Adding the cast unit and a set of TBR Comp-2 shorty 2 into 1 turnouts to my street bob 114. Tuning it with a dynojet pv-3b. Hoping for really good things.
Anytime you are tweaking the fuel, air or exhaust on a bike you should really consider getting a tuner or having it professional dialed in. Small changes can have larger consequences in the long run. Ride Safe. - Pat
@@RevZilla my Harley dealership is about 200 miles away. Can i install the air cleaner and still ride up there to get it dialed in? Because i know Harley will charge me an arm and a leg to install something i can easily do.
Great question! When you are upgrading your bike's exhaust and intake, you almost always want to make sure that you are adjusting your air/fuel ratio using a fuel management system. I would highly recommend reading through this article: www.revzilla.com/common-tread/fuel-management-101 A common question we get is "Will I need to remap my bike for this product?" Here are a few general rules to go by as far as when you will need to use a fuel management system and when you will not. If the only modification you are making is using a slip-on muffler, we typically say you will not have to use a fuel management system. The exception to this rule is if the slip-on also deletes the catalytic converter. At this point, you would want to use a fuel management system. If you are going to upgrade to a full exhaust system, delete the catalytic converter, or use a higher flow air cleaner, we always recommend going to a fuel management system at this point. Using a fuel management system will help your bike perform better, run smoother, and also protect your bike from issues like overheating due to running too lean. -Zack
Hi , i also have v&h short shots on my dyna with the k&n 90 air charger , i bought a fp3 pack and its so easy to instal i would recommend you do it to...
Unfortunately no, this isn't available for the Low Rider S. There are similar options from other brands, but honestly your stock intake on the S model is already a high flow intake. -DrewZilla *www.revzilla.com/motorcycle/vance-hines-vo2-90-air-intake-for-harley-2008-2017 *www.revzilla.com/motorcycle/arlen-ness-deep-cut-monster-sucker-air-cleaner-kit-for-harley-2008-2017 *www.revzilla.com/motorcycle/arlen-ness-beveled-monster-sucker-air-cleaner-kit-for-harley-2008-2017 *www.revzilla.com/motorcycle/performance-machine-fastair-air-cleaner-for-harley-2008-2017 *www.revzilla.com/motorcycle/arlen-ness-10-gauge-monster-sucker-air-cleaner-kit-for-harley-2008-2017 *www.revzilla.com/motorcycle/arlen-ness-naked-monster-sucker-air-cleaner-kit-for-harley-2008-2017
You can use the part finder on our website at www.revzilla.com/motorcycle-parts to check and see all of the option we offer for your Dyna. If you have any other questions or concerns, please reach out to our Gear Geeks at 877.792.9455 or cs@revzilla.com. Ride safe, Pat
Yes, we do ship to Brazil. Shipping cost depends on size, weight, and value. Some brands may not be shipped to certain destinations due to manufacturer restrictions. If you have selected an item that cannot be shipped internationally, we will inform you in the checkout process on our site. Please see our International Orders Page (www.revzilla.com/international-orders) for more details. -DrewZilla
No, this is not made for the Sportster, only for Big Twins. Take a look at some similar air intakes that do fit Sportsters. -DrewZilla *www.revzilla.com/motorcycle/arlen-ness-naked-monster-sucker-air-cleaner-kit-for-harley-sportster-1991-2017 *www.revzilla.com/motorcycle/vance-hines-vo2-90-air-intake-for-harley-sportster-2004-2017 *www.revzilla.com/motorcycle/arlen-ness-beveled-monster-sucker-air-cleaner-kit-for-harley-sportster-1991-2017 *www.revzilla.com/motorcycle/arlen-ness-deep-cut-monster-sucker-air-cleaner-kit-for-harley-sportster-1991-2017 *www.revzilla.com/motorcycle/performance-machine-fastair-air-cleaner-for-harley-sportster-1991-2017 *www.revzilla.com/motorcycle/two-brothers-moto-intake-air-cleaner-for-harley-sportster-1994-2018 *www.revzilla.com/motorcycle/arlen-ness-10-gauge-monster-sucker-air-cleaner-kit-for-harley-sportster-1991-2017
![[Live] : ONE 169 วันนี้!! "อนาโตลี vs อูมาร์"](http://i.ytimg.com/vi/IK3YZVWuFJg/mqdefault.jpg)
![[Full] 4 ต่อ 4 Celebrity EP.922 | 10 พ.ย. 67 | one31](http://i.ytimg.com/vi/zmV5HRIxIBI/mqdefault.jpg)
Adding the cast unit and a set of TBR Comp-2 shorty 2 into 1 turnouts to my street bob 114. Tuning it with a dynojet pv-3b. Hoping for really good things.
I'm thinking about buying one of these for my Harley Davidson I'm worried that riding the bike in rain will it get water in my motor
Some models come with a rain sock that prevents water in your engine.
2014 heritage does it fit
hey stupid question, but can i add this air charger to a non harley bike? and if so do i need anything else to be added with it?
