I downloaded the BETA onto my PC removed the RCA's from the turntables. It was easy to set up and it works (currently) without any issues. Also, I just realized from your video that I forgot to change the settings from Turntable to CDJ's however, the Phase worked without any problems. Thanks for the content. Edit: I use a Dell Laptop, S9, PLX's
Using PC. Only issue may be operator error. I did not calibrate before testing so the BPMs were not aligned. The feel was spot on though. So whats interesting is that when I go to my audio tab in Serato, there's no option for CDs. I'm using the Numark Scratch.
After a year of owning the rane twelves, if I were to do it all over again, I would go the same route. They were more expensive up front but I’ve been using them for a year without issue and the phases are just now almost caught up. But no batteries to charge, no wireless signals to be interfered with, less cables and zero drift all make them a clear winner to me. I will say though, in a weird way, I miss my tone arms lol.
Maannnn this is so dope.... I just notice while using this I did not have to Change to CD in the settings.... and I love that small addition... I’m gonna test it on my stream! #ImATester
Hi CT... any idea why my sound (speaker output) is all messed up whenever i move the pitch on the technics? I am using a DJM S9, latest serato on a macOs Big Sur 11.7.6? When other djs use the same setup they dont get this issue. Only happen to me (laptop or serato) ... again, when dropping a song on any deck it plays fine, its only after manually changing the pitch on the Turntable pitch up or down that the sound comes out distorded/garbled. Thx!
My issue with my phase is that the sound cuts off everytime i go on my web browser. The equipment i use are a pair of Reloop 7000 turntables, an S9, a 2014 Macbook pro and A reloop usb stand hub. I connect the usb from the the mixer directly to the laptop, and everything else on the stand hub, my phase and 2 hard drives. I can go on my browser no problem when i use my needles, but the sound cuts off when i open the browser when im using Phase.its a bit frustrating because i wanna practice on phase while opening up Rob Swifts online courses
Did you notice a difference of feel going from having a control tone to HID mode because I’m not sold... the whole thing I loved about phase was it had a control tone just like needles. HID mode just makes it like the twelves or a controller yanno?
When I was playing around with it, it felt exactly the same except for no frustration of having the start point move. If you feel a difference, I'll bet you get used to it quickly.
Don't know if anybody mentioned it but there's a new feature where you can "double-tap" the phase remote itself to do the pitch correction without needing to open the phase program you just have to turn the feature on in the phase manager.
is there a way to achieve perfect sync in serato with these systems? because i was planning on using 4 rp8000mk2 in serato for techno sets with 4 decks, but i didn't factor in that the motor flutter still gets picked up by the software. if these run in HID it should be able to achieve perfect constant sync, no?
The calibration had an Error, but Phase said i am fully updated, i was rocking out earlier w/ RCA’s Still connected, but shortly....i will see What happens now thatcables are not connected to my DS9 mixer, ?..., but hey....i am excited myself Too......
I got a pair last year over the summer, and one of my devices were defective / not connecting. Customer service from the store I bought from was a mess, and I don't want to go through that again. I'm waiting on newer batches of their product to be made so I can feel more confident that it will work, especially after spending so much money on this product and then having something that doesn't even work.
Same. It would take a lot for me to purchase again... Glad it works for everyone else, but I would feel stupid spending that kind of cash again.... Only dj kit I've bought that flat out failed at what it was intended to do....
@@jjuninc77 I feel you man. Just be patient. I'm sure we'll be seeing a new Phase product very soon. This product has been on the market since 2018, and the company is depending on fixing the issues via online updates. They will soon run into issues that cannot be fixed via update, and they will need to release a new product for revenue again.
It was a good update. I got windows and transition was easy enough. I did have it freeze up on me two times while test scratching. But yes, after what, 3 years, this is the product they promised. So thanks serato!
Do you know if you still need a dvs supported controller when in HID mode? I'd really like to use my numark nv2 for mixer and channels 1&2, and then use phase in hid mode for channels 3&4
I had the same issue. You gotta go to phases website and download the phase manager update as well, so the remotes are up to date. If you still get “page not found” after that, you may want to re-instal the serato beta update again. That’s what happened to me and following these steps worked
I’m having effects issues. I’m using the numark scratch mixer with the turntables and a ddj xp2. Everything worked fine until I tried using the effects on the xp2. Then none of the effects worked.
