I agree..keep it up, love your calming tone, doesnt make me so nervous..lol...step by step projects, in my opinion, is the best way to learn, waiting for your next video!!
Thanks watched all 3 videos I liked them all keep it up… I’m waiting on my laser to be delivered so watching these really helps because I’m not even a beginner 😂
Same concept, but I use a sheet of construction paper held down to the honeycomb with little magnets. Then I just throw it away and use a new sheet next time.
So on LightBurn, you used the deer file and on the printer, it came out the moose. Nice trick! I have a 20w Longer laser, this is my first time watching your video, wanted to see how the branches were printed because I am having a hard time getting the right power on 4mm MDF, but....
Hey, hi, I do like your videos. I have a question: What settings do you use to cut through wood because I'm having trouble? I'm going through like 11 passes.. I have a text to d121 laser, or maybe you have a video to explain the settings if you don't mind helping me
Us3d a 300x300mm basswood Cut out the shapes and Setup a Jig.. It's easy to Jig any reproduced product. Save the file with tool layers Then align once when starting and produce alm day and never need to re adjust..
Go to window at top line of light burn. Check box by laser to open laser menu. Click stop. Try to push home & see if it goes back to home. Hope this helps
How do you actually align the laser in the centre of the design, on the square? You have positioned the square on the right on your table, but in Lightburn the design is on the left?
Can the wifi password be changed? For that matter, can you get it to connect as a station rather than an access point so that it could be attached to my home net?
@@Laser.101 I cut on inches not mm so the number different . I did play with it for several hours and was able to kind figure out a sweet spot for numbers and materials .
I do absolute coordinates and then home the laser to the bottom left corner. I may do a video on that, it seems some people struggle with laser location
You have a new subscriber! I love how your videos are short and to the point, other videos I see are 30-40 minutes with unnecessary filler.
I agree..keep it up, love your calming tone, doesnt make me so nervous..lol...step by step projects, in my opinion, is the best way to learn, waiting for your next video!!
Great tutorial! This helped me visualize a way to do something with fabric once I get my laser. Thanks!
Thanks for the video. How do you clean black burn marks later?
Thanks for the tip...and works great with my laser. Less waste for sure. Merry Christmas!
Thanks watched all 3 videos I liked them all keep it up… I’m waiting on my laser to be delivered so watching these really helps because I’m not even a beginner 😂
Hey at least you'll know what you're looking at when it arrives!
Awesome trick! ❤ thank you
Same concept, but I use a sheet of construction paper held down to the honeycomb with little magnets. Then I just throw it away and use a new sheet next time.
Excellent, just learning to use my laser and this is really helpul
Nice! Love the craft and hope to see more coming.
So on LightBurn, you used the deer file and on the printer, it came out the moose. Nice trick! I have a 20w Longer laser, this is my first time watching your video, wanted to see how the branches were printed because I am having a hard time getting the right power on 4mm MDF, but....
Thanks, will definitely remember this for next time!
Great tip.Thank You!
smart trick, i am surprised though for not useing honeycomb support under the wood and air assist to avoid the burn under and on the edges...
Honeycomb and air assist are in the mail! Should be here by Friday
Pomocne informacje. Dziękuję i pozdrawiam z Polski!
Thanks for the tip.
What a genius idea！It helps a lot to save my wood,thanks.
Great tutorial! Good idea.
Hey, hi, I do like your videos. I have a question: What settings do you use to cut through wood because I'm having trouble? I'm going through like 11 passes.. I have a text to d121 laser, or maybe you have a video to explain the settings if you don't mind helping me
Love the video but the link is for the 3D Christmas tree card. Can you post the files for the ones on the video. Thank you.
Thanks for letting me know. I'll check that!
I've updated the link
@@Laser.101 Thank you and have a merry Christmas.
Great info, thank you.
This is genius!
Us3d a 300x300mm basswood Cut out the shapes and Setup a Jig.. It's easy to Jig any reproduced product. Save the file with tool layers Then align once when starting and produce alm day and never need to re adjust..
My laser always says it's busy in lighburn however it works perfectly with the grill software. Plus help I'm new n I have no idea what to do.
Go to window at top line of light burn. Check box by laser to open laser menu. Click stop. Try to push home & see if it goes back to home. Hope this helps
How do you actually align the laser in the centre of the design, on the square? You have positioned the square on the right on your table, but in Lightburn the design is on the left?
You have to set the home position on the laser, I was thinking about doing a video on that
So when buying a piece of wood, just measure it and add the dimensions to the software to make sure the image fits ?
Pretty much!
THANK YOU
Can the wifi password be changed? For that matter, can you get it to connect as a station rather than an access point so that it could be attached to my home net?
I honestly have never bothered with the WiFi. I just bought a laptop specifically for using with my lasers
Pretty trick.. Thanks...
Duh, that was easy. Was wondering what the best way was when I first played with my engraver yesterday.
My longer won’t cut through at all even with 5 passes at 100 power. Speeds at 11.4 what’s wrong? Longer ray5 10watt also
I set my speed to 300mm per minute for cutting. When you say 11.4 is that mm per second?
@@Laser.101 I cut on inches not mm so the number different . I did play with it for several hours and was able to kind figure out a sweet spot for numbers and materials .
i try this but everytime my machine back in home position, the frame position will not be align
👍🏼👍🏼👍🏼👍🏼👍🏼😎
Ditto same files used with Christmas tree NOT from this video.
Can you try it now and let me know? Should be updated
Currious.......where did you set your laser to start from ..........? current position
I do absolute coordinates and then home the laser to the bottom left corner. I may do a video on that, it seems some people struggle with laser location