The truck sounds great with the boom tubes but give it a H pipe (or an X Pipe if your feeling fancy) to connect both banks and it'll sound even better!
Justin, I know you probably have been doing it for years but I recommend you and everyone that uses grinders often to pull the strings out of your hoodies, shit can get interesting real quick if that string gets in the grinder or anything that spins at high speed that ur face is kinda near
A trick I learned from the Aussies, and you may end up doing it with this exhaust, im not at the end of the video, but USE the exhaust to help direct, and spread the tire smoke. Some of those guys do two straight out the back, like Killa Bee and War Bird, im sure you got to get a good look at both of them. But, some of the tubes exit at a place under the truck but directed towards the tire, to push the smoke up and back. Just not too close cause it sets the tires on fire real quick. I dont even know why im telling you this, when you guys have access to actual Professional burnout guys, OH Burning Green, look at how his exhaust is setup like Warbirds. Its about being LOUD AND making a good smoke show. Good luck man! Oh, and a BIG F'N blown Big Block would do wonders for this little truck.😉 Dont fuck around with a N/A setup, go straight for a screw blown setup if you really wanna party.
Gotta have a x-pipe and create a point of where it bulges out and tapers back in no smaller than main pipe and then flows smoothly out through the end of the boom tube. It’ll sound insane if you do it this way and you can gain some horsepower doing it.
I think it should get what garret has in the drift Donny. Just a high revving naturally aspirated set up. Or the small block chevy, high revving on NITRO METHANE
You should totally do something super unique and run a pipe from each heade pipe out of a different location on the bed so it would have 8 individual exhaust pipes sticking out of the bed I know it sounds crazy and probably wouldn’t work but what if it did it would sound crazy noise coming from all directions
I don’t think the cause of the big blocks demise was bc of the blower. I’m positive the cause was your right foot and the environment the engine was being operated in. Mildly built engines with a roots blower do not like excessive throttle whacks. Aluminum rods, a strong blower crank, heavy wall wrist pins and good pistons, along with a strong top end, is a must for what you want to do with the blower.
With the bed rattling that bad y’all should consider sliding an old rubber floor mat or mud flap under the battery to avoid knocking the cells out of place.
One of the auto Parts Warehouses I worked for had a fleet of old Mazda mini trucks. They ran forever, but forever was a ways back. The original owner sold the company and the new owner invested in a fleet of Chevy S10’s. Decent trucks I guess, but they all had one glaring problem. In a bout 80 to 100 thousand miles the Doors started falling off. When these trucks are making deliveries and time costs you money you drive these trucks hard. So, depending on how many miles or how many times the doors had been opened, the drivers side door on this truck might have had a door hinge pin issue, and that might have cause it to fall off, breaking the window in the process.
When it comes time to doing a wrap on the mud truck let me know! We’ve been in the printing business for 30 plus years and are in Florida. Family owned business. Would love to work something out if you’re interested
The truck sounds great with the boom tubes but give it a H pipe (or an X Pipe if your feeling fancy) to connect both banks and it'll sound even better!
Def x pipe
Love the placement of the boomtubes exits. Need an X pipe. And maybe a flame thrower system for show.
Good spot on the back of the cones for a fuel injector, heh heh!
Another good show guys, Justin's one hell of a fabricator I can't wait to see that Square body crew cab long bed back on a channel
All those new HOA neighborhoods are going to love you
Builds are coming together.
The "Boom Tubes" sound awesome!
🇺🇸💪😎
Imagine if Justin and Tye got on a project together, thing would be a work of art!
Exhaust exit right in front of rear tyre on burnout cars are prone to tyre fires 🔥 🔥🔥can’t wait light her up
Very impressed! Very good high-quality work right there buddy.
Those square body s10s always was a great platform for speed and look great burning out. Sounds mean and makes me love chevy even more
He should put a balance pipe between the pipe
thats got some hell yeah brother in it, love it.
Just toss a lower gear in the drop transfer case and you'll be fine sometimes less power is more fun cuz you don't break stuff
This is gonna be cool as hell.
Justin... Not Justin Justin but the other Justin puts in so much work to get you guys stuff dialed!! 💪💪💪
JH and Justin, y'all rock! Love the boom tubes. Peace
At least they got thier "STEEL TOE CROCKS" on......
What a sweet product Yas done built there 👌 mint to see them in action
Sounded better with the straight piped.
ya should paint that Hood scoop Shop Green brighten that S10 up,
180 degree headers will make it sound insane!
Put the blower on that motor. Just adjust the pulley size so she don't make too much boost.
Justin, I know you probably have been doing it for years but I recommend you and everyone that uses grinders often to pull the strings out of your hoodies, shit can get interesting real quick if that string gets in the grinder or anything that spins at high speed that ur face is kinda near
Boom tubes are perfect.
Please build the 6.0 for the og mud truck! It’s was it deserves!!
He's going to be able to see a lot better now too, sounds great yeeyee
JH has the "content" I love ;)
Lmao😂😂 “I see he found the Ratchet” had me dying!
The ole composite toe crock is one of my all time favorite shop shoe😂
Good thing Justin had is safety crocs on
I love the s10! Great video guys.
Check the pinion bearing or the carrier bearing in the rear… one of them has moved. The tire to dead stop like that is a sign . Bad ass truck though.
Need to put a x pipe in it make them higher rpms sound better
A trick I learned from the Aussies, and you may end up doing it with this exhaust, im not at the end of the video, but USE the exhaust to help direct, and spread the tire smoke. Some of those guys do two straight out the back, like Killa Bee and War Bird, im sure you got to get a good look at both of them. But, some of the tubes exit at a place under the truck but directed towards the tire, to push the smoke up and back. Just not too close cause it sets the tires on fire real quick. I dont even know why im telling you this, when you guys have access to actual Professional burnout guys, OH Burning Green, look at how his exhaust is setup like Warbirds. Its about being LOUD AND making a good smoke show. Good luck man! Oh, and a BIG F'N blown Big Block would do wonders for this little truck.😉 Dont fuck around with a N/A setup, go straight for a screw blown setup if you really wanna party.
