2mm white D/E VVSI/LC Micro Pavé Diamonds All around in 14 kt Yellow Gold eternity band
ฝัง
- เผยแพร่เมื่อ 3 ต.ค. 2024
- In this video jeweller and diamond setter Niels van Dooren setting 2 mm (0.03 ct) white loupe clean diamonds in a yellow gold wedding band. The diamonds are all exactly measuring 2 mm to create this smooth pattern. The use of Micro Pavé Technique creates a unique ring.
The diamonds each weigh approximate 0.03 ct and are hold with shared prongs. By creating seats with a carbide round bur you can see the distance from another. Afterwards a bright cut is created with a 60 degree carbide graver which was high gloss polished. These are polished with ceradent polishing wheels. Furthermore tiny prongs are created by removing excess metal with a flat graver into the seat. Then, gently the diamonds are put in place into the ,relatively soft, yellow gold. With a tiny prong pusher the golden prongs are bent over the diamonds thereby holding tightly two diamonds at the same time.
The ring was later polished with high gloss diamond polish.
All in all this was a beautiful ring to work on.
Thanks for watching!
Visit: keesvandooren.com and
vandoorendiamo...
FOLLOW ME:
Instagram: bit.ly/2UpOCOX
Facebook: bit.ly/2XJgeRl
Contact us for unique jewellery designs or orders: info@vandoorendiamonds.com
I really want to be someone's apprentice. I build homes, build 1000hp Muscle Cars and this right here gets me xard as a diamond. I listen to blues while I remodel homes. I listen to 80s and heavy rock music while restoring cars. And I need to be able to design and give my girls (Wife and Daughter) jewelry just so I can listen to Tchaikovsky, Bach and Beethoven...... If you're ADD and you know it 👏🏼 your.....
ES INCREIBLE QUE LAS PIEDRAS SE SOSTENGAN CON SÓLO UN PEDACITO DE METAL, ES UN EXCELENTE VÍDEO. LES DEJE SEGUIR TODA LA PUBLICIDAD, SE LO MERECEN.
Muchas gracias Marzea!
Your graver work is very nice. I struggle to get that line so perfect, but maybe over time I will achieve the level of excellence you have.
Practice makes perfect. !
Incredible to watch such skill. I really appreciate seeing it in this much detail and so clearly. What level of magnification are we looking at approximately? Im fascinated by men setting - the level of precision required is incredible.
Perfection at finest, well done, thank you for sharing
Thanks for your comment! ;-)
Alamnya mantul liat juga keindahan budaya saya ya.done full
English? ;-)
Awesome coordination...
Much appreciated!
Ik vond diamant zetter met twee potjes altijd mooier , i love it.
Hala Istifan 👍
, ....... it looks so easy , ... but it needs Time to be good . Perfect Niels !
Takes years ! ;-) Thanks for your comment
@@heinikendude , ................. !
Impresionante 👍🎨 dé muchos kilates y buena manifestación
Gracias Jairo!
Your fingers are amazing
Thank you very much Pheng!
Nicely done 👌👌
Thanks Milan !
Excellent 👌
Thanks Again ;-)
I've watched this a half dozen times. Amazing! Why do you go two forward and one back with the ball bur? Does it help keep the holes evenly spaced?
Great job! Thank you for sharing!
You are my superhero ❤
That fkn music is a killer
Very cool
Thank you TJ
Super
This guy has superhuman gift ! Superb ! Please be my mentor 🙏🙏🙏🙏🙏
Thank you for the video
You're welcome Mourad Ouzine
Super...masrer
Thanks for your nice words !
I am looking for a 18kacrosson both sides of ring was gold band thank you so much for helping me
Hi Rhonda, please email me for more information! ;-)
Good watch, I've never thought of undercutting the prongs with that straight burr tool. I guess that's so the prongs move easier?
Hi Metalion! Yes that's correct! ;-)
Hi, where was that?
@@yossipariente4165 he's doing it around the 13:00 + time
PARABÉNS INCRÍVEL SEU TRABALHO!!!
Thanks Kleber!
As always, a great job! Thank you for the video.
Thanks for your time and comment! ;-)
hermoso trabajo
Gracias Jorge!
Good job thank u
Thanks got your comment Laid! ;-)
Hi,good job,
You mentioned that the marked on the rings same as stone sizes ,but geometrically stones go down little bit deeper stones can be touching each other and can be broken ,usually i keep 0.15mm space between the stones
Hi, that is correct. But as the actual mark itself is also almost 0.1mm this is enough for me.
;-)
What is that tool that’s being used after the ball burr. The one that’s scraping away metal ? I’ve been trying to figure out what that is
Ахреннено вы это делаете ,как профи потдверждаю.
thank you!
Precioso trabajo
Gracias Javigas!
I have been a professional diamond setter for over forty years and this is not pave it is in fact called bead setting. Why don’t you drill through and azure the back of the holes? How can the diamonds get cleaned without the holes being drilled thru? Just sayin.