Interesting. I don't have the xp2 but I do have the Denon HC1000, no effects but cue points, search function, loops all work. Is your xp2 shown in Serato in the fx tab?
This is one of the main reasons I went with all rane. We also do events that are 12+ hours long with lots of djs and phase makes it difficult to do the changeovers and keeping the batteries charged is difficult as well.
Ok sooooo...im still rockin my TTM 56S mixer...ya ya ya i know i know...OOOOLLLL SSKKKOO!! Will i still be able utilize this update and ONLY USB into my laptop and no RCA’s? Or because im still using an older mixer i will still need to use my RCA’s from Phase to mixer? If Terry or anyone can answer, be greatly appreciated!
@@ClevelandTerry thank you Terry, just to clarify though im not using a 57, im using a 56S...basically OLDER than the 57! The 57 yes i know only works with scratchLive. 56S though......still hope to utilize this update?
🎄Merry Christmas Everybody🎄 I know I'm late. But I just got my Phase for Christmas. Phase work for Big Sur. Keep spinning...🎶🔊🎤🎵🔊📀📀🔊🔊 ((Blessing be safe out there))
Great update. , On the PC side. There is a little sound issue when you backspin or slow down the sratch. The drift issue is almost gone which is a great deal. I did not experience any crazy "12" o'clock drift issues. On my windows 10 the searto is taking alot of resources to run. I will hand over the findings to Phase
I think you have to disable pitch n time for better “slow” scratches. I noticed with this enabled, my slow scratches just sound like regular play black for a split second. It’s weird, but if it’s enabled, give it a try and see if it improves. Also what is your deck+mixed set up?
@@ErickeverRB the problem went away the next day after this post. I don’t have the pitch n time when I scratch in Serato. I am using the S9 mixer . I am amazed how phase is able to do this truly cool concept
So, when is the "Cleveland Terry School of Scratch" opening up? Thanks for the review. Serato's improvements are encouraging, & encouraging me to get phase later on.
Hey I just downloaded Serato DJ Pro and a first time user coming from Virtual Dj. One of the reasons why I switch over is in hope to get my PHASE working properly instead of having $400 paper weights. The problem I’m having now is that the tracks are playing in doubles like a like an echo. Everything is calibrated and updated. Is it a setting or something I need to turn on or off?
Just fixed it I had to tighten the screws on the right decks spindle lock underneath the disc 🤦🏾♂️I can't stand the acrylic discs might have to drill some holes and do a vinyl mod as it feels so weird
Did you hear anything back? That’s the only thing stopping me from downloading Serato. I’m so used to VDj it might be hard to make the transition or finding things etc.
Does it make a difference if Serato is on a Mac or PC. Thinking about a this ASUS 15.6" ZenBook Duo UX581LV Touchscreen to be exclusive Serato software only and music; and wanted to know if there are any hiccups of running serato on a laptop pc like this? and what to be aware of?
CT did you have the same issues I'm having with Serato not recognizing your expansion packs after downloading the Beta version? I was at a loss as to why my Flip and Video wouldn't work so I just went back to the original version.
I DJ occasionally literally 4 times a year if that, im conflicted between RANE ONE ( for ease and convenience) but i have Phase and with HID I am now leaning towards the PIONEER S7 (because of the usb power and now HID mode) i currently have a traktor z2 so it would literally bring me back to Serato if i choose one or the other. Cleveland waiting on your review for S7 VS RANE 70!!!
@@DirtyCuttinScoundrel Yeah, I love gear, too. But: Me personally, I' d save that money. Or buy a budget Serato DJ Mixer. I own the Numark Scratch pretty much since release and it works great. Sub 500 bucks and worth every penny 😉!!!
Man I'm a big Rekordbox user, but Serato keep throwing these nice new features and kind of pulling me away. Waiting to see if Rekordbox will have this offline locker for beatsource.
Good News! I‘m very close on bying Phase. What‘s holding ne back is one issue, many user reported: getting different BPM‘s with the same song on two decks at 0% pitch. Is that still a thing or did firmware fix that?
I’ve used my Phase for almost a year now and I haven’t experienced this issue yet. But I think there are lots of updates that have fixed it for some users
Really cool to see you’re improving. Keep up the hard work. Kudos to Serato and Phase
Awesome! We have been waiting a long time!
Very informative great video keep up the great work.
