Printing Multi-Color PLA- CF With Fixdry Double NT-1 Filament Dryer
ฝัง
- เผยแพร่เมื่อ 10 ก.พ. 2024
- Drying 2 rolls of filament at once to make multi-color PLA-CF prints easier. Fixdry Double NT-1.
use: Lendfree
bit.ly/42AEU04
patreon.com/LenDizzlePrintz
Support the channel and buy a shirt:
www.lendizzleprintz.com/
Maker Space Stuff:
Sewing/ Cutting Mat- amzn.to/3najNkv
Steel Rulers- amzn.to/3K89Ddn
Digital Caliper- amzn.to/40CyF9I
Nut Drivers- amzn.to/3LVb2oP
Hex driver- amzn.to/3zcuJkg
Tekton Screwdriver set- amzn.to/3FNfhiv
Sharpie - amzn.to/3ZUg4Fv
Filament I recommend:
eSUN PLA+ Filament - amzn.to/41YCnMl
Paramount PLA - amzn.to/3JuyfLI
Video Equipment:
Canon EOS R7 - amzn.to/40iHuFQ
Canon M50 - amzn.to/3ZUJKmx
Canon EOS R7 RF-S18-150mm F3.5-6.3 - amzn.to/3T3BKx3
Canon RF50mm F1.8 STM - amzn.to/3T0Shlj
Canon EF-S 24mm - amzn.to/3FwTtHR
SmallRig Cage Canon EOS R7 - amzn.to/3JNLAQA
SmallRig Cage Canon M50 - amzn.to/3LxfXMH
Label Maker:
Brother P-Touch Cube Smartphone Label Maker - amzn.to/3l3Q5gD
Refill - amzn.to/3JLUdvc
Lights:
Octagon Softbox - amzn.to/3YQB7Iw
As an Amazon Associate, I earn from qualifying purchases. - วิทยาศาสตร์และเทคโนโลยี
That's a really clean print! I'm excited to try this with my students! Cool vid!
Nice
PLA CF isn’t terribly hygroscopic. I keep PLACF with my PLA. When you get to other CFs (Nylon CF, ABS CF) you really need to dry and print from dry box
Do you need to manually rotate the spool once in awhile to avoid concentrated hot spots?
Worst thing about this dryer is that they don’t make an AU model. Poor Australian/NZ people
It looks like a nice product otherwise