Hi Joe, let's agree to disagree. I think this is micro pave and as for the holes through the back, this is not necessary. As I believe grease and moisture can only get trapped between the finger and the cullet of the diamond that way. As for Azure.. I would love if there was time for that. Also it does something with the strength of the ring. Therefore I would not recommend it.
Right
Hi, srry domme vraag maar gebruik je exact dezelfde diamater bolfrees voor de diamantjes of neem je 0.1mm kleiner want als ik b.v 2mm bolfrees gebruik voor een 2mm steen zie ik dat er geen weerstand heeft om die steen een beetje strak erin te plaatsen.
labor n craftsmanship
Thanks Jermaine for your nice words ;-)
Your work is amazing!!!
Would you please tell us what music you used!
Classic music =classic work!
Thank you!
Hi Amilia, thank you very much for your kind words ;-)
Hi @Amillia222 - just saw your question - to answer, i do not no the first piece of music, but the second is definately one of my favorites - its Tchaikowskij and the 1812 Overtüre :)
Es Vd un maestro de exquisita precisión.
Soberbio superb
Is this hand pave or are you using a gravermax type tool? Very inspiring and informative work
Parabéns, é apaixonante seu trabalho
Gracias ! ;-)
magnificent ! Thank you for sharing. how much is the ring in width and thickness? there is approximately how much distance between the stones? thank you and bravo
Hi Laurent, This ring is about 2.6 - 2.7 mm wide. Thickness I believe also at least 2.2 mm. The distance between the stones is almost none ;-)
What do you use for.the stones to nat fall off!!?..what's the best to do?
Thankyou 👍👍👍👍👍
You're very welcome ;-)
Excuse me sir can you show about price some of gold plainner tools
Hello please can you tell me about the brand of your drilling machine sir?
I never saw any one drill some much and so deep in TH-cam history.. starts with 30 grams of gold ended with 9 grams
hello, excellent work, see how do you calculate the amount of stones in the ring? I really appreciate the videos, they are inspiring :)
Hi Kamizama2, I make small marks with a divider. Then I continue all around the ring. When the last one doesn't match the first I slowly creep up to the next mark. You should definitely try it yourself a couple of times
@@heinikendude Thank you! I'm going to do it these days.
This is one of my favorite jewelry porn channels. Thanks so much for sharing! Do you take requests? If so, I’d love to watch some pointed facet settings. 🙂
Nice work bro 👌👌👌
Thank you for your kind words! ;-)
Would you please provide actual names of all tools or purchase link
When setting these 2mm Diamonds, how far apart are the center of the diamonds to each other, do you have that 1mm(or another measurement) space in between or go exactly 2mm apart making the diamonds touch one another. Please let me know thank you for these videos as well.
I try get these as close as possible (no room in between) so i can use one prong to secure two stones at the same time
Center of the Diamonds Diameter
Center of the Diamonds Diameter
@@vhong68 he said 2.2mm in another comment
@@noahhill6434 the CULET is the Centralize part of the Diamonds. Maybe, appx 2.2 mm
Sir i want learn this setting can you help me
STELLAR work and t.y. for sharing your craftsmanship ! Could you PLEASE tell me the name of the tool that you use to pick the diamonds up with to set the diamonds into the settings ? T.y. so much for your time if you see this and can help.
He uses a beading tool, the only reason the diamond sticks on is because some setters will lick the tip of the beading tool to pick up the diamond. You can also use a beeswax dop stick, it's just a little messy, but you can clean it up after
That's great
If your stone is 2 mm
What's the distance between to stone?
What was the number of digital caliper when did you sign ?
2.00 mm exactly ;-)
Are you only using a ball burr to cut the seat for the diamond? I normally use a ball burr to get the hole close to the size then use a heart burr to cut the seat. I see a lot of videos where it looks like just a ball burr is used. It seams like you have more control over the height of the stone with this method. If you are what size burr compared to the stone? TIA
I notice that in this video you drill to a shallow depth where most videos I see drill all the way through the metal while paving, what are the pros and cons and when should one drill or not drill all the way through the material?
Hi A people, that is correct, I do not drill completely through the metal.
Main reason is because a good cut and high quality diamond shines and reflects light in itself. So there is absolutely no need for a hole. Also I believe that these tiny hole cut through are just a place for dirt to form and pile up. And on a side note these solid rings are obviously a bit stronger and will last longer ;-)
You like...!!!
Thanks!
Where did you learn ?
I was taught by Jura! The BEST
@@heinikendude thanks for the reply , I hope to go there one day
I noticed you didn’t use bur life ?
Hi, please can you do a 4 or 6 prong setting solitaire video?
Hi Allen, I mostly recored the work that I do behind my microscope, so don't normally record solitair videos. I'll try to make one in the near future ;-)
Just how do you know exactly how many diamonds will fit perfectly around the ring?
Math 😂
Hi K Jenkins, We do some math ;-)
Nhẫn đẹp đấy
English please? ;-)
🙌👍бома
Thanks!
Very neat setting... Amazing job... What degree of graver you use for this job...? Is that 70 degree graver...