I downloaded the BETA onto my PC removed the RCA's from the turntables. It was easy to set up and it works (currently) without any issues. Also, I just realized from your video that I forgot to change the settings from Turntable to CDJ's however, the Phase worked without any problems. Thanks for the content.
Edit: I use a Dell Laptop, S9, PLX's
Fresh. Thank you for doing the video. Might be time to check out phase again.
Using PC. Only issue may be operator error. I did not calibrate before testing so the BPMs were not aligned. The feel was spot on though.
So whats interesting is that when I go to my audio tab in Serato, there's no option for CDs. I'm using the Numark Scratch.
I can’t get my wireless dvs to come up. I have phase but I also wanna use my needles when phase on charger to keep playing. Please help.
After a year of owning the rane twelves, if I were to do it all over again, I would go the same route. They were more expensive up front but I’ve been using them for a year without issue and the phases are just now almost caught up. But no batteries to charge, no wireless signals to be interfered with, less cables and zero drift all make them a clear winner to me. I will say though, in a weird way, I miss my tone arms lol.
I get that tone arm thing.
@@ClevelandTerry So no more internal mode ? Meaning I can’t run one instant doubles on one turntable anymore ?
Been trying to find if hid mode works with vdj .. does anyone 🤔 have any information
Maannnn this is so dope.... I just notice while using this I did not have to Change to CD in the settings.... and I love that small addition... I’m gonna test it on my stream! #ImATester
Hi CT... any idea why my sound (speaker output) is all messed up whenever i move the pitch on the technics? I am using a DJM S9, latest serato on a macOs Big Sur 11.7.6? When other djs use the same setup they dont get this issue. Only happen to me (laptop or serato) ... again, when dropping a song on any deck it plays fine, its only after manually changing the pitch on the Turntable pitch up or down that the sound comes out distorded/garbled. Thx!
My issue with my phase is that the sound cuts off everytime i go on my web browser. The equipment i use are a pair of Reloop 7000 turntables, an S9, a 2014 Macbook pro and A reloop usb stand hub. I connect the usb from the the mixer directly to the laptop, and everything else on the stand hub, my phase and 2 hard drives. I can go on my browser no problem when i use my needles, but the sound cuts off when i open the browser when im using Phase.its a bit frustrating because i wanna practice on phase while opening up Rob Swifts online courses
That shouldn’t be happening. You may want to check the user forums
Did you notice a difference of feel going from having a control tone to HID mode because I’m not sold... the whole thing I loved about phase was it had a control tone just like needles. HID mode just makes it like the twelves or a controller yanno?
When I was playing around with it, it felt exactly the same except for no frustration of having the start point move. If you feel a difference, I'll bet you get used to it quickly.
Feels a lot better than it did. Can do super slow drags without issue too.
P
Don't know if anybody mentioned it but there's a new feature where you can "double-tap" the phase remote itself to do the pitch correction without needing to open the phase program you just have to turn the feature on in the phase manager.
Did you watch the video? 😀
@@ClevelandTerry did you re-upload because I swear I didn't see that part first time I watched lol
is there a way to achieve perfect sync in serato with these systems? because i was planning on using 4 rp8000mk2 in serato for techno sets with 4 decks, but i didn't factor in that the motor flutter still gets picked up by the software. if these run in HID it should be able to achieve perfect constant sync, no?
The calibration had an Error, but Phase said i am fully updated, i was rocking out earlier w/ RCA’s Still connected, but shortly....i will see What happens now thatcables are not connected to my DS9 mixer, ?..., but hey....i am excited myself Too......
you need to explain how it goes into the mixer then into the computer?? what how its only got 1 port on the back
Do you have USB ports on your mixer? Which one?
@@ClevelandTerry its the s9 my bad i still think everyones on those haha 🤣🤫
Ok then you’ll have to go directly into your computer. The S9 lacks any usb inputs.
Thanks for the info!
I got a pair last year over the summer, and one of my devices were defective / not connecting. Customer service from the store I bought from was a mess, and I don't want to go through that again. I'm waiting on newer batches of their product to be made so I can feel more confident that it will work, especially after spending so much money on this product and then having something that doesn't even work.
Same. It would take a lot for me to purchase again... Glad it works for everyone else, but I would feel stupid spending that kind of cash again.... Only dj kit I've bought that flat out failed at what it was intended to do....
