Hello I'm new to protool I just change the injectors and tried to code them .. when I enter the new flow value it tells me operation successful but the value never changes ... when I refresh the dme it tells me the old value how do I now it did code them???
Hi. I followed your instructions and after I coded my new injectors, my car won't even crank over. My car was running with the new injectors before I tried to code them...
Recheck the steps, i’ve had alot of people use my vid with success as i’ve done myself. Trust me you did something wrong here.. Did you type the numbers without the dots?
When you understand what a code of three and three more digits means, it went away after two years of operation of the injector. Your BMW coding is not valid. I wanted to make a stand and generate new codes, but piezo injection cores are no longer interesting, they are like
I have a wireless mhd adapter that creates a "wifi" signal. Is it possible to use the mhd wifi signal to connect the protool instead of using the cable?
Hey there looking forward to using this in the future I appreciate it thank you so much also had a question was wondering if this app also can reset the adaptation for your Medtronics shift solenoids within the automatic transmission instead of having to use a laptop ?
@@ot2nie If you could edit the video, the Diagnostic license is needed for calibrating injectors. Not coding. Thanks- BimmerGeeks. Thanks for your support, great video!
Thanks for sharing.. about to get on this next week when my new EU5 come in! Do you know there's any concern doing this over the Bluetooth option as that's what I've been using for over 2 years now..thx. Great content!
Nope, if it works for other stuff, it should work for injector coding as well. Not really much that could go wrong in there, it either saved the new values or not, in both ways the car will still start😉
Do u have to pay to code? Or is this function free?
Will it work with mhd wifi adapter?
Yes
Thanks for the video. My INPA software was giving me an issue. I used my MHD Bluetooth adapter and that worked without a problem.
How did you do this? I installed my injectors but now need a way to program. I have MHD but how do you use that
@@luismazariegos4169I know I’m 8 months late, but you can’t code with MHD, he meant he used the MHD Bluetooth on the Protool by Bimmergeeks app
can you do this for 1 injector
Hello as the program is called
Cool.
When you did the coding, did you set vehicle back to stock ecu or did you do it with Jb4 or Mhd on.?
U can do it with JB4 or MHD on yes.. As long you change the injector code's and it saves, you are good to rock n roll
What’s the name of the app
Hello I'm new to protool I just change the injectors and tried to code them .. when I enter the new flow value it tells me operation successful but the value never changes ... when I refresh the dme it tells me the old value how do I now it did code them???
Did you ever figure this out? I’m having the same issue
Did you ever get it to work? I need to do this as well.
Hi. I followed your instructions and after I coded my new injectors, my car won't even crank over. My car was running with the new injectors before I tried to code them...
Recheck the steps, i’ve had alot of people use my vid with success as i’ve done myself.
Trust me you did something wrong here..
Did you type the numbers without the dots?
Did you ever solve this I got the same problem
@@ot2nie hello did soenbody fucking solve this or what
@@KyoChuffy well it worked flawlessly for me, i know you need to type in the numbers without the dots, maybe that went wrong?
@@ot2nie yeah i wont lie thats what it was lol sorry thank you for video
When you understand what a code of three and three more digits means, it went away after two years of operation of the injector. Your BMW coding is not valid. I wanted to make a stand and generate new codes, but piezo injection cores are no longer interesting, they are like
There is no problem if I have different injectors???
thanks man, great video!
Only time could tell how I feel about you I'll be Paris you'll be Nicole Hold my birken all pack the bowl
They Charge $80 to make any changes.
Hi mate do I need to buy the bummer geeks lead or will one of Ebay be ok
Ebay one should be okay but keep in mind, they are slower and are sometimes faulty.
I bought one from BG for about $50 and it’s the fastest i’ve had.
@@ot2nie are great I will do the same thankyou
Will you have to recode if not replacing, just cleaned and replace the seal?
No, not necessary in that case!
@@ot2nie Thanks bro
@@TONY63557 just make sure you put them In the same place they came out from
I have a wireless mhd adapter that creates a "wifi" signal. Is it possible to use the mhd wifi signal to connect the protool instead of using the cable?
I honestly don’t know..
Best is to contact bimmergeeks directly for that!
@@ot2nie I was able to use the mhd wireless adapter to use protools to code my injectors....
@@motown862000 nice!
How did you do it ? I have a. Mhd adapter and want to code the injector
Chicago loves you yeat chicago loves you
Whats that cable called?
K+DCAN a little late on the response 😅 hope you got it situated already.
Thanks for your video
Many thanks your reply to my question really help me a lot I just code my injector on BMW X6 xdrive
Is it possible to use it on other cars?, like renaults mercedes
I mean the dcan sorry
Hey there looking forward to using this in the future I appreciate it thank you so much also had a question was wondering if this app also can reset the adaptation for your Medtronics shift solenoids within the automatic transmission instead of having to use a laptop ?
If you don’t mind me asking what would the driving procedures be
@@ot2nie If you could edit the video, the Diagnostic license is needed for calibrating injectors. Not coding. Thanks- BimmerGeeks. Thanks for your support, great video!
the injector shown as 02:36 is a fake! the injector body should be grey!
I is black lady
how can i use protool to code ekp(fuel module) ive tried and wasnt able to understand it
Thanks a lot😊
Yes I is yes I is
So do you just type in the all 6 numbers from top to bottom?
Yes 6 nr’s on the injectors should be put in the app!
Does it work for N63 motor?
Yes sir!
Used this video to code my own Injectors, super awesome!
Also found a small hack on how to take them off if anyone has interest. Again many thanks!
Please me I need help taking off the old flow values
How to take off the injectors hack?
The hack ?
just use the fuel rail to grab and pull
I have a small video on how to do it on my channel.
Will this work on x6?
Yes it will!
@@ot2nie It works on my BMW X6 I really appreciate you sir many thanks
Thanks for sharing.. about to get on this next week when my new EU5 come in! Do you know there's any concern doing this over the Bluetooth option as that's what I've been using for over 2 years now..thx. Great content!
Nope, if it works for other stuff, it should work for injector coding as well.
Not really much that could go wrong in there, it either saved the new values or not, in both ways the car will still start😉
@@ot2nie most appreciate it! 👊🏽
@@richcruz8924 welcome, sir😅
Awesome video! Thank you!
You’re welcome sir😉
So I’m guessing injector 1 is basically cylinder 1. Injector 2 cylinder 2 is that how it goes?
That's correct sir!