Dorman Intake manifold is like installing a check engine light po 300-301 because the intake runners is shorter than factory and I know from experience on my 04 mustang GT automatic dark shadow gray the check engine light was on all the time even after I cleared the code it comes right back on so I had buy a factory intake and no more check engine light
My 2006 Crown Victoria had a brand new Dorfman intake on it when I bought it back in 2014 and it was already leaking at the front drivers side corner and back passenger side corner at the 2 year mark. They are junk and plus you lose 23HP. Now ford doesn't make the intakes anymore and most people are forced to use them. I bought a couple of the Ford intakes one to replace the Dorfman and I put the other one up for a spare down the road if I need it. They all have the problem with the heater hose nipple breaking off (even the Ford one).
I believe I read on another social media post Ford is going to release a date in the future for the factory intake again not sure if that’s the case not sure where that person got their information
@@nathanlopez5667 Dorman intakes will get you by in a pinch but they are really inferior I got so lucky in finding my OEM replacement Dormans are temporary fixes
I provided a link where I bought mine sadly those that have tried to order was unsuccessful the intakes seem to be not be manufactured by ford anymore 😢
Try this site it’s where I got mine. www.tascaparts.com/?gclid=CjwKCAiAxreqBhAxEiwAfGfndB5gvrdvMWkPtx9-7H2k7snZYC6v-M7CyjpcbcNCrzBtEqXoTMiIEBoCJk8QAvD_BwE
@@dongkapuyawn5107 just get a used one make sure it has the Ford stamp on it I got one from Marketplace off a Crown Vic that only had 40,000 MI expect to pay between 60 to about maybe 200 and remember to get new gasket set from Ford
@@AllPistonsGarage Dang, discontinued. Well, I'll start with replacing the gaskets and see if that helps. I also picked up a PI one from a junk yard. If the gasket doesn't work on my current one, I'll put in the used intake manifold with the new gaskets.
![[Part 1] รักมาไม่ทันตั้งตัว❤ หนุ่มสาวโสดถูกจับมาแต่งงานกันกะทันหัน แถมเธอยังเป็นหัวหน้าของเขา?!](http://i.ytimg.com/vi/y2pOOMkuFI0/mqdefault.jpg)
![โอ้เธอช่าง... - บี้เดอะสกา ft. ต๋อง เทวัญ (Prod. by ป๋าเพชร) [Official MV]](http://i.ytimg.com/vi/zbWhiLFmVL0/mqdefault.jpg)
Dorman Intake manifold is like installing a check engine light po 300-301 because the intake runners is shorter than factory and I know from experience on my 04 mustang GT automatic dark shadow gray the check engine light was on all the time even after I cleared the code it comes right back on so I had buy a factory intake and no more check engine light
Yes! Thanks for sharing the information and thanks so much for watching
I see there’s a block off for the coolant temp sensor, how’d you go about that?
My 2006 Crown Victoria had a brand new Dorfman intake on it when I bought it back in 2014 and it was already leaking at the front drivers side corner and back passenger side corner at the 2 year mark. They are junk and plus you lose 23HP. Now ford doesn't make the intakes anymore and most people are forced to use them. I bought a couple of the Ford intakes one to replace the Dorfman and I put the other one up for a spare down the road if I need it. They all have the problem with the heater hose nipple breaking off (even the Ford one).
Yes those Dormans are trash
This product is discontinued. I called Tasca and other Ford dealers and no one has it.
I believe I read on another social media post Ford is going to release a date in the future for the factory intake again not sure if that’s the case not sure where that person got their information
Is that updated one that's opr is supposed to be good
Not sure about updated it’s a factory OEM
@@AllPistonsGarage as long as it's close to the Ford Racing intake then I'll probably purchase it if it's the same old doorman then forget it
@@nathanlopez5667 Dorman intakes will get you by in a pinch but they are really inferior I got so lucky in finding my OEM replacement Dormans are temporary fixes
Where were you able to find a BRAND NEW OEM Ford intake manifold? Please provide a link. Thanks
I provided a link where I bought mine sadly those that have tried to order was unsuccessful the intakes seem to be not be manufactured by ford anymore 😢
I wanted to update you that Ford performance has a new updated intake available now from what I’m hearing M-9424-p46A
Any updated links for the manifold? I can’t find one anywhere…
Try this site it’s where I got mine.
www.tascaparts.com/?gclid=CjwKCAiAxreqBhAxEiwAfGfndB5gvrdvMWkPtx9-7H2k7snZYC6v-M7CyjpcbcNCrzBtEqXoTMiIEBoCJk8QAvD_BwE
This page is not working….i need to replace my IM on my ‘00GT. Dont see any FRPP PI IM anywhere
@@dongkapuyawn5107 just get a used one make sure it has the Ford stamp on it I got one from Marketplace off a Crown Vic that only had 40,000 MI expect to pay between 60 to about maybe 200 and remember to get new gasket set from Ford
It’s no longer available 🤦🏻♂️ I need one
Link to manifold please
www.tascaparts.com/oem-parts/ford-intake-manifold-1w7z9424ab?c=Zz1mdWVsLXN5c3RlbSZzPWludGFrZSZsPTEmbj1Bc3NlbWJsaWVzIFBhZ2UmYT1mb3JkJm89bXVzdGFuZyZ5PTIwMDQmdD1ndCZlPTQtNmwtdjgtZ2Fz
@@AllPistonsGarage Dang, discontinued. Well, I'll start with replacing the gaskets and see if that helps. I also picked up a PI one from a junk yard. If the gasket doesn't work on my current one, I'll put in the used intake manifold with the new gaskets.