Super interesting video I’ve bought an EVO2 and have a DX8 Spektrum. I’m waiting for the Spektrum receiver to bind and put your teaching into practice! Your channel inspires me for some years now.. Thanks, man! Greetings from a sailor
Thanks for the video, I have a question,I have this bind to my dx9 same heli omp 1, But when i try to do a loop I cant becuase it selflevel itself so fast that wont allow me to do my loop ir flip it over it only turn to certain angle but not able to flip over.Thanks for your help
That means that your in safe mode. You need to turn it of with a one of your switches. Not sure how you set it up. When the light on the gyro blink your out of safe if i remember correct.
@@ArcticRc Thanks for quick repond, yes on my monitor chanel 5 Gear, its all 100% does not move, i will turn it off and check it tomorrow, So im sure Self level is on chanel 5. do you think this is why the heli doesnt flip over? - last question please, If i change G to another switch that i can click when i need it, will this level my heli if its flying upside down to a level position? is this like a panic mode or recovery mode? much appreciate it
@@rcfan85 you can assign wathever switch in your radio. Not sure what you mean with flip it. The heli will go back to normal if you flip the flight leveling switch but you still need to fly it. To fly inverted the self leveling mode need to be turned off.
@@ArcticRc Thanks for the support, your help was very helpful and now i got my helis rocking in the sky, Very helpful info from you buddy, Thanks again
I only have a couple Spektrum RX sitting around and they don't have the satellite conation. Does this mean I have to buy a different brand RX to bind with?
Managed to get the M2 EXP at Christmas, have done the required pre-steps and it is now bound to my dx6e radio. I use switch B for flight-mode changing where position 0 is for normal/SAFE, position 1 for idle up 1 and position 2 for idle up 2. With the radio on and flight mode switch at 0, I plug a battery into the heli and after it has initialized, I see a solid red light (on left-hand side) and a solid blue light (on right-hand side) in the tiny LED window on the flybarless controller. Does this mean that stabilization/self-levelling is active? In idle up 1 and 2, the red led blinks whilst the blue stays solid. Does that sound correct?
Are you using Spektrum go for the ordinary remote satellites that you get from older DSMX receivers like Ar6010 7000 and 8000. 3th party remote satellites prove to be bad in my case.
ugh, I just ordered a Kensun rem RX which has a bind button. I truly figured that this stuff would be handled by now. I was into RC back around 2005 and left a while.
Very helpful and informative video... Just a suggestion tho... Maybe try not to talk like a robot so much lol...its like u pause between evry word....thought my connection was breakin up and the vid was buffering ther for a minute lol
Super interesting video
I’ve bought an EVO2 and have a DX8 Spektrum.
I’m waiting for the Spektrum receiver to bind and put your teaching into practice!
Your channel inspires me for some years now..
Thanks, man!
Greetings from a sailor
Thanks again for your very informative and teaching video, Arctic RC!
Excellent video, just what I needed. Thanks so much.
Excelente toda la explicacion y realmente este modelo de helicoptero es una maravilla para llevarlo y volar en todos lados, muchas gracias.Saludos
Will the radio show the voltage?
Not sure Sir. Cause you then need a receiver with telemetry.
Que buen helicóptero.
Una pregunta, no necesita el receptor. Solo funciona con el satélite?
You do not need a receiver. A satellite receiver is all you need.
Thanks for the video, I have a question,I have this bind to my dx9 same heli omp 1, But when i try to do a loop I cant becuase it selflevel itself so fast that wont allow me to do my loop ir flip it over
it only turn to certain angle but not able to flip over.Thanks for your help
That means that your in safe mode. You need to turn it of with a one of your switches. Not sure how you set it up. When the light on the gyro blink your out of safe if i remember correct.
@@ArcticRc Thanks for quick repond, yes on my monitor chanel 5 Gear, its all 100% does not move, i will turn it off and check it tomorrow, So im sure Self level is on chanel 5. do you think this is why the heli doesnt flip over?
- last question please, If i change G to another switch that i can click when i need it, will this level my heli if its flying upside down to a level position? is this like a panic mode or recovery mode?
much appreciate it
@@rcfan85 you can assign wathever switch in your radio. Not sure what you mean with flip it. The heli will go back to normal if you flip the flight leveling switch but you still need to fly it. To fly inverted the self leveling mode need to be turned off.
@@ArcticRc Thanks for the support, your help was very helpful and now i got my helis rocking in the sky, Very helpful info from you buddy, Thanks again
I only have a couple Spektrum RX sitting around and they don't have the satellite conation. Does this mean I have to buy a different brand RX to bind with?
Nope you can buy 3 party satellites. I will check it out and give you some tip. I know hobbyking has some cheap ones..
@@ArcticRc I ordered the Kensun
Hi, do you know if the DX6i would work OK with the M2 (with appropriate satellite)?
I guess so.. try searching for it on youtube. I only used my NX10 but a 6ch should be more enough
Managed to get the M2 EXP at Christmas, have done the required pre-steps and it is now bound to my dx6e radio. I use switch B for flight-mode changing where position 0 is for normal/SAFE, position 1 for idle up 1 and position 2 for idle up 2. With the radio on and flight mode switch at 0, I plug a battery into the heli and after it has initialized, I see a solid red light (on left-hand side) and a solid blue light (on right-hand side) in the tiny LED window on the flybarless controller. Does this mean that stabilization/self-levelling is active? In idle up 1 and 2, the red led blinks whilst the blue stays solid. Does that sound correct?
Yes it is correct. 🥰
What product are you referring to as satellite?
Are you using Spektrum go for the ordinary remote satellites that you get from older DSMX receivers like Ar6010 7000 and 8000. 3th party remote satellites prove to be bad in my case.
@@ArcticRc OK, I've done some reading and I understand now. BNF doesn't mean exactly what it represents here. 'Remote receiver' now makes sense. Thanx
@@ArcticRc I have SPM9745 DSMX Receiver. As for RX, it's AR410 or AR620. Then whatever is in the Heli
ugh, I just ordered a Kensun rem RX which has a bind button. I truly figured that this stuff would be handled by now. I was into RC back around 2005 and left a while.
How do you like the NX10?
Like all my spektrum radios i really like it. Many new cool features and the hall gimbals are super 😊
@@ArcticRc debating buying another DX9 instead of upgrading
@@sleepingpanda8927 I did upgrade and im glad. Allways up to date with the wifi on and just a few bucks more. 😊
RaceTek Kensun Satellite 2.4GHz Receiver w/Binding Button [RTK-KEN-01015]
Very helpful and informative video... Just a suggestion tho... Maybe try not to talk like a robot so much lol...its like u pause between evry word....thought my connection was breakin up and the vid was buffering ther for a minute lol