Car Seat Foam Repairing - Car upholstery
ฝัง
- เผยแพร่เมื่อ 22 ธ.ค. 2024
- ✅Get our courses at: www.cechaflo.com
------------------------------------------------------------------------------------------------------------
Occasionally, it is difficult to find a new and original molded foam for a type of vehicle. That is why an upholsterer should resort to some tips to repair the foam in a way it would last for a prudent time.
Perhaps, this VW backrest molded foam is easy to find, but the customer wanted the repair, instead.
This foam was still at the point of being rescued by adding some protection/reinforcement on top and on its reverse side. Fortunately, I have had at hand high density scraps of foam. Otherwise, I would have had to go to a junkyard to find a still good seat foam.
I hope you find these tips useful!
Cesar
Hands made of gold, strong experience and skills
Genius at work.
Just trying to preserve the old upholstery school.
@@Cechaflo
If you come to travel in France here is a D291 for you....
I'll have to watch this again when I'm no longer homeless. Sleeping in my car ruined the bolsters and the frame jams into my sides now.
Better days are ahead bro. Stay focused. Look for opportunities. Give 110%. I too was “wayward” at one point. But with the same formula and that determination. In two months I was up. Haven’t looked back since. Now I’m up. I’m talking UP UP.
@@jonathanwilson356t❤❤❤❤❤❤❤❤❤❤❤❤❤😅
It's been a year now... I hope things have turned around for you..
Con che pasiensa conduce il suo lavoro e sempre un piacere seguire Lei grandissimo maestro. Complimenti veri e sinceri. Pietro da Palermo -Sicilia -ITALIA.
I just did something like this a month or so ago. I picked up an inexpensive garment/drapery steamer and used it to clean and 'plump up' the foam before I started reconstruction of it. It rejuvenates the foam, and as a bonus takes away a lot of that 'old car stink'! You can also use it to tighten up the leather (if you have it) afterwards as well.
A steamer has many uses... for pseudo 'dry-cleaning' of cloth upholstery or foam, try spraying on something like carpet cleaner, agitate it with a brush (if appropriate), then steam it and immediately suck the liquid out with a shop vac (use a slit attachment on the end of the hose). I've had very good luck with this method on everything from cloth upholstery, to baseball hats, to pizza delivery 'hot bags'. I use the Folex brand of spray carpet cleaner.
@@hxhdfjifzirstc894 Thanks for your tip!
I've seen that done before but didn't know you can use it on leather to tighten. Thanks for the great tip I will be using this along with what Cechaflo has shown in the repair presentation video. Again thanks DrFiero
Complimenti.per il tuo lavoro molto di precisione e passione 😊
Great video! This is how I repair foam in boat seats. At first I tried to cut the repair foam in the shape of the bad spot. This always showed threw the cover. Then I started doing it like you do and using a sander to shape it better. What kind of contact glue do you use? I can only get it to work good when I spray it on. It never sticks when brushed on.Thanks for all your videos
If your in the states. I use 3M "pliobond" from mcmaster
That looks great. Just what I was needing to fix a seat I have. Thought I wood need a new fome for it but it just need fixed like this. Thanks very mush for sharing. Big thumbs up 👍
Que bueno amigo me encanta sus tuctoriales Dios me lo bendiga
Jaror venezuela
Ese asiento de coche llevaba muchos kilómetros, pero después de la "cura de rejuvenecimiento" está preparado otra vez para rodar muchos años más! 👏👏👏😁😁😁
Asi es, se retapizo como nuevo el asiento. Con respecto a la espuma, lo mejor es reemplazar la pieza por una nueva o en mejor estado. El cliente no pudo conseguir una nueva pieza y me solicitó/ordenó bajo su propio riesgo que lo reparara lo mejor que pudiese quedar. Y si se reparó para que durara unos años mas.
@@Cechaflo El cliente manda! 👏👏 Hay ocasiones en que no se puede conseguir un repuesto o si se puede, sale muy caro, así que siempre se puede seguir la frase de las 3 Erres "Reduce, Reuse, Recycle" 😉😉
Asmr sounds. 🙂 Nice Video.👍
Greetings from Italy, thank you for sharing your work, can you tell us what material did you use to cover the seat?
