soumen thank for your comment. Good to hear ! Good luck training in India
As a Goldsmith I have upgraded to pneumatic tools and diamond sharpening for setting but am trying to figure out if I can sharpen and use carbide tools without the health hazard associated with the dust. Maybe do sharpening in a separate area, I do not think this issue has been dealt with adequately.
quail333 good question. I’m about to purchase a specific vacuum equipment for this purpose.
lindo trabalho , explendido !
robbike thanks for your comment
Nice
Thanks Amir
Awesome!
Carianin 52 thanks !
Does you microscope has a video out or what camera and lense do you use to get the close up?
José Linares I use a magnification lens and a separate simple Sony camrecorder.
Wow! Your videos are amazing!!! Thank you for sharing. 😃
Whats the name of instrument,,which has ring is fix for setting..plz sir..lv frm india
Show ficou magnífico
Gracias
Hi Nils, is de Jura divider beter dan de Alexander divider? Hoe is de kwaliteit kwa elektronica van de Jura, vergelijkbaar met een Mitutoyo ?
What kind of bur are you using to cut the side scallops at around 7minute 40 seconds?
This is a tapered bur 0.7 mm ;-)
How do you know how far to space your calipers to get an exact amount of diamonds to fill the space?
Roy Aaron thanks for asking. I know measure the exact diamond diameter and then just filll up the whole strip with it. The small filet cuts at the side gave me some space to fill a possible gap.
Hello what type of steel do you use to make your tools and what is the polisher that you use for the tools?
93Vulture polisher is diamond disk. And steel is mostly carbide
Hi. What microscope you use? And what magnification to be able to set stones.
Emil Diaco I use a Meij microscope from Japan
Hi! Amazing work! Can i ask the diameter of wire used for the ring? and the size round graver you use for carving out the pave setting? thank you
Niamh Manley Hi, and thanks for your question. The ring was 3D designer and printed on a form 2 printed. The width of the wire is 1,5 mm. Diamonds are 1,30-1,35. All gravers are sharpened by myself so there is no real size. ;-)
gracias por permitirme
conocer su trabajo ya que dado y dar a conoser este arte a personas como yo aprendi si tener un instructor
explendido
Thanks man!
can you please tell me what the device is called holding the ring
This is a special fixture made by JuraTools. Check them out!
it was cool
Thanks Maks
whats a good price to pay for 100-1mm preset prong setting🤔
Dear Jason, if you email me at info@vandoorendiamonds.com I can give you more info
What is that measuring tool called , were you marked precisely
naveen kumar that’s a divider. Check out juratools.com
vandoorenniels thanks , and nice work from you , i love your designs ,
Plz.. sir show me
..(presar setting)..in Gold.metal
Hi Gyana, wjhat do you mean by presar setting?
Wow!
Campro Nos gracias !
Hi Niels, great video! What do you use to hold the diamond to the beading tool when you insert it into the setting? Again great video...Thanks!
JF McAlister water. Simple matter of adhesion on the table of the diamond
thank you!
9@@heinikendude
Adamsın süper ıdee pergel yerıne mıkrometer 👍😎
Hi, thanks for the video.. very helpful. I was wondering if you use a pneumatic tool like GRS Gravermach to cut and cleanup in the end or just do it free hand?
access hi, its a pneumatic tool. The splitting of the prongs is done manual.
What is the name of the tip in 15 min plz
bug bunny™ leonardo that would be a tapered bur ;-)
👍👍👍
Awesome job do you live in the USA,how long have you been setting diamonds ?
José Linares hi, I live in Europe. Belgium more precise. Been setting diamonds for approx 3,5 years now
สวยครับ
parn น English please ;-)
gracias por permitir conocer su trabajo y trasmitir su conocimiento a personas como yo que no tuve un maestro
How much does this ring retail for just out of curiosity?
Mazurat unfortunately this info we will not share in public. you can send an email to info@vandoorendiamonds.com to get a quote.
👏🏼👏🏼👏🏼👏🏼👏🏼👏🏼
H Mar thanks !
Dada tomar kacha ai kaj to hoy mayko ami kaj korbo naban
Hi My friend english please?
Camera Very shaky
Hi C,
Trying to improve my recording skills
поставить камни вообще не вопрос, как сделать такое кольцо?)
Александр Широков sorry i cant translate. English please ?
diamonds fasten easily, make a ring difficult
Вырезать из восковки и отлить. Как раз сделать такое кольцо не проблема, а вот камни поставить...
是
English please? ;-)
lindo trabalho , explendido !
robbike gracias amigo
Nice
lindo trabalho , explendido !
Many Thanks!
lindo trabalho , explendido !
Thanks!