@@dmc_autos does it keep the black longer lasting than the spray treatment alternative do you know? I'd be too scared of melting something I think to risk it!!
@ThePtb1980 it's hard to say hugely, from my experience it keeps it black for ages, It seems very hard to melt it as such, you just have to hold it far enough away and keep the torch moving, best to practice. it's cheaper than any liquids and in my opinion, alot more permanent. Things like back to black, they look and seem good, on a car, you have to re-apply it once a month as the colour fades back to the grayish colour. doing it with heat seems to last
🤣🤣 yeah she looks bloody amazing! to be honest, I know quite alot of people and those sane people know people, quite a few bikes are through word of mouth, and the rest it's the results of facebook marketplace 😂 Cheers for your support pal!
You could probably have just taken the top yoke off to get at the steering head bearings. But it needed a thorough clean under the fairing anyway! Once the yoke used off, Dremel a slot in tte hear of the sheer bolts and use a manual impact driver.
@@dmc_autos don’t bother with a screw driver - go straight for the impact driver and give it a good hard smack! The bolts holding the ignition switch on are normally not that tight. By the way, think it is a Zadi ignition switch. They are pretty easy to strip down and remove the lock barrel to make it easy to but a key from the lock.
Nice trick for the black plastics, never knew that was a thing!
yeah! It's one of those things I saw on ticktock but yk what, it does actually work! not sure how or why but yeah 🤣
@@dmc_autos does it keep the black longer lasting than the spray treatment alternative do you know? I'd be too scared of melting something I think to risk it!!
@ThePtb1980 it's hard to say hugely, from my experience it keeps it black for ages, It seems very hard to melt it as such, you just have to hold it far enough away and keep the torch moving, best to practice. it's cheaper than any liquids and in my opinion, alot more permanent. Things like back to black, they look and seem good, on a car, you have to re-apply it once a month as the colour fades back to the grayish colour. doing it with heat seems to last
@@dmc_autos cheers man good to know. Keep up the good work 👍
Chain looks like it could do with replacing, good job on the rest
Indeed it did, have swapped it since filming ready for new owner!
wooowee....what a lovely suprise
🤣🤣
Nice looking little bike 👌🏻 and what a bargain. Where do you find your bikes at prices like that? 😂 Enjoying your channel m8.
🤣🤣 yeah she looks bloody amazing! to be honest, I know quite alot of people and those sane people know people, quite a few bikes are through word of mouth, and the rest it's the results of facebook marketplace 😂 Cheers for your support pal!
You could probably have just taken the top yoke off to get at the steering head bearings. But it needed a thorough clean under the fairing anyway! Once the yoke used off, Dremel a slot in tte hear of the sheer bolts and use a manual impact driver.
to be honest, I did have a go dremmiling slots into them but when I applied a bit of pressure half the head just snapped off... sooo welder it was 🤣🤣
@@dmc_autos don’t bother with a screw driver - go straight for the impact driver and give it a good hard smack!
The bolts holding the ignition switch on are normally not that tight.
By the way, think it is a Zadi ignition switch. They are pretty easy to strip down and remove the lock barrel to make it easy to but a key from the lock.
Dirt ain't cheap no more, have you seen the prices per ton in recent years
🤣🤣
🏍👍👍👍👍
😉
Sportbike, not "sportsbike". It's not a bike for sports...LoL! 😊
🤣🤣 I couldn't decide which to do.... did Google it and honda day sports bike...😂
Super sport, not sportbike... LoL :D
okay fair play man 😂😂
Is that 125 Cc? If so my pit bike is bigger 😂
yeah 🤣🤣 shush then man
Yeah but you are only allowed to ride in the pit lane, since it's a pit bike, he can ride on the full track!
🤣🤣🤣
I'll see your pit bike a raise you my 600RR lets see if we can get a Liter Bro in here
imagine 😂
Next upload, you fixing all the mot fails?
there aren't any bud, forks are good, tires both good, no cracks, chain, sprockets all good etc, brakes are like new, all lights work... no mot fails?