It was done in fabric por the top panels and automotive vinyl for lateral pieces.
Thanks for doing this video. I've been hoping you would post a foam repair video. What is the black material used, trunk liner carpet?
Yes, it is trunk liner carpet.
Hola que buen trabajo , me sirve mucho este video ,ya que tengo alguno trabajo que realizar .gracias por enseñar .un gran saludo y siempre siguiendo sus videos
excelente presentacion maestro saludos desde piura peru
Hi good nigth congrautlations,,, nice to see your video,,, with all atention in this job in the seat,,, greetings and have a good time,,, your friend Oscar de Playa del Carmen Q R México,,,
Отличная работа!
I have to agree with the electric carving knife, but to each their own, and I'm glad you put something on the back of the foam
Only thing I'd do different is at the very beginning, steam the foam to bring it back to its original shape...
Nice job 👍
- I have a 2009 Toyota Land Cruiser 70, but there is a big hole in the seat cover. I wonder if I can find the same kind of cloth and from where
Hopefully you can find a similar fabric :
www.albrightssupply.com/products-search?qs=toyota+cloth
smsautofabrics.com/collections/cloth/products/toyota-land-cruiser-fj60-brown-stripe-cloth
midwestfabrics.com/fabric/automotive-upholstery-fabric/original-oem-detroit-number-fabrics/toyota-closeout-original-fabric.html
oemautofabric.com/product-tag/toyota/
tissens.com/en/contemporary-tuning-automotive-fabrics/13616-254100-genuine-automotive-fabric-Toyota-HiAce-collection.html
@@Cechaflo Thanks
What materials did you use to reinforce the back?
I used hard car trunk carpet.
th-cam.com/video/lXD9EWCC_eI/w-d-xo.htmlsi=7dL3yz7HG1hW605B&t=1086
@@Cechaflo What's the other stuff you used in the middle?
@@DaedaWerx It is the same old foamed bonded fabric the car seat had as central panels.
th-cam.com/video/lXD9EWCC_eI/w-d-xo.htmlsi=ZScmKAHDhB9dSKoY&t=1173
@@Cechaflo Thank you!
I live in California. Where can I buy the VL-2000 glue you are using?
This glue is only sold locally in Mexico.
If you are in the USA, you would need to get:
Landau contact cement: www.ebay.com/itm/254593470049 (most car trimmers use this glue in the USA. It is sprayable and brushable)
Petroni's glue:
www.ebay.com/itm/112451310211 (brushable) Greg uses the glue in this video:
th-cam.com/video/RLH8BY8a2to/w-d-xo.html
Weldwood contact cement:
www.ebay.com/p/7026733944 (brushable)
About yellow glues video:
th-cam.com/video/o2xeezdF8Ss/w-d-xo.html
Спасибо за отличное видео! Есть чему у вас поучиться.
Great! Thanks!
Nice neat work 👍
Aqui em São Paulo capital onde encontro um curso presencial?
I am located in Mexico but I have found some links for you.
bras.sp.senai.br/curso/95943/101/tapeceiro
th-cam.com/video/YLoK6Pdjj9g/w-d-xo.html
www.cursosdeformacao.com.br/cursos/industria-e-tecnologia/capotaria-automotiva
portalidea.com.br/curso-gratuito-capotaria-automotiva
hotmart.com/pt-br/marketplace/produtos/curso-completo-de-restauracao-e-personalizacao-de-bancos-de-couro/M25529965B
www.sistemafibra.org.br/senai/taguatinga/cursos-e-servicos/automotiva/346-tapeceiro-de-automoveis
@@Cechafloo curso de tapeçaria deles é móveis procuro tapeçaria automotivo
@@choraviola5701 My online upholstery courses are for cars. www.cechaflo.com/courses
Спасибо, МАСТЕР👍👍👍
Yep. That's exactly how I do it; except I typically use burlap on the back instead of trunkliner. It's cheaper and works well.
Si hubiese explicado los diferentes tipos de materiales quedaría ideal. Como las densidad de la gomaespuma, los revestimientos internos y externos, ect
Excellent, thanks
Good job
Thank you
Che tipo di tessuto hai usato per rinforzare la gommapiuma?
