Duuuude, so much appreciation for your vid. I lifted the front of our machine and found that the nut had backed off completely. This allowed the large belt pulley to slide half way off the shaft. The pulley actually chewed a perfect circle into the pulley cover. I popped the pulley back on and tightened the nut.....bam, the washer works again. Thanks again!!
Wow your video ia still appreciated!!!! I was just about to buy a new washer. This is the best video on the problem because it actually worked without doing any labor 😆
Thank you so much for your video!! My washing machine was doing the same exact noise, except for the rinse cycle, that sounded the same as the wash. Nonetheless my husband followed your instructions and Ta da!!! Worked like a charm!
i have this same problem started about 2 weeks ago..ill check the main bolt to the main drive system ty.. i have had my washer for 6 years and this is a first for this machine.
Watching this video and then reading how to fix the problem, probably saved us a couple of hundred dollars (at least). Thank you, thank you, thank you!!!!!!!
I just purchased this washing machine from a classified ad , I am surprised at how noisy it is. So I came to youtube and appreciate your video. I'll have to have my dad take a look at the belt/pulley's to make sure they are tight.
Thanks again for posting this. Mine was making the same noise. I went underneath and saw that the pulley/belt were rubbing up against the cover. I tightened up the center nut, reseated the belt, and sure enough, it's quiet as it was when new. Thanks!
You are most welcome. I have also noticed that whenever I have a heavy load of laundry such as towels, jeans, and/or Blankets, the belt loosens up again. So try to turn the dial on the heavy load before washing these items. Glad it helped.
Thanks for the tip. Some moron said i would have to replace the machine on angies list. Thank goodness i found your vid. Took 2 minutes to fix. THANK YOU👍👍👍😁
I wanted to say thank you for the information. to update as to the grinding from my Machine, it was the belt that shifted down due to wear and stretching. it was the original belt. the pulley was tight.
If your washing machine is making these noise. Follow the steps below. Look underneath the washing machine and check the belt and the pulley. Make sure it is in its place and tighten the screw on top of the bigger pulley. My washing machine made a loud grinding noise in the wash cycle and clicking noise in the rinse cycle. When I fixed the belt and tighten the nut it was like new. Hope this helps!
I know man! I searched the description, comments, nothing. I have the same washer very similar issue. Per the comments looks like I have to go under and check the belt lol well no shit.
use something called Locktite on the nut. It is a glue like liquid that will keep the nut from loosening. You only need a small drop. It can be picked up from any hardware store.
Okay so I'm glad everybody else can see what he was doing but I sure couldn't. There was no point of reference to start off with... your hand literally covered the dial the whole time😬. I'm sure this would have been an awesome video if I could have just seen what you were doing
Maria Gonzalez No sé mucho español, pero he copiado y pegado mi comentario original en Google translate. Espero que todavía tenga sentido ayudarle a resolver su problema. Si su lavadora está haciendo estos ruidos. Siga los pasos a continuación. Mire debajo de la lavadora y compruebe la correa y la polea. Asegúrese de que está en su lugar y apriete el tornillo en la parte superior de la polea más grande. Mi lavadora hizo un fuerte ruido de molienda en el ciclo de lavado y haciendo clic en el ruido en el ciclo de enjuague. Cuando fijé el cinturón y apreté la tuerca era como nuevo. ¡Espero que esto ayude!
This is what happens when you have China make these machines they all suck I used to love listening to the good old fashioned American made washing machines now they all suck I'm in the market after my Maytag finally gave up the ghost I'm literally discussed this shit all started in 2011 in Washington to force all these company's to go (( High efficiency)) . This is what also happens when Government gets involved I have read review after review and not many people are happy with all these manufacturers we have no choice . And the sounds are awful like this iiiiiint iiiiiint iiiiiint iiiiiiint like a fucking electric sea saw ..!!!! We need Donald J Trump so we can MAKE our own shit again we have really lost our way as Americans no more American built pride just beer
Ain’t that the truth. I have a Maytag I bought bran new over 20 years ago and it’s still working perfectly. I put it out in my pool house and wash dog bedding and rags in it. I just bought a new Maytag and I’ve had the repair men out 3 times and it’s only 8 mouths old. Every time they come out they try to convince me the damn noise i hear is normal. I’m about ready to stick this washer up somebody’s ass. I’m very unsatisfied. Maytag is all I’ve ever had and my mother also. You can’t buy anything worth a shit anymore. 😤😤😤😤😤😤
Great that posts like this are available! My belt was rubbing too due to the nut being loose on my Whirlpool Cabrio. Thanks again!
Duuuude, so much appreciation for your vid. I lifted the front of our machine and found that the nut had backed off completely. This allowed the large belt pulley to slide half way off the shaft. The pulley actually chewed a perfect circle into the pulley cover. I popped the pulley back on and tightened the nut.....bam, the washer works again. Thanks again!!
OMG This video saved us hundreds of dollars! Fixed the awful sound during the wash cycle. Thank you so much for posting this!!
Wow your video ia still appreciated!!!! I was just about to buy a new washer. This is the best video on the problem because it actually worked without doing any labor 😆
Thank you so much for your video!! My washing machine was doing the same exact noise, except for the rinse cycle, that sounded the same as the wash. Nonetheless my husband followed your instructions and Ta da!!! Worked like a charm!
I swear you have only vid and best for this washer, That was my exact problem. I Thank you very very much ManX10. 💯💯
i have this same problem started about 2 weeks ago..ill check the main bolt to the main drive system ty.. i have had my washer for 6 years and this is a first for this machine.
