While many people diss the Atem television studio HD as a paperweight, I have incorporated it into my workflow with the Atem mini pro. This gives me 11 input sources.
Hello Frank, I work in TV production and I need to solve a problem. Namely, I use an Nvidia graphics card in Mosaic mode with a resolution of 3840x1080. I need to introduce two HDMI inputs (each 1920x1080) from the computer into Blackmagic studio as two separate video inputs. But I also need two video outputs with two different signals from computer to the broadcast mixer. One would be used as an SDI output, and the other could be used as an auxiliary output. Am I right. Thanks
Hello sir i am from india i saw your video you gave good information i live stream on youtube sometimes i live out of city from village then i have a lot of network problem due to network is not good the live stream goes on intermittently make a video on this sir
Why you streaming at VMIX? You have Web Presenter! You can take master-signal from notebook (with graphics, all cameras and sounds) and send it to Web Presenter. And then Web Presenter will stream it with LAN-port.
Thank you for this amazing video. I'm a member of my church media Team, I do projection and switching together, one of our camera is NTSC(Sony NX100) which our ATEM production studio 4k does not recognize, I think it was wrongly programmed because the second one (Sony NX100) is not NTSC. How do I get the Video mixer to see it. I know of scalers but any other options or connections?
A question so the audio ports in the black magic Atem are only outlets and not input source for sound ? Or i can still use them to feed sound to the atem Direct from my mics
No, they are only XLR audio inputs and not outputs; and yes you can feed sound directly from mics or from a sound mixer. For audio output you can use the headphone output located at the front of the Blackmagic Atem HD
@@tobiasmanyi_esimbayachache6426 you should still receive audio, if not check the software. You may have to adjust the audio delay. Oh make sure it’s on mic and not line unless you’re coming from a mixer.
@@KomuFrank my end goal is to live stream.... I have WIRECAST for Live streaming (better than OBS). But i dont know how to get my mac to recognize this switcher.
Hello, I can make this ATEM Studio TV HD connection (with two Sony cameras by SDI or HDMI NXCAM, NeoID by HMDI) with Multiview on an isolated monitor on a PC with vMIX (without the notebook as input) and without the Web Presenter to then take the PC with vMIX and send the extended screen to output to a 1x8 HDMI Splitter?
Yes, you can output your vMIX to a HDMI splitter for actions such as projection or showing the same feed on different screens. For Multiview to work you need a HDMI enabled TV or monitor. Thank you for watching. Remember to subscribe🙂
The Blackmagic ATEM HD doesn’t have a picture in picture function like other units. However, you can use the Down Stream Keyer with mask to simulate PiP.
No. But there is a work around you can explore. For the new Web Presenter HD you can stream to one platform via ethernet (input settings on the app) and then send the feed via USB to your desktop live stream encoder and stream from there.
Question why aren’t you streaming off the web presenter? Doesn’t not use the full capacity of what it supposed to do which is to stream off the web presenter? Like for my set up we stream right off the presenter once we start it on Facebook
I don't know what the fucking web presenter's problem is, I got everything hooked up right but the presenter still shows a black screen instead of the input from the switcher. Any advice??
SUBSCRIBE & LIKE this video to help me grow the channel. Peace✌🏾
You are a truely amazing educator. Be blessed Frank.
Thank you for watching. Remember to subscribe🙂
While many people diss the Atem television studio HD as a paperweight, I have incorporated it into my workflow with the Atem mini pro. This gives me 11 input sources.
That's awesome 😎
thank you for this tutorial video you are amazing guy
Glad you enjoyed it
thank you very much and I hope to you a great life
I'm search this type video in last 4 days and finely thankyou so much brother for supporting Subscribe for this video love from India 🥳👍
You are welcome
Thanks for sharing!
You are welcome, be sure to subscribe and turn on notifications for new content alerts
So helpful thank u
You are most welcome
Hello Frank,
I work in TV production and I need to solve a problem. Namely, I use an Nvidia graphics card in Mosaic mode with a resolution of 3840x1080. I need to introduce two HDMI inputs (each 1920x1080) from the computer into Blackmagic studio as two separate video inputs. But I also need two video outputs with two different signals from computer to the broadcast mixer. One would be used as an SDI output, and the other could be used as an auxiliary output. Am I right. Thanks
Just seeing your comment. I didn't quite understand the setup you are trying to achieve. Hope you got a solution, if not, feel free to reach out.