@@jjuninc77 I feel you man. Just be patient. I'm sure we'll be seeing a new Phase product very soon. This product has been on the market since 2018, and the company is depending on fixing the issues via online updates. They will soon run into issues that cannot be fixed via update, and they will need to release a new product for revenue again.
Good Video Bro. I Just Updated Mine!
Thanks Terry
It was a good update. I got windows and transition was easy enough. I did have it freeze up on me two times while test scratching. But yes, after what, 3 years, this is the product they promised. So thanks serato!
Is it just me or you cant slow the record down using phase. Touching the plater or the record does not do it. Any help would be appreciated.
It’s just you. Your settings may be off. Sounds like you’re in internal mode
Hi CT, Thanks for your Vids !!! How come you can see the scope green circles. in this beta version there is no scope or green circles in HID mod.
Do you know if you still need a dvs supported controller when in HID mode? I'd really like to use my numark nv2 for mixer and channels 1&2, and then use phase in hid mode for channels 3&4
Yes still need a DVS
Can Phase be used with just two turntables and Serato DJ Pro without a mixer?
I don’t have the cdj/ turntable option in my audio tab. Also I have SL2 box. Do I connect usb to computer ? Because I did and it times out in 1 minute
Did you update the firmware? Once you do inter your absolute and relative mode you have wireless. Choose that
@@ClevelandTerry I finally got it thanks
I can't get this to work. I get Page Not Found when I press the expansions button. I tried everything.
I had the same issue. You gotta go to phases website and download the phase manager update as well, so the remotes are up to date. If you still get “page not found” after that, you may want to re-instal the serato beta update again. That’s what happened to me and following these steps worked
I’m having effects issues. I’m using the numark scratch mixer with the turntables and a ddj xp2. Everything worked fine until I tried using the effects on the xp2. Then none of the effects worked.
Interesting. I don't have the xp2 but I do have the Denon HC1000, no effects but cue points, search function, loops all work. Is your xp2 shown in Serato in the fx tab?
@@mike._.feliciano6782 it shows in the midi tab in settings. I didn’t have any problems with the most recent non beta serato update.
Awesome Work 💓
It’s works on windows fine I order it because of this video
Would of been handy to show how this is actually wired in. "It's just plugged in via the phase via the S11" So we need a USB A to USB A cable?
It’s the same way it’s always been wired in. Nothing has changed.
The Phase comes with the USB cable, just plug that into your laptop or if your mixer has a USB port, You can use that
How do you play back to back with someone? Do you now each have to have phase?
This is one of the main reasons I went with all rane. We also do events that are 12+ hours long with lots of djs and phase makes it difficult to do the changeovers and keeping the batteries charged is difficult as well.
Ok sooooo...im still rockin my TTM 56S mixer...ya ya ya i know i know...OOOOLLLL SSKKKOO!! Will i still be able utilize this update and ONLY USB into my laptop and no RCA’s? Or because im still using an older mixer i will still need to use my RCA’s from Phase to mixer? If Terry or anyone can answer, be greatly appreciated!
You can’t use the 57 with serato dj pro just you’ll still need rcas
@@ClevelandTerry thank you Terry, just to clarify though im not using a 57, im using a 56S...basically OLDER than the 57! The 57 yes i know only works with scratchLive. 56S though......still hope to utilize this update?
🎄Merry Christmas Everybody🎄
I know I'm late. But I just got my Phase for Christmas. Phase work for Big Sur.
Keep spinning...🎶🔊🎤🎵🔊📀📀🔊🔊
((Blessing be safe out there))
Great update. , On the PC side. There is a little sound issue when you backspin or slow down the sratch. The drift issue is almost gone which is a great deal. I did not experience any crazy "12" o'clock drift issues. On my windows 10 the searto is taking alot of resources to run. I will hand over the findings to Phase
I think you have to disable pitch n time for better “slow” scratches.
I noticed with this enabled, my slow scratches just sound like regular play black for a split second.
It’s weird, but if it’s enabled, give it a try and see if it improves.
Also what is your deck+mixed set up?
@@ErickeverRB the problem went away the next day after this post. I don’t have the pitch n time when I scratch in Serato. I am using the S9 mixer . I am amazed how phase is able to do this truly cool concept
So, when is the "Cleveland Terry School of Scratch" opening up? Thanks for the review. Serato's improvements are encouraging, & encouraging me to get phase later on.
Do you set the radio booster for on or off in phase?
Bro what slipmats u using ur spinning and beat juggling so freely???