Hi Muhammad, thanks! This is a 60 degree graver. ;-)
Thanks for the reply....really appreciate that.. 😊😊
What is the name of the metall that pushes the gold ?
From miute 9 to 10?
Hi JKL this is a 60 degree sharpens carbide graver ;-) Check out JuraTools for this
There are no vacancies for work?
Hi Biman Das, No we are a family business. Unfortunately no vacancies
Love it. I wish i could do it😁
Thanks for your nice words J J. Takes a lot of training ;-)
Wow..
Thanks Andre! ;-) We do our best
Nice work! What make of Vernier Callipers are you using to mark out the stones? They look fantastic for the job!
Hi Dave, thanks for your nice words. I use a divider made by Jura Tools. Check them out and mention my name ;-)
Hello Your amazing you do I like I want to your tools please.May i known your learning your my teacher
Regarding the 18k series golden making,
I thought the handing processed should be
changed to 3-dimensional process by stereo laser level gauge ruler
for decorating the chips diamond
Hi, I don'f fully understand your question / comment. These are all fully brilliant cut diamonds with each 57 facets. So these are nog just diamond chips ;-)
what suitable microscope tool for this gem stone setting ? thanks
good
Many thanks!
Plz tell me how u polish ur graver
Hi Aakash, I do this by hand with a edentate wheel.
Because the decorative diamond or the others precious gemstone is must for
jewelry of marketing by computerized machine
I strongly believe that computerised machines are not capable of creating this exact diamond setting style ;-)
the music note at the end of the video .. the name please ?
Hi Yousuf, don't recall the exact song. But it's from the TH-cam Music library. You can also shazam it ! ;-)
@@heinikendude the muic is one of the bachianas Brrazilian comoposer Heitor villa lobos
Te music is one one of the Bachianas by The Brazilian Composer Heitor Villa Lobos.
th-cam.com/video/pgXrrFt-Uzs/w-d-xo.html
How you make the diamonds stay here?
Hi Oliver we create tiny prongs and bend these over the diamonds.
Hi
Very nice work!!
What do you use to pick up the stones?
Hi Steve, I use a nail with a hollowed out tip. Dip it in a wet sponge and with the forces of adhesion I can pick up the diamonds ;-)
@@heinikendude do you use water in die sponge
How long does the setting take you? When I, a hobbyist do a full eternity ring, it usually takes me about 6 hours (and it's not nearly as neat, I need 4 prongs). How slow am I compared to this master?
Hi
In your initial markup, how much clearance do you allow stone-to-stone? do you build in actual clearance or just fudge it by smidge? like a couple thousandths?
Actually all stones are hand calibrated by myself so in these layouts i don't create any clearance. Sometimes I might add 0.1 mm for stones 2mm if these are older cuts or from a client ;-)
Hello my frend i from russian and i have questions. An example i have two milimetr diamond and hole two milimeter?
Hi Kajfasz, You're correct! The hole should be no bigger than the diamond itself.
If you do flush setting start with 1.9 mm burr and be very careful.
@@heinikendude thank you very much. I start learn this profession and my komwlwdge is very small.
How secure is pave setting compare to prong setting?
Hi Rico, pavé setting is definitely more delicate compared to prong setting. As the tiny prongs are relatively small compared to the traditional prong setting. However for some types of jewellery it can be very beautiful and also safe. So it depends a lot on the design ;-)
😍😍😍😍
what dividers are you using?
What does LC mean
So I must ask.... Is the reason you skip over your hole in the beginning to get the set going? Then pressure takes the rest of the way?
ماشاء الله سبحان الله
سبحان الله الوهاب
Thans |I guess ;-)
👏👏👏
Absolutely nosense a D color for a ring.
Hi Leo, We believe in using only the best quality for our products. ;-)
vandoorenniels sure,but if you build the same tennis in E color vvs1 the results is the same😂
this yellow gold 14k was able to pawn?
Hi, what do you mean with pawn? We create custom pieces for clients ;-)
What were you doing with the drill in 11:41 ?
Hi Ownroad, this is cleaning up the metal from the downcuts.
I am diamond setter of diamond jewelry all setting work
Can I know about that machine
What machine do you mean?
@@heinikendude about your drilling machine sir
If i may ask
Whats the measurement you take between each mark before you set 2mm stone here?
Also what is the size of the prongs before 'curling' it ?
Im trying to figure how tiny it is;)
Hi Cornball, the marks are 2mm. So the same size as the actual diamonds. As for the prongs I estimate that these are 0.3 to 0.4 mm each
👍👍👍🏆🎁💍
Thanks!
Song name please and thank?
Hi, It's some classical song from the TH-cam audio library ;-)
1812 Overture: th-cam.com/video/pgXrrFt-Uzs/w-d-xo.html
😍
Thank you Leona!
Ten fe
สุดยอด
Thanks for your nice words!
Minta to long dijawab mass 🙏🙏🙏🙏🙏🙏🙏🙏🙏
Berapa harga micro setting yah mas