Silhouette Cameo Print and Cut - Troubleshoot Alignment Errors
ฝัง
- เผยแพร่เมื่อ 11 ก.ย. 2024
- In this video I will show you a possible solution to Print and Cut errors with your Silhouette machine.
If your machine regularly fails to read your registration marks, they may be in the wrong spot. I will show you how to check your prints to see if this is a problem you're having and a possible solution if it is.
Thanks for checking out my channel!
Find me on Facebook: / echoia
Find me on Twitter: / echoia
Where I blog: EchoStenger.com
My Portfolio: Echoia.com
THANK YOU! THANK YOU! THANK YOU! I don't know if you're still following/tracking this video, but it has saved my sanity almost 5 years after you posted it! I was ready to Olympic-style hammer throw my brand new Cameo 4 down the street!...I will add, for anyone scouring the internet like myself, that the "advanced settings" can be found under the "page setup" in Silhouette Studio Designer Edition...the same place used to add the registration marks. It took multiple attempts at changing the settings and test printing, but...SUCCESS! Thanks again!!!
(I'm using the Canon MG3620 printer)
Lol! Thank you for the descriptive account of the frustration this causes!! I'm so glad it was able to put you on the right track and thank you SO MUCH for the added detail of how you accessed and adjusted 💕 the knowledge sharing of this community was why I bought a cameo so long ago.
Thank you very much, after the stupid suggestion of "if the automatic position sensor gives an error, make manual adjustment", which was explained as a solution in about 1 million other videos I watched, I thank you very much for saying that the problem was the paper margin settings on the printer. I use my cameo 3 and cameo 4 in a copy center and change the margin settings for different jobs so that my printer can center the print on duplex prints. Regarding this problem, Silhouette Turkey's authorized technical service suggested to me that I should place fewer objects on paper, but of course this did not solve the problem. Even the authorized technical service could not explain to me why my cameo 3 and cameo 4 cutting machines, which used to cut the same number of objects, now give a position sensor error and cannot cut. The problem was solved by reducing the printer margin to just 1mm on the printer screen. Hey Silhouette Türkiye technical service, hear this and don't make fools of us.
I know I may be a little late commenting but I'm so excited I've been jumping around my house so happy that I've finally fixed this problem with the help of this video. I've been struggling with this issue since I got my silhouette a year ago, and was ready to throw away it away thinking that it was the machine's fault. But, it was my printer's. I have a Canon MF733cdw. And I do not have the adjust margins settings on computer as show in this video. However, I did some research and turns out these settings on on the touch screen on my printer. For my fellow canon users, go to menu-adjustment/maintenance-adjust image quality-adjust print postion> and from there you can change the margins like shown in the video. Thank you so much for sharing your knowledge and help me figure this out. I'm so happy. :) thank you!
There's no late! Just adding to the knowledge
Oh my god… I think I love you 😂 I have had my Silhouette Cameo 3 for a very long time and each year I brought it out to try again I was so ready to throw it out the window…. But this little trick you gave was amazing it worked. I couldn’t believe how much my square and corner box were out of whack. I eventually found the place I needed to change it from that to be honest was the hardest part. I did it in the silhouette software in the end and it’s now definitely a game changer as I no longer have to cut my labels by hand anymore… yay, THANKYOU so very much x
Hi. Though this post is 4 years ago., it magically fixed my cameo cutting issues. I ve been calibrating the machine for days! and it sucks! Thank you for this video. I am very thankful to you. I wasted a lot of time and materials just fixing thjs
Thank you so so so much for this.......I was in tears yesterday, I finally gave up as I could not take the stress, came back at it refreshed today and found your video...........my registration marks were definitely off..... I am working on realigning my printer head now...fingers crossed!
i was blaming my cameo 4 for the alignment when the one at fault is my inkjet printer..you're a savior!!
I know this was years ago, but I can't find something like this for Mac! Honestly the community provides so much better support than Silhouette
Thanks SO much! This seems to have resolved my issue. (I'm really new at this, so we'll see.) So glad I thought to look for some troubleshooting advice before calibrating.