Hello sir i am from india i saw your video you gave good information
i live stream on youtube sometimes i live out of city from village then i have a lot of network problem due to network is not good the live stream goes on intermittently
make a video on this sir
Thank you Sharda for watching. Do note that you need a stable internet connection to be able to livestream seamlessly
@@KomuFrank How to get stable internet connection to stream stage program live
Buda uko juu
Asante man
Why you streaming at VMIX? You have Web Presenter! You can take master-signal from notebook (with graphics, all cameras and sounds) and send it to Web Presenter. And then Web Presenter will stream it with LAN-port.
Am using the older model of Web Presenter & not the new Web Presenter HD/Ultra(4K)
Thank you for this amazing video. I'm a member of my church media Team, I do projection and switching together, one of our camera is NTSC(Sony NX100) which our ATEM production studio 4k does not recognize, I think it was wrongly programmed because the second one (Sony NX100) is not NTSC. How do I get the Video mixer to see it. I know of scalers but any other options or connections?
Try and match all camera inputs to have the same settings. If you have 2 similar cameras they should both be recognized.
@@KomuFrank i know about that but this particular NTSC configured camera does not fit in any of the ATEM production studio 4k list
@@KomuFrank is there any device that can convert its signal to 1080p or something else that works with the ATEM production studio 4k?
Hi my atem HD pgm does not work, any refferals for repair I will appreciate..
Hello, for repairs you'll have to consult and send to their warehouse.
A question so the audio ports in the black magic Atem are only outlets and not input source for sound ? Or i can still use them to feed sound to the atem Direct from my mics
No, they are only XLR audio inputs and not outputs; and yes you can feed sound directly from mics or from a sound mixer.
For audio output you can use the headphone output located at the front of the Blackmagic Atem HD
@@KomuFrank how do i configure the audio once it gets to the atem from the mic ? I connected my mic and their was no sound in my sdi outpu
@@tobiasmanyi_esimbayachache6426 you should still receive audio, if not check the software. You may have to adjust the audio delay. Oh make sure it’s on mic and not line unless you’re coming from a mixer.
Can the black magic box,using Vmix as software be use for cromakey . Thanks.
You can do that using the ATEM Software Control
my switcher is not being recognied on my mac. I connected direct with ethernet port, doesnt recognize it.
How are you using the mac? Is it for the ATEM software control or for the livestream bit? Do share more so I can know how to assist you
@@KomuFrank my end goal is to live stream.... I have WIRECAST for Live streaming (better than OBS). But i dont know how to get my mac to recognize this switcher.
@@KomuFrank HELLO!
Hello, I can make this ATEM Studio TV HD connection (with two Sony cameras by SDI or HDMI NXCAM, NeoID by HMDI) with Multiview on an isolated monitor on a PC with vMIX (without the notebook as input) and without the Web Presenter to then take the PC with vMIX and send the extended screen to output to a 1x8 HDMI Splitter?
Yes, you can output your vMIX to a HDMI splitter for actions such as projection or showing the same feed on different screens. For Multiview to work you need a HDMI enabled TV or monitor.
Thank you for watching. Remember to subscribe🙂
Can you use the atem direct without the web presenter
Yes but you will need an input interface for your desktop, sth like a decklink (all outputs from the ATEM HD are SDI)
Hello! It has PiP function?
The Blackmagic ATEM HD doesn’t have a picture in picture function like other units. However, you can use the Down Stream Keyer with mask to simulate PiP.
Does the ATEM web presenter muli stream?
No. But there is a work around you can explore. For the new Web Presenter HD you can stream to one platform via ethernet (input settings on the app) and then send the feed via USB to your desktop live stream encoder and stream from there.
Question why aren’t you streaming off the web presenter? Doesn’t not use the full capacity of what it supposed to do which is to stream off the web presenter? Like for my set up we stream right off the presenter once we start it on Facebook
Wait…your using it as a Capture card pretty much right so The computer can recognize it as a camera input
@@JonathanMartinez-qn2kt yes I am
can I input more than camera had different sittings
You can input various cameras or even laptops using the HDMI inputs but ALL your devices' output settings need to be the same.
I don't know what the fucking web presenter's problem is, I got everything hooked up right but the presenter still shows a black screen instead of the input from the switcher. Any advice??
From which port is your output from the switcher?
@@KomuFrank Thank you for reaching out bro but I figured it out ^^
Vmix studio windows 7 broadcast in Internet TH-cam and all
yes it can
Hey brother can I get your contact
You can reach me on fwkomu@gmail.com
@@KomuFrank thank you
Hi my atem HD pgm does not work, any refferals for repair I will appreciate..
Repairs can only be handled by the Blackmagic team, see their website for more info: www.blackmagicdesign.com/support/