Watching this video and then reading how to fix the problem, probably saved us a couple of hundred dollars (at least). Thank you, thank you, thank you!!!!!!!
Cherri McKine how did u fix
I just purchased this washing machine from a classified ad , I am surprised at how noisy it is. So I came to youtube and appreciate your video. I'll have to have my dad take a look at the belt/pulley's to make sure they are tight.
Jillian Hernandez glad it helped. 😉
My machine gets loud when it spin is that supposed to happen it's quiet when its washing
Thanks again for posting this. Mine was making the same noise.
I went underneath and saw that the pulley/belt were rubbing
up against the cover. I tightened up the center nut, reseated the belt,
and sure enough, it's quiet as it was when new.
Thanks!
You are most welcome. I have also noticed that whenever I have a heavy load of laundry such as towels, jeans, and/or Blankets, the belt loosens up again. So try to turn the dial on the heavy load before washing these items. Glad it helped.
How did you tighten it? When i try to tighten it, it just spins the same way in tightening it
Thanks for the tip. Some moron said i would have to replace the machine on angies list. Thank goodness i found your vid. Took 2 minutes to fix. THANK YOU👍👍👍😁
I wanted to say thank you for the information. to update as to the grinding from my Machine, it was the belt that shifted down due to wear and stretching. it was the original belt. the pulley was tight.
Thanks, our washers warranty had just expired when this problem occurred. I had it repaired and back in service in 15 minutes.
is there any video on how to fix the belt and what nut to tighten?
If your washing machine is making these noise. Follow the steps below. Look underneath the washing machine and check the belt and the pulley.
Make sure it is in its place and tighten the screw on top of the bigger pulley. My washing machine made a loud grinding noise in the wash cycle and clicking noise in the rinse cycle. When I fixed the belt and tighten the nut it was like new. Hope this helps!
Iram Burnett th-cam.com/video/k8gQHl7zERY/w-d-xo.html
Iram Burnett do you think the same principals apply?
How did you tighten it? Every time we try, it just spins in the same direction we are tightening it
Thanks, for the vid and info. As pretty as you are and smart too. Thanks
What is everyone talking about? What is the repair? Video ends and machine is still broken?
I know man! I searched the description, comments, nothing. I have the same washer very similar issue. Per the comments looks like I have to go under and check the belt lol well no shit.
Thanks for the tip!!
Thank you so much! I have a quiet washer again!
Glad I could help. 😀
Dawne Frain
which is the model?
sounds just like mine, I'm gonna give it a go and get back with my results
yes that was it . mine wasn't finger loose but about 1 turn loose. tightened and problem solved... took about 10 min ...thanx a bunch!!!!!!!!
whats does the pulley look like
what's wrong my washer no working push start and nothing
Did you ever find out what the problem was? My whirlpool is making the same noise and can't figure out the problem...
I have help for a lavator of tuentyone kg plis thanks
thanks
I tighten it and for one load of laundry my washer is perfect and then the following loads it does this all over again. Any ideas?
use something called Locktite on the nut. It is a glue like liquid that will keep the nut from loosening. You only need a small drop. It can be picked up from any hardware store.
My whirlpool just started doing that today, I'm a little upset. I'm upset what could it be?
LadyAC/DCAngus Young Fan1998 did u ever get it fixed ? What was it
1:48 When you try to start your car with a dead battery
Okay so I'm glad everybody else can see what he was doing but I sure couldn't. There was no point of reference to start off with... your hand literally covered the dial the whole time😬. I'm sure this would have been an awesome video if I could have just seen what you were doing
Mine says sense/ wash
help me please
tyrex agan
Mine just clicks like a clock
Call Sears repair! This sound is not normal!
my washing machine wont stop making sex noises
Mrs Puffs still making them noises
necesito que sea en español
Maria Gonzalez
No sé mucho español, pero he copiado y pegado mi comentario original en Google translate. Espero que todavía tenga sentido ayudarle a resolver su problema. Si su lavadora está haciendo estos ruidos. Siga los pasos a continuación. Mire debajo de la lavadora y compruebe la correa y la polea. Asegúrese de que está en su lugar y apriete el tornillo en la parte superior de la polea más grande. Mi lavadora hizo un fuerte ruido de molienda en el ciclo de lavado y haciendo clic en el ruido en el ciclo de enjuague. Cuando fijé el cinturón y apreté la tuerca era como nuevo. ¡Espero que esto ayude!
This is what happens when you have China make these machines they all suck I used to love listening to the good old fashioned American made washing machines now they all suck I'm in the market after my Maytag finally gave up the ghost I'm literally discussed this shit all started in 2011 in Washington to force all these company's to go (( High efficiency)) . This is what also happens when Government gets involved I have read review after review and not many people are happy with all these manufacturers we have no choice . And the sounds are awful like this iiiiiint iiiiiint iiiiiint iiiiiiint like a fucking electric sea saw ..!!!! We need Donald J Trump so we can MAKE our own shit again we have really lost our way as Americans no more American built pride just beer
Bu a set of Speed Queens, many video's on yt about them & customers love them.
Ain’t that the truth. I have a Maytag I bought bran new over 20 years ago and it’s still working perfectly.
I put it out in my pool house and wash dog bedding and rags in it.
I just bought a new Maytag and I’ve had the repair men out 3 times and it’s only 8 mouths old. Every time they come out they try to convince me the damn noise i hear is normal. I’m about ready to stick this washer up somebody’s ass.
I’m very unsatisfied. Maytag is all I’ve ever had and my mother also.
You can’t buy anything worth a shit anymore. 😤😤😤😤😤😤