⛐ Check out our Garage to see what tools we use and recommend: www.amazon.com/shop/worldmechanics ⛐ Subscribe and hit the notification bell by the subscribe button for new videos: th-cam.com/users/AutoRepairGuys ⛐ Our GoFundme Page: www.gofundme.com/auto-repair-guys
I have a question about my 3 2011 Hyundai Elantra 2.8L. Well I'm having issues with my Elantra dying after about 10 minutes of running. I've replaced the Fuel pump, fuel filter, coil packs, and spark plugs so far. And I'm trying to figure out how to do a Fuel Regulator now. But do you have any advice about what may be something wrong with my car?
I was able to replace the knock sensor in my 2013 Hyundai Accent without having to take off the intake valve. I went under the car and since it's so tight under there, it's best to use a 12mm wrench. I tried to do it with power tools and they could not fit.
Mechanics tell you they need to remove the intake manifold, but you don't need too. I agree with your comment. Easy replacement that will save you a lot of money.
Hi I have a 2013 Elantra GSL and my problem is that the check engine comes on already few times but last a short time and goes off. But before that happe nds is the idler goes up and down and if I turn a/c off and stops. Have you encounter this before. Thanks drop me a line
My mechanic replaced my knock sensor and took the car for a road test. The car was riding rough. They opened it back up and told me a piece of the aluminum gasket broke off and bent the valve. Does that make sense to you?
I have the same 2014 elantra engine, 1.8, it does not start I get code P0017 crankshaft correlation with cam shaft sensor, bank 1 sensor b ...... change the two and apart from the crankshaft and nothing, change chain and belt of time with tensioner and guides and nothing, buy a full gasoline pump and nothing, I do not know if I will see the map sensor or the oxygen sensors if they will have something to do with it, because it starts forcing and if it does it crawls through the throttle body, because I accelerate it and after a while it turns off, the vvt valves were also tested outside and they start are fine and the problem is the same .... help me
You never show where that last bolt under is, I cannot find it. I am a mobile tech with 20 years of experience and had to walk away from this job because after half an hour of looking, I don't see it.
⛐ Check out our Garage to see what tools we use and recommend:
www.amazon.com/shop/worldmechanics
⛐ Subscribe and hit the notification bell by the subscribe button for new videos: th-cam.com/users/AutoRepairGuys
⛐ Our GoFundme Page: www.gofundme.com/auto-repair-guys
I have a question about my 3
2011 Hyundai Elantra 2.8L. Well I'm having issues with my Elantra dying after about 10 minutes of running. I've replaced the Fuel pump, fuel filter, coil packs, and spark plugs so far. And I'm trying to figure out how to do a Fuel Regulator now. But do you have any advice about what may be something wrong with my car?
Where is crankshaft sensor on 2016 Hyundai elantra
great video. explained very well and clear video detail!
Thanks for all the videos on the Elantras
Thank you for your videos, keep the good work, greetings from México City.
I was able to replace the knock sensor in my 2013 Hyundai Accent without having to take off the intake valve. I went under the car and since it's so tight under there, it's best to use a 12mm wrench. I tried to do it with power tools and they could not fit.
Mechanics tell you they need to remove the intake manifold, but you don't need too. I agree with your comment. Easy replacement that will save you a lot of money.
How did you unplug it ?
After changing the knock sensor do you need obd tool for any settings?
Great video
Do video for veloster 2013 please.
same spot my guy
Hello,
Can you please make a video of how to replace hood open sensor on 2017 Hyundai Elantra??
What are those symptoms of bad knock sensor?
Thanks!!
Is it the same for the 4 Cylinder hyundai tiburon 2008
@autorepairguys do you know where the knock sensor is on a 2013 Hyundai Azera?
I have 2013 hyundai sonta i want to know if the knock sesor is located on same spot as elantra?
My 2012 Sonata is knocking after I had the camshaft sensor replaced ? Now OBD says cylinder 3 misfire several times. What you think ?
Can you do a video for a 2014 Kia Rio or a video describing where to look when we open the hood.
Just two women learning here lol
Does this work for a 2014 sonata? With the 2.4 engine ?
Hi I have a 2013 Elantra GSL and my problem is that the check engine comes on already few times but last a short time and goes off. But before that happe nds is the idler goes up and down and if I turn a/c off and stops. Have you encounter this before. Thanks drop me a line
Does this process work for a Hyundai Sonata
Good work
i have the same car and i hope mine don't need all he repairs you done to this one.
Could that location be for Hyundai tiburon 2008 ?
I'm still waiting for the MAF sensor video i have a 2013 elantra
guys make a video of how to replace and verify the transmission oil, please
Christian Méndez Salazar transmission oil changing is pain the head while it’s kinda confusing drain out about 80 or 90 % multiple times
is the knock sensor connected to the cam shaft sensor?
My mechanic replaced my knock sensor and took the car for a road test. The car was riding rough. They opened it back up and told me a piece of the aluminum gasket broke off and bent the valve. Does that make sense to you?
I have the same 2014 elantra engine, 1.8, it does not start I get code P0017 crankshaft correlation with cam shaft sensor, bank 1 sensor b ...... change the two and apart from the crankshaft and nothing, change chain and belt of time with tensioner and guides and nothing, buy a full gasoline pump and nothing, I do not know if I will see the map sensor or the oxygen sensors if they will have something to do with it, because it starts forcing and if it does it crawls through the throttle body, because I accelerate it and after a while it turns off, the vvt valves were also tested outside and they start are fine and the problem is the same .... help me
2016 Hyundai Tucson knock sensor??
You never show where that last bolt under is, I cannot find it. I am a mobile tech with 20 years of experience and had to walk away from this job because after half an hour of looking, I don't see it.
Can you tell me where is the knock sensor for accent 2014 and make it a video please and thank you very much
How remov the starter
Where is the Fuel Regulator located on the car?
change knock senser thats the only code coming up on my 2014 kia optima car still slow anything else that can be wrong with the car please help
Oh oh looks like you gonna need a new engine but you should get a free engine by dealership if you're still under warranty.
Couldn't you get to it from underneath?
no way is your car that clean...LOL
Why all this work ? Just remove alternator. Then undo nut with wrench ????
why not just jack the car up and do it from underneath
thanks guys and do you have any contact details like mobile and email please?
Sonata
You are doing to much work you can get it from under the car with out doing all this. Just saying
They put way too much junk on these new cars and they make a very difficult to get to the things you need to repair.
NO VERY COMPLICATED TO REMOVE? ARE YOU NUT? We have to remove a thousand parts to get that simple and stupid sensor.
Do you have to disconnect your battery also?