For anyone with a Brother printer (my model is mfc-j5620dw), the setting is simply Preferences > Advanced > Other Print Options > Uneven Line Alignment. Then select the paper size you're having issue with. I made myself crazy trying to find the offset settings, but they aren't available as a manual option in my printer.
Thank you for your detailed comment! I'm so glad to be helpful and to see more info added. Some days I hated my Silhouette over this, and it was never even its fault.
Oh my!!! Thank you SO MUCH!!! I bought a load of print and cut commercial license items when they came out, then spent about 6 months in outrageous frustration and put the whole thing to rest. Just now I searched again on YT and found you. Thank you so much - all solved and my fab print and cuts are now working for me - I can't believe it was so simple . 🌼🦋👏
You're so welcome! I love hearing this.
I'm happy I watched this and printed a registration mark to line up with the cutting board. . I could not change the alignment on my printer settings. But you can easily change the margins for the placement of the cameo registration marks in the Cameo software, under advanced.
It took me over 10 tries to get the margins lined up, -26 for me. Thank you for the help. 2 hours later, I finally got it!
Thank you. Seriously. I believe this just fixed all my issues. Ive only done one test cut but its the first perfect cut Ive had!
This may help someone like me, I tried something weird than it worked! I just folded my paper and saw some misalignment with my printer (Canon G2060), I just do one thing then the alignment shows correctly, Just goto Preference -> Page Setup -> Just uncheck this box "Automatically reduce large document that the printer cannot output", This magically worked for me :) Hope it will save someone's life too...
OMG I wasted many sticker before I saw your Video. Thank you so so much for sharing this useful info and experienced. I was nearly buy a new machine!! Thank you
Thank you so much! This worked like a charm for me - I had to reset my margins 1/8th inch to right. I had no idea that they were supposed to line up when folded until your video
I'm so glad!
Thanks, that trick worked on my et-2720. But I entered +2 instead. It was a little adjustment but it did the trick. It has been very accurate now since I did the adjustment. I lived with it and accepted minor misalignment for a long time (I have Cameo 1, with Graphtec blade, that is how long) that is why I usually give a big offset on my stickers to compensate. Now it is fixed, so Thank you.
Thats wonderful! I'm so glad to hear it.
Thank you so much! I have a Epson L805. For me it worked when I moved to -11. Amazing. Finally an alligment
OMG this so solved the problem I spent hours trying to figure out. Thank you thank you!
I'm so glad it helped!
Thank you so much!! I am so glad I found your video, it helped me a lot. I set mine to -4 top front. I have a Epson ecotank 2400.
thank you!!! you are the online I found to help me with this!
Thank you for this video! It helped solved the issues I was having with the Cameo 3.
Thank You so much it worked for me, the only thing i did differently was adjusted the spacing in the silhouette program itself.
Hi! Just want to ask if you encountered different print positions of registration marks? I printed 5 copies and 2 of them are printed weird.
My registration marks were off too, and I managed to fix them with my printer settings. However the Cameo cuts exactly the same.. must be another issue here.
2 questions 1 what silhouette are you using? And 2 where do you find those settings?
You are amazing... I wasted so much easysubli paper. God Bless!
Oh no! I hope it goes better, I know the feeling.
Thanks Echoia, its TOP 50! it's so practical and it's helps a lot!
Hi! Does anyone know how to find these settings for the hp7155? Any help will be greatly appreciated
Everytime i traced out my design n ready to cut it out on my vinyl ill have the blade on the top left or middle of the vinyl then as soon as it starts i goes all the way down to the vinyl n the complete opposite of where i want it to go help please
I wasted almost 100 sheets but i cant align it right. Its so frustrating. 😩😩😩😭😭😭
I'm so sorry to hear this 😞 This issue is so vast and upsetting!
I needed this! Thank you so much!
My silhouette cuts to the left like the off set is not balance and I don't know why. Hopefully when I try this it will work 😭
i don’t have those options on my printing preferences ☹️
my lil box is actually sitting above the guideline. so in this instance, which offset should i adjust to either move the box down a bit...or move the guide line up?
I have to give this a try I'm having trouble with my machine
does anyone know where i can find the setting for a macbook?