Carpet pieces and pieces of the old cover for the reverse side:
th-cam.com/video/lXD9EWCC_eI/w-d-xo.htmlsi=igY2r65cA5SbKR5L&t=1109
I used some pieces of headliner foam backed material to even the top surface:
th-cam.com/video/lXD9EWCC_eI/w-d-xo.htmlsi=_mxdA84Z5c3OYHRx&t=1452
@@Cechaflo Gentilissimo. Grazie per la celere risposta.
Como le hacen o de donde sacan esos asientos de auto viejo que salen impecables sin nada de oxido
A mi todos los que me toca tapizar estan que hierven de oxido hasta los mas nuevos llegan ya con oxido 😅😅😅😅
Super! Nice!
Od spodu gąbka dobrze wyklejona ale z góry gdzie jest brak gąbki powinno być wycięte wszystko na płasko następnie doklejona większa gąbka i tarką do styropianu uformowany kształt na nowo na wzór tego z drugiej strony.
nice video congratulations
What kind of glue is that?
A regular upholstery yellow glue (spreadable) th-cam.com/video/o2xeezdF8Ss/w-d-xo.html
Gracias por compartir
Muito bom vou fazer no meu
Bonjour quel grammes et quel matériel utilisez vous svp
I have used a hard density foam shoemakers use it for shoe's insoles.
It is much easier to get the same foam density from old seats in the junkyard (salvage cars)
th-cam.com/video/Wij_Xojk4s4/w-d-xo.htmlsi=lPV9bhigfnJSIoBP&t=89
I wish Cechaflo was my grandad !
IKR Teresa.
основния проблем за скъсване на дунапрена е меките пружини на седалката, тя прапада при сядане. Може с клещи да се изкривят пружините, ефекта е отличен. И лепене разбира се.
Troquei a espuma completa do Fiat uno fiz um vídeo aqui no meu canal
nice
And the glue is..?
th-cam.com/video/o2xeezdF8Ss/w-d-xo.html
مشاء الله تبارك الرحمن
Show!
когда из старухи молодуху делают красиво но только с наружи
Автору рекомендую посмотреть в сторону литьевых двухкомпонетных пенополиуретанов
Muito bom
Was ist das da fürn Bottig mit dem Kleber?
It is an upholstery yellow glue (brushable):th-cam.com/video/o2xeezdF8Ss/w-d-xo.html
Я паралон с железа не снимаю.
Старайтесь с железом делать.
😊😊😊😊😊
Casablanca
Semplice su questo tipo di auto quando non c'è lombari o airbag connettori particolari o cuciture con filo fragilizzato per air bag laterale o visto lavori con cuciture con filo normale poi in caso di urto la cucitura non si lacera. Americani
Спасибо, не знал, что так можно.
Time is money …quantity can be achieved faster …slowest upholster I’ve ever seen I’ve been around alot of upholstery spray adhesive and electric knife would be alot faster hack saw blades come in handy but seemed like the slowest process I’ve ever witnessed thanks for vid👍🏻
💪💪💪
Wow
The glue needs throwing away
The more dense the glue is the better, in case of old foam repairings. So, do not throw away your old glue cans.
Этот ремонт не надолго. Кустарно
😍🙄🙄😍😙😙↗️😙
🤦♂
That fix wont last why?
Because the bible says so: "never mend an old garment with a new patch" because the new patch will tear that old foam that its allmos disolving by itself"😇😇😇
Where did you learn how to butcher a foam repair like that? The foam is so broke down that’s why it’s all tore up. Buy a new back foam bun or cut the old foam off with an electric knife, not a damn hacksaw, use HR3070 foam. And ever heard of burlap? Use it.
What to do if the customer wanted it this way. Of course, I suggested buying a new foam which is cheap. He said no...just do the repairs as requested under my own risk.
Anyways, it has been 6 months and the repairing and reupholstery is still in good shape. I saw this customer yesterday and he is very happy with the job.
@@Cechaflo If they paid and they are happy as a kid in a candy store them mission accomplished.
@@midwestmafia8391 Thanks for your understanding!
Top parabéns belo trabalho. Vc e de qual país. Vc tem grupo de WhatsApp
I am located in Mexico.
@@Cechaflo aí sim eu sor brasileiro