I have the same dual CPUs but with ASRock EP2C612 WS. I must say your R15 score is higher than mine because of 2 reasons: I haven't changed the BIOS for allcore turbo clocking, 2- I am running it from a remote desktop setting. Otherwise it is a beast. I think I will enjoy it for a while. My motherboard takes max RAM speed 2133mhz sadly (128gb). What about your RAM ?
Godt at se det performer! Har lige købt Dual Xeon E5 2690 v3 selv til at bygge et homelab til bioinformatik. Havde bestilt nogle E7'er indtil jeg opdagede at man ikke kunne få standalone motherboard til dem :-(
Fedt 😄 det er en super god platform👍 Jeg har også selv kigget på E7, men samme problem med motherboards. Derudover er der ofte højere frekvens på E5 platformen så man også kan bruge computeren til mere single core afhængige ting👍
´¿ Thank you, the DDR6 video card worked for me in the other PCI-E since it is only 1 processor turned off several times. I wanted to ask him where he got the bios file and how do I use the programmer, the processor I have is ES-2620v4 2.1 GHZ you can with that ? Thank you
Hi there ¿ The z10pa-d8 board to put an 8 gig rx 5500 video card apart from the 24-pin power connector of the board that works like this, when I go to connect the video card I connect the 8-pin 12 Volt A and B or not And I also turn off the jumper on the VGA board so that the card works for me.? Thank you
Please make a video how to Unlock this Motherboard Z10pa! Please help. Thank you! After searching a lot I can't see any thread any topic make tutorial about this mainboard and X99 Supermicro. Thank you!
@@CMM-hn8yr Hello Sir! Can I have a contact with u please. Just do the same mod bios like this video th-cam.com/video/n70kVysFM3E/w-d-xo.html and then use AFUDOS 3.05.04 this version to restore bios right? Thanks sir again.
@@CMM-hn8yr Hi Sir! Sorry for bothering u! Can u please teach me how to mod this mainboard bios? Thanks. I can't find a fully thread how to mod. Thanks again.
i made it myself. with uefitool to remove microcode. you need v3x2 with minus 80mv vcore aswell. I would only do it after extencive research online. also you NEED the eprom burner to do this.
i needed to reply
ihave dell t5810
ram 32 2133 ghz
processor e2690v3 turbo max on
3.1 ghz !!
how to be 3.492 ????
what i need to be 3.492 ???
I have the same dual CPUs but with ASRock EP2C612 WS. I must say your R15 score is higher than mine because of 2 reasons: I haven't changed the BIOS for allcore turbo clocking, 2- I am running it from a remote desktop setting. Otherwise it is a beast. I think I will enjoy it for a while. My motherboard takes max RAM speed 2133mhz sadly (128gb). What about your RAM ?
2133mhz 128gb. Xeon E5 2690 v3 cant go any higher. No dual or quad xeno e5 v3 can do higher ram speed.
@@lasseberg7317 Thank you for the info!! I didn't know that! (I Have the same Mainboard as you)
Godt at se det performer! Har lige købt Dual Xeon E5 2690 v3 selv til at bygge et homelab til bioinformatik. Havde bestilt nogle E7'er indtil jeg opdagede at man ikke kunne få standalone motherboard til dem :-(
Fedt 😄 det er en super god platform👍 Jeg har også selv kigget på E7, men samme problem med motherboards. Derudover er der ofte højere frekvens på E5 platformen så man også kan bruge computeren til mere single core afhængige ting👍
@@lasseberg7317 Cool! Må jeg spørge hvad du har gjort mht. køling?
@@lorenzweb 2 x Artic freezer 33. og et kabinet med godt airflow. - omkring 73 grader ved prime 95
What a type of ram u use for that motherboard?
´¿ Thank you, the DDR6 video card worked for me in the other PCI-E since it is only 1 processor turned off several times.
I wanted to ask him where he got the bios file and how do I use the programmer, the processor I have is ES-2620v4 2.1 GHZ
you can with that
?
Thank you
Hi there
¿ The z10pa-d8 board to put an 8 gig rx 5500 video card apart from the 24-pin power connector of the board that works like this, when I go to connect the video card I connect the 8-pin 12 Volt A and B or not And I also turn off the jumper on the VGA board so that the card works for me.?
Thank you
I have never worked with a rx 5500. does it work with other gpu´s with 12 volt connector plugged in? have you tried another pcie port?
Looks very good! What about your gpu?
Its a rtx 2070👍
Sir! Please help how to unlock this motherboard. Please share file bios
Please make a video how to Unlock this Motherboard Z10pa!
Please help. Thank you!
After searching a lot I can't see any thread any topic make tutorial about this mainboard and X99 Supermicro.
Thank you!
AFUDOS 3.05.04 works on this Motherboard, you dont need a Programmer. 3.05.04 is the only working Version
@@CMM-hn8yr Hello Sir! Can I have a contact with u please.
Just do the same mod bios like this video
th-cam.com/video/n70kVysFM3E/w-d-xo.html
and then use AFUDOS 3.05.04 this version to restore bios right?
Thanks sir again.
@@CMM-hn8yr Hi Sir. U there? Please help
@@sweetheart2672 Hello, with the steps that I gave you previously, you should not have any problem.
What part are you stuck on?
@@CMM-hn8yr Hi Sir! Sorry for bothering u! Can u please teach me how to mod this mainboard bios? Thanks. I can't find a fully thread how to mod. Thanks again.
gpu ?
RTX 2070.
Hello. Can you help with link with bios for Turbo boost for all cores ?
i made it myself. with uefitool to remove microcode. you need v3x2 with minus 80mv vcore aswell. I would only do it after extencive research online. also you NEED the eprom burner to do this.
@@lasseberg7317 Give me please link for bios file, cos i don't understand how to remove microcode and use v3x2 with minus 80mv vcore.
@@andrywhite3877 I dont have a link. I can upload it to you if you have a one drive.
Why you can't upload it to Dropbox, Mega, google drive for example and send a link ?
ok. i will do that if you can tell me what command to use to add a uefi driver i bios.