Thanks Very much for sharing this fix :)
So just a heads up... I went and bought the Epson Work Force ET-8700 to possibly get into doing planner stickers and planner sales via Etsy. Please note I have a cricut but I down loaded the Silhouette software because the Cricut software is miserably insufficient. My cuts do not line up whether I use print and cut or try to line up a sheet on my own.
Turns out this $999 printer...... is incapable of borderless printing. It took me MONTHS to figure out that setting my margins at 0 wasn't taking because they CAN'T take... and I've blown through a cartirdge of each color ink (which is supposed to be like a 4 month supply) and I don't even know how many hundreds of sticker paper. I am definitely stubborn in that I keep trying but now I have a feeling it's all because there is a .12 minimum border! Hope this helps someone else NOT take so much time and so many expensive materials to figure it out!
Thank you! Cuts on the left are fine, but distorted by the time I get to the right side of the page! Not anymore. Where do I send the check?
I fixed it! Thank you so much for sharing this info!
My problem was on the right side of the paper sticker. As it cut through to the bottom, cutting was not align with the printed image
I'm ready to cry. My marks don't line up but there's no way for me to change the offset in my printer settings.
Other comments says you can change the cameo registration settings instead
try downloading printer drivers
Thank you so much , very helpful!
I'm glad to hear it! : ) Thank you for watching!
fixed! thank you sooooo much
I love to hear this!
I have a different printer and a Macbook but with a bit of persistence I found the margin settings for my HP4500 printer. Everyone's printer is different so it might be different on how you change this setting even. I had to change mine to .35 on the left margin to get it to line up. I was GOING CRAZY...my silhouette cut stickers just fine for years and all the sudden it started doing this so I have no idea. We will see if this works! thank you so much!
Nope, no luck :( Still cutting off. I've calibrated, I've done this, I have no idea what's going on. It cut fine before.
I'm so sorry : ( I wish it had helped. My printer settings change when my driver gets updated and things like that. So every time I get it JUST RIGHT! I still have to test each and every project before sending 60 pages through the printer because it might have recalibrated something again : ( And the worst part is that the settings aren't always the same. I can't just make a note of them and check before each printing session.
Gah that’s annoying! I have no idea what’s going on with this thing, it will cut one sheet fine or even 1/2 the sheet fine and the rest will be off. I just deleted and re-downloaded silhouette and walked away from it. My registration marks were definitely off but I wonder if I need to calibrate it again now that I did that with the printer?
Unfortuantly this seems to be unhelpful for Mac users. Everything is in a different place. I'm so stressed trying to figure this out and on top of that I barely know how a Mac works in the first place! I never should have switched from PC. Thanks for making this great video! I'm just disappointed that my printer is still misaligned. *sigh*
If anyone has a tip for this issue while using a Mac I would be very appreciative!
do you set this up every time you print?
This isn't working for me. I own Epson printer and an IMAC. It doesn't give me the options to fix margins. :(
I'm so sorry! Do you have the Epson software all installed?
I don't have an iMac, so I can't look into it personally : ( If you do find a solution try to let us know. This is a common issue and as many solutions as possible should be published so we can all help and support each other!
Eccentric Designs I have a Macbook. Could you find out where are these settings located in your iMac??
pariplatinum I tried but couldn’t find it
Eccentric Designs Could you find any other way to cut stickers perfectly or do they still cut a bit off the edge?
pariplatinum I noticed if I keep images far apart, it works ok for me. For instance 10-12 images don’t cut properly unless they are far apart.
It still cuts a bit off but not too bad that I can’t use it.
Hi. I folded over with the long sides lining up and they're fine. But if I do the same for the bottom its slightly off. Are those supposed to match up as well?? Unfortunately I'm seeing this a couple years after you made it and the software had changed so I'm not seeing those printer options
Do you mean the top and bottom don't line up?
If you're attempting a double-sided print and cut and the left and right sides match up, then when you try to print the second/back side make sure to feed the same end of your paper into the printer as you did with the front design.
The settings for the margin aren't part of the software for Silhouette but have more to do with a full and proper installation of your printer I believe.
