This is a great setup!! I have an extreme ISO and use HDMI output 1 for a FOH monitor which displays a deck. I use HDMI 2 for program out which gets routed to digital signage displays. While i have 2 cameras which are placed not far from me i can see everything but i didn't have a multi-view. However, after seeing your video i used your method and a Streaming Bridge I had laying around to display my program out to my digital signage. Which ultimately freed up my HDMI2 output for a multiview monitor.
Hi @waltjennette Im having issues about delay between atem mini pro, and streming bridge.. is there anyway to have better results?... because its extremely depressing the latency.. thanks a lot!
There's a pretty huge real time delay between the Atem Mini and the Atem Streaming Bridge when viewing straight through HDMI. Is there any way to reduce that to use in a more live to screen environment?
Walter… anyway to simulate another USB-C with a hub other than upgrading to Extreme? I’m using Riverside and it needs that USB-C connection to my Mac… but I also want to record multi cam to an SSD… torn.
You don't have to use the monitor. That's just what I had available at the time of making this. You could use an iPad if you have the newer ones that allow for capturing instead of just outputting. I also have an Acsoon Seemo that turns my phone or iPad into a capture card.
Hello Walt, maybe I'm missing something. If you typically use the Pro to stream to a specific platform. I assume you would just put your platform and stream key into the streaming bridge. What do you use for jnternet service if you use the ethernet port as a video source?
Great question…that’s if you’re streaming directly from the Atem Mini Pro, which I’m not. In my use case, I’m using the Atem as a webcam inside of Ecamm live so it frees up my Ethernet port
So in my case, yes because I'm not using the Atem Mini or the Streaming Bridge to stream. Remember, I'm using the USB C output going into the computer that allows the software to recognize it as a webcam.
Can you unhook everything and show us how to connected everything or can you send the instructions bc it’s something I’m missing because my output not coming showing?? I’m so lost. Right now I don’t have access to the hdmi to get the multiview which I need so we have hdmi out going into a 1 in 8 out splitter for the 5 TVs in the church. Now that I have streaming bridge I can’t get output to appear.
@@bernettaparker3739 Use the HDMI out for your multi view. If you followed his directions to the T, Once you select "ON AIR" your program out should be displaying from your Steaming Bridge HDMI out, which you can then connect to your HDMI splitter to your 5 displays
@@chaunceyplummer65 thank you it’s setup this way only problem I got now is getting my Obs output to come out to the tvs now. It’s will come up on the the external monitor or the iMac monitor. I’m trying figure out what adapter/cable to use to hook up to the iMac to act as a 3 input on the stem mini or another output for the iMac.
Do you think it's worth getting the streaming bridge? Or just go ahead and upgrade to the Atem Mini Extreme?
This is a great setup!! I have an extreme ISO and use HDMI output 1 for a FOH monitor which displays a deck. I use HDMI 2 for program out which gets routed to digital signage displays. While i have 2 cameras which are placed not far from me i can see everything but i didn't have a multi-view. However, after seeing your video i used your method and a
Streaming Bridge I had laying around to display my program out to my digital signage. Which ultimately freed up my HDMI2 output for a multiview monitor.
That's a dope setup! Glad my video could lead to something else for you!
Thanks for sharing the details 😊
It would be nice if you had a topology drawing of your setup. Maybe Visio or something else. Nice video. Well done.
Hi @waltjennette
Im having issues about delay between atem mini pro, and streming bridge..
is there anyway to have better results?... because its extremely depressing the latency.. thanks a lot!
There's a pretty huge real time delay between the Atem Mini and the Atem Streaming Bridge when viewing straight through HDMI. Is there any way to reduce that to use in a more live to screen environment?
Walter… anyway to simulate another USB-C with a hub other than upgrading to Extreme? I’m using Riverside and it needs that USB-C connection to my Mac… but I also want to record multi cam to an SSD… torn.
Thanks for sharing this info!
You bet!
If you have the ATEM Mini extreme ISO do you still need the ATEM Streaming Bridge
how to send the multy view to the streaming brige ?
Can you send the multiview to the streaming bridge?
Do you have to use the Feelworld monitor? Or could you use an iPad?
You don't have to use the monitor. That's just what I had available at the time of making this. You could use an iPad if you have the newer ones that allow for capturing instead of just outputting. I also have an Acsoon Seemo that turns my phone or iPad into a capture card.
Hello Walt, maybe I'm missing something. If you typically use the Pro to stream to a specific platform. I assume you would just put your platform and stream key into the streaming bridge. What do you use for jnternet service if you use the ethernet port as a video source?
Great question…that’s if you’re streaming directly from the Atem Mini Pro, which I’m not. In my use case, I’m using the Atem as a webcam inside of Ecamm live so it frees up my Ethernet port
Hey Walt, Can you still Live stream to TH-cam if you use this setup?
So in my case, yes because I'm not using the Atem Mini or the Streaming Bridge to stream. Remember, I'm using the USB C output going into the computer that allows the software to recognize it as a webcam.
Can you unhook everything and show us how to connected everything or can you send the instructions bc it’s something I’m missing because my output not coming showing?? I’m so lost. Right now I don’t have access to the hdmi to get the multiview which I need so we have hdmi out going into a 1 in 8 out splitter for the 5 TVs in the church. Now that I have streaming bridge I can’t get output to appear.
@@bernettaparker3739 Use the HDMI out for your multi view. If you followed his directions to the T, Once you select "ON AIR" your program out should be displaying from your Steaming Bridge HDMI out, which you can then connect to your HDMI splitter to your 5 displays
@@chaunceyplummer65 thank you it’s setup this way only problem I got now is getting my Obs output to come out to the tvs now. It’s will come up on the the external monitor or the iMac monitor. I’m trying figure out what adapter/cable to use to hook up to the iMac to act as a 3 input on the stem mini or another output for the iMac.