Hey I just downloaded Serato DJ Pro and a first time user coming from Virtual Dj. One of the reasons why I switch over is in hope to get my PHASE working properly instead of having $400 paper weights. The problem I’m having now is that the tracks are playing in doubles like a like an echo. Everything is calibrated and updated. Is it a setting or something I need to turn on or off?
So will Phase work with any DJ Mixer? ie Numark Scratch
My Rane 12s MKII still drift this beta was supposed to fix it 🤦🏾♂️ should of gone with phase... Nice video bro 👌🏾👊🏾👊🏾
You tried to recalibrate the Rane 12? You tried to change the latency in Serato?
@@ORIGINALDJZERO have done the recalibration changed the latency to 2ms
Just fixed it I had to tighten the screws on the right decks spindle lock underneath the disc 🤦🏾♂️I can't stand the acrylic discs might have to drill some holes and do a vinyl mod as it feels so weird
@@noopz27 after ot before I mentioned it to ya?
Your phase is directly connected to your S11, will that work with 2 Laptops connected usb to your Mixer?
Phase work on Rane 70 USB hub ??
I had to add one of those usb power chords. Super cheap but that solved my issue.
My phase works in my rane 70 hub, no issues
So, without a Serato "approved" piece of hardware this plug-and-play feature won't work??
I ask Virtual dj if it will support this feature but they have not responded to me yet did u here anything on that ? Always good video's salute
Did you hear anything back? That’s the only thing stopping me from downloading Serato. I’m so used to VDj it might be hard to make the transition or finding things etc.
Does it make a difference if Serato is on a Mac or PC. Thinking about a this ASUS 15.6" ZenBook Duo UX581LV Touchscreen to be exclusive Serato software only and music; and wanted to know if there are any hiccups of running serato on a laptop pc like this? and what to be aware of?
I can’t speak on the asus but I’m currently testing the xmg and it’s been great.
Ok virtual dj just responded to me and no it does not work yet but it should in future update they said. so to be patient they told me
CT did you have the same issues I'm having with Serato not recognizing your expansion packs after downloading the Beta version?
I was at a loss as to why my Flip and Video wouldn't work so I just went back to the original version.
It’s a beta...I wouldn’t worry until the final version comes out.
Do you need the DVS add on?
You do not. You need a mixer with Serato or one of the SL boxes (2,3,4)
Did you try it with VDJ? Does the performance still stand the same with it?
Currently only works with serato. VDJ coming soon.
@@ClevelandTerry aww damn ok
I DJ occasionally literally 4 times a year if that, im conflicted between RANE ONE ( for ease and convenience) but i have Phase and with HID I am now leaning towards the PIONEER S7 (because of the usb power and now HID mode) i currently have a traktor z2 so it would literally bring me back to Serato if i choose one or the other. Cleveland waiting on your review for S7 VS RANE 70!!!
Well, this might be off topic but why would you need any of those 2 devices If you DJ 4 times a year 😄?!?! Keep your Z2 and call it a day.
@@MakingMadBeats
Lmao.. I was thinking the same
I love DJ TECH!
@@DirtyCuttinScoundrel Yeah, I love gear, too. But: Me personally, I' d save that money. Or buy a budget Serato DJ Mixer. I own the Numark Scratch pretty much since release and it works great. Sub 500 bucks and worth every penny 😉!!!
When you're testing shit... do you use a separate computer than you work/event computer?
what notebook do you use? inch / year / specs?
I9 MacBook Pro 16..
Man I'm a big Rekordbox user, but Serato keep throwing these nice new features and kind of pulling me away. Waiting to see if Rekordbox will have this offline locker for beatsource.
Good News!
I‘m very close on bying Phase. What‘s holding ne back is one issue, many user reported: getting different BPM‘s with the same song on two decks at 0% pitch.
Is that still a thing or did firmware fix that?
I’ve used my Phase for almost a year now and I haven’t experienced this issue yet. But I think there are lots of updates that have fixed it for some users
@@Am-in
Thx for your feedback. I think i just order a unit and see how it performs. It‘s a fascinating product for sure
It's now easier to calibrate while using... Just put your pitch at zero and double tap the remote while it's spinning
@@UONeal
Cool, sounds promising. Thx!
Did you get them and what’s your thoughts?
This phase update is 🔥!
Totally off topic, but that's a dope Nirvana Tee.