What's the CFM on these K&N air cleaners ??
What if I do just a upgraded air intake do I need to do a tune. Stock pipes
Anytime you are tweaking the fuel, air or exhaust on a bike you should really consider getting a tuner or having it professional dialed in. Small changes can have larger consequences in the long run. Ride Safe. - Pat
@@RevZilla my Harley dealership is about 200 miles away. Can i install the air cleaner and still ride up there to get it dialed in? Because i know Harley will charge me an arm and a leg to install something i can easily do.
Do I need remap if just air filter installed
Great question!
When you are upgrading your bike's exhaust and intake, you almost always want to make sure that you are adjusting your air/fuel ratio using a fuel management system. I would highly recommend reading through this article:
www.revzilla.com/common-tread/fuel-management-101
A common question we get is "Will I need to remap my bike for this product?" Here are a few general rules to go by as far as when you will need to use a fuel management system and when you will not.
If the only modification you are making is using a slip-on muffler, we typically say you will not have to use a fuel management system. The exception to this rule is if the slip-on also deletes the catalytic converter. At this point, you would want to use a fuel management system.
If you are going to upgrade to a full exhaust system, delete the catalytic converter, or use a higher flow air cleaner, we always recommend going to a fuel management system at this point. Using a fuel management system will help your bike perform better, run smoother, and also protect your bike from issues like overheating due to running too lean.
-Zack
Does addding the K&N filter element on a screaming eagle air intake make any noticable difference?
You probably won't notice a big difference if you already have the Screamin' Eagle intake. -DrewZilla
hey awesome video one question i have v&h straight shots hs slip ons if i add the air filter do i need to get the fp3 or it fine without the fp3
Yes, if you add an air filter, you will need a fuel tuner such as the FP3. -DrewZilla
thanks for replying
Hi , i also have v&h short shots on my dyna with the k&n 90 air charger , i bought a fp3 pack and its so easy to instal i would recommend you do it to...
Is it possible to get this for my 2016 Harley fxdls? If so part number please!
Unfortunately no, this isn't available for the Low Rider S. There are similar options from other brands, but honestly your stock intake on the S model is already a high flow intake. -DrewZilla
*www.revzilla.com/motorcycle/vance-hines-vo2-90-air-intake-for-harley-2008-2017
*www.revzilla.com/motorcycle/arlen-ness-deep-cut-monster-sucker-air-cleaner-kit-for-harley-2008-2017
*www.revzilla.com/motorcycle/arlen-ness-beveled-monster-sucker-air-cleaner-kit-for-harley-2008-2017
*www.revzilla.com/motorcycle/performance-machine-fastair-air-cleaner-for-harley-2008-2017
*www.revzilla.com/motorcycle/arlen-ness-10-gauge-monster-sucker-air-cleaner-kit-for-harley-2008-2017
*www.revzilla.com/motorcycle/arlen-ness-naked-monster-sucker-air-cleaner-kit-for-harley-2008-2017
Can I get this on a dyna fatbob 2012?
You can use the part finder on our website at www.revzilla.com/motorcycle-parts to check and see all of the option we offer for your Dyna. If you have any other questions or concerns, please reach out to our Gear Geeks at 877.792.9455 or cs@revzilla.com. Ride safe, Pat
Do you send your products to Brazil?
Yes, we do ship to Brazil. Shipping cost depends on size, weight, and value. Some brands may not be shipped to certain destinations due to manufacturer restrictions. If you have selected an item that cannot be shipped internationally, we will inform you in the checkout process on our site. Please see our International Orders Page (www.revzilla.com/international-orders) for more details. -DrewZilla
Will it fit on an 2006-2019 iron 883?
No, this is not made for the Sportster, only for Big Twins. Take a look at some similar air intakes that do fit Sportsters. -DrewZilla
*www.revzilla.com/motorcycle/arlen-ness-naked-monster-sucker-air-cleaner-kit-for-harley-sportster-1991-2017
*www.revzilla.com/motorcycle/vance-hines-vo2-90-air-intake-for-harley-sportster-2004-2017
*www.revzilla.com/motorcycle/arlen-ness-beveled-monster-sucker-air-cleaner-kit-for-harley-sportster-1991-2017
*www.revzilla.com/motorcycle/arlen-ness-deep-cut-monster-sucker-air-cleaner-kit-for-harley-sportster-1991-2017
*www.revzilla.com/motorcycle/performance-machine-fastair-air-cleaner-for-harley-sportster-1991-2017
*www.revzilla.com/motorcycle/two-brothers-moto-intake-air-cleaner-for-harley-sportster-1994-2018
*www.revzilla.com/motorcycle/arlen-ness-10-gauge-monster-sucker-air-cleaner-kit-for-harley-sportster-1991-2017
Would love to have one but sorry...Not spending $299-$399 for a damn air cleaner....
It's worth it! Woke up my FLHC! Vastly improved throttle response and made it much more agile on the low end!
Worth every penny!
blah blah blah blah blah....