An update on KAMP- better installation, new feature!
ฝัง
- เผยแพร่เมื่อ 11 มิ.ย. 2024
- We're taking another look at Klipper Adaptive Meshing and Purging, a utility the lets your Klipper based printer get more accurate bed meshes as well as purge near the print for less chance of filament ooze. There's been a major rewrite that should makes it easier to update, and a new smart park feature that puts the toolhead where it needs to be just before you print. Let's check it out! You can get all the info at github.com/kyleisah/Klipper-A...
00:00 Introduction
01:54 Note for upgraders
02:14 Adding to Moonraker’s update manager
02:41 Configuring the software
05:58 Configuring print_start.cfg
06:28 KAMP in action - วิทยาศาสตร์และเทคโนโลยี
This is awesome as I just installed klipper on a Pi4B from BTT so learning about KAMP and other options to add on to help. Much appreciated
3:36 Thank you for mentioning to remove the space, that got me stuck for a good min
We need more videos like this!!!! Awesome. Great work
Thank you!
3:41 If it wasn't for this comment, I don't think I would have figured out the cause of my constant errors EVERYTIME I rebooted after installing this. All because of that damn space! 🤬 THANK YOU!!!!!!
Wow this was easy to add to Fluidd and really speeds up the mesh leveling process. I was unaware of this add-in. Thanks for the video!
Glad it was helpful!
I would like to thank you for you taking the time to make these videos they do help
Thank you!
Pretty sure what he meant to say was "delete the space" because you have, in fact, uncommented the space, which creates a syntax error...
Took me a few minutes to figure out what he was saying there but it's working now, thanks!
good explanation. especially around if upgrading from KAMP V1 to V2
Nice video, just an FYI in case you didn't know, you can use CTRL-/ to add or remove comments with their default 1 space on the web interface.
Thank you. this video got it up and running for me. I am probing 3x3 but i want to increase it to 5x5, which fields do i adjust do you know?
Great video Thanks!
Backups of Allen's config files for his V0.2, V2.4, and Micron are available at github.com/allenrowand
Thank you for pointing out that you need to uncomment the spaces in the KAMP Settings cfg. I had been trying to get KAMP running for a little over a month and that was the one detail I missed
Glad it helped!
@West3D Printing, Do you happen to have your klipper files somewhere for the public to have a look? My files are a MESS and would love to check yours out to see what can be done to "clean house" per se. Great vid and thanks for the info!
If you don't hear back, you might take a look at the LDO Voron configs! They're very well organized and commented which can be helpful to get your own cfg in order.
Link to the files is above, thanks for the kind words!
Hi. Is it possible to use the line_purge function without adaptive meshing? No matter what I do, it always does the purge in the centre of my bed. I was hoping to use it without adaptive mesh on my Super Racer. Thanks 😊
Thanks for the video. I get a message that the config can't be added because there is no such file or directory. I've been searching but I can't find what my directory is as I'm assuming that is the issue. The KAMP config is not currently listed for me. FYI using a Sonic Pad.
Did you figure this out? I have the same issue and I think it’s because there’s no bed mesh code for me
Great video, will this work on a Sonic Pad?
If it's running Klipper and you can add macros it should work.
This video showed nothing like how do i ssh into my klipper device? Im sooo confused
What interface do you use to access your Klipper installation? Fluidd, Mainsail, Octoprint? You should be able to edit the .CFG files directly from your web browser using any of those.
Some people use putty to do the SSH stuff when using raspberry pi. Build it basement shows how to use it in his 1st klipper video. You will need your pi IP address. I feel like he kind of just said stuff but didn't say how on a lot of things. I haven't gotten it to work yet. The cut and paste into SSH is where i'm stuck too. Fatal unable to access. Fail to make symbolic link etc. When I get into printer cfg none of the includes are there.
Second the request to see your config files please!
Backups of Allen's config files for his V0.2, V2.4, and Micron are available at github.com/allenrowand
Can you help me out setup KAMP via teamviwer ? I can pay. I think i did something wrong. Im first time user to klipper.
We can't but you can reach out to the author at the Github page- he's very helpful