JOIN OUR EXCLUSIVE PROJECT SUPPORT GROUP With WEEKLY GROUP CALLS For Coaching On Farm Equipment Repair, Welding & Metal Fabrication! Its An Affordable, And Easy Skill-Building Program With Only A 1 Month Minimum! Learn About The Program Here: th-cam.com/video/LbxxZ4l9LnU/w-d-xo.html Join The Project Support Group Here: www.patreon.com/OWFA/membership
The return of the chuckster lol long time fan since who cares. I like you and Steve working and learning. Just wish he was in this vid Have a good night
In case you're getting any ideas, Glyptal is meant to be applied to a SPOTLESS surface. If the metal isn't scrubbed absolutely free of all oil, it could flake off (tomorrow or 3 years from now) and cause an immediate and massive clog in the oiling system. Goodbye, Motor.
I just picked up a L175 of my own. A lot of damaged sheet metal. I am in need of a front rim. One of mine has a hole in the rim. I am located in South Texas. I am also have issues with the rate of fall valve/knob moving. Great content please keep it up. If you have any info on a rim that would be great. I also have narrow rear tires on the rear. I have a set of nice wide turf tires on a 3005 John Deere I would like to put on the kubota so wider rear rims would be nice to find as well. Thanks.
that round piece you took off is a adjustment for the hydraulics and their is a bunch of these tractors around you should not have a problem finding what you need for sure.
I wanted to Thank you for this video. I have a Yanmar 2210 and my 3 point stopped lifting. I'm gunna have to do the same thing. But I'm hoping for no rust lol 😇😁😇
I would look at fitting an external ram to the three point links and do away with the internal one. Be cheaper and easier than trying to bore out out that cylinder and make a new piston or replacing the whole unit with a new one.
Hello Chucky, Love the videos. You should try this new lubricant, cleaner and penetrating oil. Called Superzilla, it is expensive I bought 1 leter for around $40.00. I got it for my skid steer loader, the quick attach system has rusted and I have not been able to use it for over ten years.I am going to try it out when the weather here in Michigan gets warmer. Stay safe.
MORE: For those who like the things which TH-cam doesnt, join us on a free mobile app called Telegram, under "Tractor Hoarders Group Chat", in case we get cancelled on here! Best wishes! SOME OF MY FAVORITE TOOLS: KNIPEX German Made Pliers-Wrench: amzn.to/35fchvN OTC Slide-Hammer Kit: amzn.to/3p7mq4Q Carbide Burrs - An Affordable Set That’ll Last: amzn.to/2VsxTgH SUNGLASSES I WEAR - Quality at twice the price: amzn.to/2VegmbE Regular Safety Glasses that I Use: amzn.to/2ATXtEf Yes, these are affiliate links. Thanks for watching!!!
JOIN OUR EXCLUSIVE PROJECT SUPPORT GROUP With WEEKLY GROUP CALLS For Coaching On Farm Equipment Repair, Welding & Metal Fabrication! Its An Affordable, And Easy Skill-Building Program With Only A 1 Month Minimum!
Learn About The Program Here: th-cam.com/video/LbxxZ4l9LnU/w-d-xo.html
Join The Project Support Group Here: www.patreon.com/OWFA/membership
Mechanic Steve for the WIN!
@stephen cox's other channel tim Gentry needs help with a cam are you near NC trying to join convoy tomorrow morning
Who's that?
Titanic level rust - that was hilarious!
The return of the chuckster lol long time fan since who cares. I like you and Steve working and learning. Just wish he was in this vid Have a good night
He has a new channel now too
A repair manuel might be in order when they give that much trouble, lucky nothing broke I think 🤔
GREAT VIDEO! May I get your machinist info for that fabricated cylinder? In dire need of this replacement part.
In case you're getting any ideas, Glyptal is meant to be applied to a SPOTLESS surface. If the metal isn't scrubbed absolutely free of all oil, it could flake off (tomorrow or 3 years from now) and cause an immediate and massive clog in the oiling system. Goodbye, Motor.
I just picked up a L175 of my own. A lot of damaged sheet metal. I am in need of a front rim. One of mine has a hole in the rim. I am located in South Texas. I am also have issues with the rate of fall valve/knob moving. Great content please keep it up. If you have any info on a rim that would be great. I also have narrow rear tires on the rear. I have a set of nice wide turf tires on a 3005 John Deere I would like to put on the kubota so wider rear rims would be nice to find as well. Thanks.
that round piece you took off is a adjustment for the hydraulics and their is a bunch of these tractors around you should not have a problem finding what you need for sure.
good video
I wanted to Thank you for this video. I have a Yanmar 2210 and my 3 point stopped lifting. I'm gunna have to do the same thing. But I'm hoping for no rust lol
😇😁😇
Get the piston out and use a cylinder hone on the inside. Polish the piston. New o-rings. Like work as good as new again.
I would look at fitting an external ram to the three point links and do away with the internal one. Be cheaper and easier than trying to bore out out that cylinder and make a new piston or replacing the whole unit with a new one.
Think this was done a few years ago on your other channel
Hello Chucky,
Love the videos.
You should try this new lubricant, cleaner and penetrating oil. Called Superzilla, it is expensive I bought 1 leter for around $40.00. I got it for my skid steer loader, the quick attach system has rusted and I have not been able to use it for over ten years.I am going to try it out when the weather here in Michigan gets warmer.
Stay safe.
Hiya Lance
On this episode of tractor horders
MORE: For those who like the things which TH-cam doesnt, join us on a free mobile app called Telegram, under "Tractor Hoarders Group Chat", in case we get cancelled on here! Best wishes!
SOME OF MY FAVORITE TOOLS:
KNIPEX German Made Pliers-Wrench:
amzn.to/35fchvN
OTC Slide-Hammer Kit:
amzn.to/3p7mq4Q
Carbide Burrs - An Affordable Set That’ll Last:
amzn.to/2VsxTgH
SUNGLASSES I WEAR - Quality at twice the price:
amzn.to/2VegmbE
Regular Safety Glasses that I Use:
amzn.to/2ATXtEf
Yes, these are affiliate links. Thanks for watching!!!
It's called an Engine Hoist
Or a Gantry
@@darellsunderlin4670 Most everybody has a hoist. So doe's Chucky 2009
🌎🌞👍😊
Hello brothers and sisters
Great video, but no need for the 'serious' music - or even music at all.