Thank you. Your video was easy to watch. Your step-by-step presentation was clear as was your technical explanation of how the throttle body works as a unit and how to clean and adjust it to get the right RPM and idle response.
@@DirtbikeDad I would start with the throttle, but it could be a number of things. Vacuum, Bad sensor, I am Working right now on a car with odd idling and it was the throttle body sensor cables that caught heat and melted. Are you having any other symptoms?
@@blacksheepxgarage no other symptoms. It just started doing it. After letting off the gas n put in neutral (5spd) idle hangs around 2,000 then slowly drops to 1,000. It just started having a code running lean on bank 1. It’s a 2.3 4 banger. Other code it’s had was thermostat below threshold. Basically stuck open. My lil daily/work truck love it. O yea it’s pushing 300,000. I already replaced the original self adjusting clutch after it just gave out all together. Any input would be great. Throttle cables seem fine.
@@DirtbikeDad check the throttle Spring and maybe clean it like in this video, it’s weird that’s only doing it in that gear tho, if it was a physical obstruction it would do it any time it got to that point
Shorten pipe ends before the rear wheels , and 1-3-1 resonator, if you look at the gas pump video the truck bed is off, you can see the resonator. th-cam.com/video/i524uiMuRvs/w-d-xo.htmlsi=a9LnfANYdU-18Ofj
Thank you. Your video was easy to watch. Your step-by-step presentation was clear as was your technical explanation of how the throttle body works as a unit and how to clean and adjust it to get the right RPM and idle response.
thank you, I try.
Hahaha....love your "difficulty" rating!
They have it coming ! 🥋👶🏻
I have a 09 2.3 ford ranger with a hanging idle. What could be the problem ??
@@DirtbikeDad I would start with the throttle, but it could be a number of things. Vacuum, Bad sensor, I am
Working right now on a car with odd idling and it was the throttle body sensor cables that caught heat and melted. Are you having any other symptoms?
@@blacksheepxgarage no other symptoms. It just started doing it. After letting off the gas n put in neutral (5spd) idle hangs around 2,000 then slowly drops to 1,000. It just started having a code running lean on bank 1. It’s a 2.3 4 banger. Other code it’s had was thermostat below threshold. Basically stuck open. My lil daily/work truck love it. O yea it’s pushing 300,000. I already replaced the original self adjusting clutch after it just gave out all together. Any input would be great. Throttle cables seem fine.
@@DirtbikeDad check the throttle
Spring and maybe clean it like in this video, it’s weird that’s only doing it in that gear tho, if it was a physical obstruction it would do it any time it got to that point
What's your exhaust setup?
Shorten pipe ends before the rear wheels , and 1-3-1 resonator, if you look at the gas pump video the truck bed is off, you can see the resonator.
th-cam.com/video/i524uiMuRvs/w-d-xo.htmlsi=a9LnfANYdU-18Ofj
What if its a very VERY strong 2 year old??
@@rolloraul7283 i ain’t got no shame in my dirty fighting
What’s your aftermarket air cleaner ?
Just your run of the mill KnN cone filter. its not enclosed, I am thinking of adding an enclosure. Maybe video coming soon?
Ford's stock throttle body's are clearly marked do not clean or adjust
Mine been running smooth likes a baby’s butt, and purring like a kitten. #outlaw
Why would ford say that? Dealer cash ? Sometimes you don’t even to take them off to clean them .
Is this a 3.0 ?
That is correct, good eye, its a 3.0 5 speed.
I have one 😃
Do you have shifting grinding noise? My synchro 1-2 has a very slight grind if i shift in high rev
@@blacksheepxgarage same
What does the bump stop do