Not sure what a double sided print-and-cut is. What I mean is tho, I folded long ways as you said in the video (lets call it hotdog) and the reg marks matched up perfectly. But I folded it short ways as well (lets call it hamburger) and they were off. I was just wondering if the bottom and top reg marks being off matters as well??
I turned off my borderless printing option. That seems to have fixed the problem a bit. But it's still slightly off.It could just be me and my perfectionist brain. But I completely fill my shape (its a circle) with a solid colored pattern (it's for phone grips). I was just hoping that when it cuts there wouldn't be a small white space to one side
@@DesignsByAngee You can adjust the height of the marks, if you aren't printing on both sides then the registration marks lining up doesn't matter I don't think.
If you're getting white space, make your design a little bigger if it doesn't have to be precise, so that it bleeds outside of your cut area a bit. It's common to need this extra area for print and cut.
Ok, I may do the second thing, making the design a little outside the shape. Thanks for your input :)
Does this help with the cutter not taking in the cutting Mat all the way? My cuts keep happening on the map and not the vinyl! Very frustrating 😩
Taylor Rednose - Alӧr I don’t think it would help with that, for that make sure you’re pressing “load mat” and not “load media” and if it continues look in the cut screen for four arrows to advance your mat a bit before cutting. I’m not sure exactly where they are in the latest version of the software but if you don’t see them let me know and I’ll look for them and give more precise info 💕 they may also be on the touch display of the silhouette machine once you load up your mat.
When I print n cut for 5pcs, there alway 3 of them r out of cutting line.
Its OK when u do for small amount of stickers but sometime we get a big amount of order then the problem will become serious. 3hours job become 6 hours. Wasting time n stickers.
Almost want to throw this stupid machine n get the other brand.
I'm gonna try your way tonight.
Tq for sharing, hope it works.
(sorry for the broken English guys😅)
OMG!!! You are a Queen. THANK YOU!! THANK YOU!! I almost consider throwing a hammer at my silhouette portrait.
Hello
Does this help with images cutting off! Because I set my silhouette to cut an image and it cuts off to where some of the image was missing.
Hi tanisha! Have you looked up help with calibrating your registration marks? If not, I would start there.
thank you so much!!! :)
thank you so much
I tried on my 2 different canon printer as well as on my epson, impossible to aligne the marks, i really regret buying this Cameo 4.
Are you using a PC or an Apple product with your printer? I am not finding these preferences in my printer settings on my APPLE>
I am using windows 10. I wouldn't know where to find them in Mac because I've never printed from one : ( I'm so sorry!
If you're able to find it, please let me know!
Thanks!
THank you!
My problem is the bottom left registration mark. The horizontal part of the mark does not print. What do I do?
You need to set up your page size as US Letter (Borderless) instead of US Letter. Also, your printer must be capable of doing borderless printing. If your printer doesn't do borderless printing, adjust the margins to be at least .5 inches on each side.
How to get what value to enter like negative 12?
im using fuji xerox and i cant find those maintainence :(
so the registration square is the same as the test cut square?
I'm not sure what you mean, but the registration square is a print vs a cut and generally there are marks in all four corners for registration.
@@Echoia i knew that just didn't get the video i sorted it now anyways tha nks for replying x
Hi we are having problems cutting on cameo 3,the alignment is off..help!!!!..we are printing transfer paper using Epson stylus nx420
Can you give me more info on how the alignment is affecting your cuts?
Does anyone have the solution to how to do this with a Canon printer please?
Libby Farleigh I need to know as well...
Thanks soooooooo muc°°°°•○●♡
I can't fix mine huhuhu 😭
you're voice over is quite bad...very pitchy and hurt my ears
LOL! I have definitely upgraded my microphone in the 3.5 years since making this video. We aren't all professional youtubers, some of us are just here for the knowledge sharing ; )
My registration marks line up, but my cuts are still off. But not in the same direction. Some cut too high, some too low.
Did you solve this? I have the same problem.
anyone having this problem? me too and i have no idea the problem is on the epson L360 or my silhouette
Have you solved your problem? I have the same issue...