Is this first start up untuned and did you have to adjust the throttle body set screw to get it to idle or it started ran fine without any adjustments? Thanks just asking as im using a similar cam.
Its a 6 speed ls1 with sloppy stage two cam from elgin 228/230 on a 112 lsa 585/585,317 heads that have been decked 25 thousands and ported from katech performance in Detroit its has ls7 lifters,ls7 timing chain,trunion rocker swap,50lb injectors,behive valve springs 600",full bolt on's with no cats,rear o2 sensors turned off,z06/truck maf w/ Chris1313 ram air/ftp 100mm lid,ported TB,stock Ls6 intake manifold and im probably leaving somethings out and I will be doin dyno and tune real soon its just been running like a scalding dog on the street tune me and my buddy have on it and I need to get my 3.90 gears install first.
Ls1 228/230 on a 112 lsa 317 heads ported and decked 25 thousand,behive springs, pushrod,lifter,timing chain,oil pump,fuel pump,trunion kit for the rockers and a lot more 😆 It is a manual
@@ssman3452 what springs? Got the same cam in my LM7 with .020 decked 706 heads and gen 4 flat tops. I bought some elgin springs but got em and they say .560 lift but the sucker on the phone said they'll work?
Me and my buddy just put a street tune on it with hp tuners but I use calibrate speed and performance for tune and dyno just haven't been able to get in touch with him lately
Don't no what your talking bout this was the first start up after motor build it was untuned after the tune my oil stays dead on and have had zero issues with this cam run great.
I dont no what country you was living in for 4 years he built everthing back up from the shit shows before him. Are economy was better than its ever been jobs where everywhere,he built are depleted military back to a super power and he wasn't just passing out money to people to just sit there lazy ass's at the house or dropping off large amounts of money and weapons to are enemies. bidin is ruining are kids future. America needs a busy man and a man with a set of balls not a weak ass old man who is nothing but a puppet and is runing are country im sorry im a Christian and I will never support baby killing or just plain out evil good always wins and it will end the end God bless all.
![[UNCUT] บอสพอล แผลงฤทธิ์ บอสพระ-นักร้อง ก. โดนแฉยับ! I คนดังนั่งเคลียร์ I 21 ต.ค. 67](http://i.ytimg.com/vi/XKf6HeftoPI/mqdefault.jpg)
It’s always us country folks that build our cool cars ourselves. Country way!
T-Town getting it done!!! Love my city....
Sounds great! Make a noticeable improvement?
Why is the car white smoking like that mine doing the same thing after cam swap
Because they have to be tune after the swap.
Is this first start up untuned and did you have to adjust the throttle body set screw to get it to idle or it started ran fine without any adjustments? Thanks just asking as im using a similar cam.
That's first start up untuned and no adjustments to throttle body I have ported throttle body
@@ssman3452 Is yours 6 speed or auto if so stock converter? What other mods and did you have it tuned or dyno tuned?
Its a 6 speed ls1 with sloppy stage two cam from elgin 228/230 on a 112 lsa 585/585,317 heads that have been decked 25 thousands and ported from katech performance in Detroit its has ls7 lifters,ls7 timing chain,trunion rocker swap,50lb injectors,behive valve springs 600",full bolt on's with no cats,rear o2 sensors turned off,z06/truck maf w/ Chris1313 ram air/ftp 100mm lid,ported TB,stock Ls6 intake manifold and im probably leaving somethings out and I will be doin dyno and tune real soon its just been running like a scalding dog on the street tune me and my buddy have on it and I need to get my 3.90 gears install first.
Stock set up ?? Did u change the rods an rockers an lifters ? Manual or auto stock converter ? Askin because I'm tryin to do this same thing today
Ls1 228/230 on a 112 lsa 317 heads ported and decked 25 thousand,behive springs, pushrod,lifter,timing chain,oil pump,fuel pump,trunion kit for the rockers and a lot more 😆 It is a manual
No short cut on my build
New stock length push rods? New stock lifters?
@@sagemata5756 I am running aftermarket pushrods 3.375 but my heads have also been deck 25 thousands and I have new ls7 lifter.
@@ssman3452 what springs? Got the same cam in my LM7 with .020 decked 706 heads and gen 4 flat tops. I bought some elgin springs but got em and they say .560 lift but the sucker on the phone said they'll work?
Who did you use to do the tune on it, if you don't mind me asking
Me and my buddy just put a street tune on it with hp tuners but I use calibrate speed and performance for tune and dyno just haven't been able to get in touch with him lately
Im slapping this cam in my 6.0 here soon, it's going in my 01 Camaro SS
Its a proving cam you get the best of both low end and top comes in at I believe around 2200 up to 5800 rpm
He’s got the oil burner 3000 cam…
Don't no what your talking bout this was the first start up after motor build it was untuned after the tune my oil stays dead on and have had zero issues with this cam run great.
Big cam.
What’s the exhaust setup
Pacesetter longtube mid pipe and b&b catback
Roll Tide
Hope you’ve washed that back window by now lmao
I keep it on to remind people what true American power is my American muscle car runs strong just like are country did when he was president.
@@ssman3452 bruh the country was down the shitter for 4 years straight but yeah sure
I dont no what country you was living in for 4 years he built everthing back up from the shit shows before him. Are economy was better than its ever been jobs where everywhere,he built are depleted military back to a super power and he wasn't just passing out money to people to just sit there lazy ass's at the house or dropping off large amounts of money and weapons to are enemies. bidin is ruining are kids future.
America needs a busy man and a man with a set of balls not a weak ass old man who is nothing but a puppet and is runing are country im sorry im a Christian and I will never support baby killing or just plain out evil good always wins and it will end the end God bless all.
@@ssman3452 holy cringe just take the L
@@ssman3452 actually he did give out money during COVId
Needs a tune bad