My god Justin clean that floor dude WOW !! Sorry i meant Jason !
Gotta have a x-pipe and create a point of where it bulges out and tapers back in no smaller than main pipe and then flows smoothly out through the end of the boom tube. It’ll sound insane if you do it this way and you can gain some horsepower doing it.
Bold move doing all that in crocs
I love it ! Think it's pretty damn good looking actually
Burnout kings will ride again
I think it should get what garret has in the drift Donny. Just a high revving naturally aspirated set up.
Or the small block chevy, high revving on NITRO METHANE
Dangit man the blower was bad ass I hope you find a 454 that will handle the blower because you are gonna need it
X pipe and make them shoot flames! Sounds great!
That looks toooo clean, bet the boys are gunna get a kick out of it too lol
Thats a great idea. Never thought of that
Run a bass piano string back and forth through it and then it will scream.
Justin truck is going to be ripping. Everyone else has their hands full.
Can you install a Holley sniper and wire in a nos kit that is controlled by the sniper? That would be cool on the s10
Damn that’s a gorgeous obs
Loving the channel Mr. JH
When you were filming the floor there I thought we were laughing at Justin's Crocs
Brother!!! 454 like a rock 💪🏻 Don’t kill it because it can go in the S-10 next 😂
GETCHA SOME YEE YEE!!
When ya boss says pop the tyres, u pop them dam tyres😂
Bro, I was laughing with you while he was backing out. I love it.😂
Even pipes and there suppose to have baffles or something inside the boom tubes thats just metal funnels
One rowdy lil S-10....
You should put flamethrowers in your exhaust I guess that's like a mix of diesel and gas that shoots flames really far while you're doing your burnout
You need a H pipe or X pipe for that to actually sound good.
Reinforce the wheel wells so the bed don't get tore up when the tires explode
Love the content man keep the videos comin
Great content thanks for sharing
If that ain't a friend thing to say, "he don't like burning out on those tires so I keep making him do em" I don't know what is. LOL🤣
Sounds awesome
You should totally do something super unique and run a pipe from each heade pipe out of a different location on the bed so it would have 8 individual exhaust pipes sticking out of the bed I know it sounds crazy and probably wouldn’t work but what if it did it would sound crazy noise coming from all directions
Loud pipe saves life
Now you just need a fireball tune to go with the boom tubes so its spitting fire like a dragon lol
I don’t think the cause of the big blocks demise was bc of the blower. I’m positive the cause was your right foot and the environment the engine was being operated in. Mildly built engines with a roots blower do not like excessive throttle whacks. Aluminum rods, a strong blower crank, heavy wall wrist pins and good pistons, along with a strong top end, is a must for what you want to do with the blower.
Nice tubes. Could I suggest a balance pipe between the two 2 1/2" pipes?
Needs an X pipe to sound right
With the bed rattling that bad y’all should consider sliding an old rubber floor mat or mud flap under the battery to avoid knocking the cells out of place.
Back the timing down a little bit and spray the house down on that big block. Stock will take 200-250 all day
Ya'll should put weight plates in the bed. Pip them tires
bruh that looks like it should go down a drag strip and do burnouts. just get some turbo chargers that cleetus has leftover and make that a monster
One of the auto Parts Warehouses I worked for had a fleet of old Mazda mini trucks. They ran forever, but forever was a ways back. The original owner sold the company and the new owner invested in a fleet of Chevy S10’s. Decent trucks I guess, but they all had one glaring problem. In a bout 80 to 100 thousand miles the Doors started falling off. When these trucks are making deliveries and time costs you money you drive these trucks hard. So, depending on how many miles or how many times the doors had been opened, the drivers side door on this truck might have had a door hinge pin issue, and that might have cause it to fall off, breaking the window in the process.
I dig that truck alot
Justin needs to drop the front end a couple inches
Sounds much better now, but it needs a x pipe badly. It'll make it sound even better with it.
second the x-pipe, or even a double x pipe lol
Need a “H” or X pipe put in so it doesn’t sound like 2 4 cylinders
Put the X or H pipe in Justin’s S-10 to make it sound better.
The first time you turned on the engine, it started playing bleed by messugah 😂😂😂
How much for a set of those jh diesel brand boom tubes those actually sound really cool id rock a set
That is Freaking Wicked
Needs an X pipe to equalize the cylinders and it’ll help scavenge exhaust as well.
Blower on the duramax race truck
When it comes time to doing a wrap on the mud truck let me know! We’ve been in the printing business for 30 plus years and are in Florida. Family owned business. Would love to work something out if you’re interested
Love the content!!
Justin's face while doing the burnout lol. Almost looks disappointed
Blower on the s10. Let's stop messing around 😅
Looks cool
Keep it cool with water sprayer on the radiator will keep tgat motor cool for ever on the chip
He did all that in Cros 😂
As always man
Love It
If noise is the ultimate goal I would think that something like a modified conical megaphone would be the loadest. If my reasoning is correct.
Better line up a ford 9 inch reared for the S10. Those factory S10 axles will definitely break. 😅
You'd hear the ties spinning and don't want that. Cut it off that's rite😂😂
Crocks in the shop 😮🚑
Put an H pipe on the S 10 will run better and it will sound better
Choppy little small block
The s10 I wonder if it would sound much more loud with an X pipe and some kinda of top mount supercharger 🤔
I'll give ya 20 bucks for those mufflers they would sound great on my truck! I'm local ;)