hello !! just finishing installing this kit and love the finished result. i have installed two of your clicky kits previously on a jdm-055 and one clicky on a non-supported board and all 3 installations went smooth and loved those results. to be honest, in having done previous installs of just the clicky kits, i didnt watch your whole clicky kit video before i started installing it. i am installing on a jdm-055 board. my first issue in installing was that the inserts for the L2/R2 kept popping out and would not stay in. it was like trying to keep a grasshopper still lol. watching your install video post install, i see that you clip the L2/R2 triggers, maybe this fixes this issue? dont know, i never clipped mine. instead having spare/extra parts left over from my previous “just clicky” kits, i used those L2/R2 inserts instead, they didnt pop out like the new ones. i did however have a clearance issue with these inserts, but i used a nail file to sand down their flat surface a bit and now they work just fine. i also installed the sdp buttons and found that after complete reassembly, a couple if the d-pad buttons and a couple of the face buttons did not work. i loosened the 2 back buttons closest to the L2/R2 buttons about a quarter of a turn and now those buttons work fine too. i am ‘extreme’ly happy with the final result ... i guess if i ever have to take the controller apart again i will sand down the sdp/face button inserts just a little bit. so for not following your instructions (lol) things i thought turned out great, my ending thoughts are great kit, fun to assemble, awesome to play with, maybe some very small tolerance issues, but nothing that cannot easily be worked around and for the first release version of the kit i think an awesome result. =:3
Thank you so much for your detailed feedback! And I think the solution you fix the L2 R2 issue will help other users, so we will pin your comment :D Thanks again and we are glad to know that you like our products!! :D
@@unraiivaledsenpai8253 i also have installed several eXteremRate clicky kit that just includes bumpers and triggers (L1/R1 and L2/R2) and have had excellent results with this kit too
Installed these with ease. As a matter of fact they were so good I ended up ordering a second kit and a front housing. Being that I had recently got my hands on 10 brand new ps4 back button attachments, they work great wit h the shells I've ordered as well. So far my experience has been great and no problems so far.
hello. i use mine in conjunction with the sony back button attachment too. imho you get a very nice custom controller at a fraction of the cost. my first clicky kit install i had for about two years i think, the left joystick broke, so i removed the clicky kit from the broken controller and installed on a new jdm 55 board and the orig clicky kit is still going strong ... it outlived one controller already 😂
Bought everything you had for the Ps5 Controller. I got the ultimate Controller, thanks to you. And it was Cheaper than other Controller, which were done out of the box.
I have this kit combined with the dawn 2.0 remap kit. Wanted to share that with this combined with trigger stops doesn’t make a difference if the trigger stops are enabled or disabled. It’ll still have less travel and have the mouse click feel. This kit is awesome! The only con I notice is that the D-Pad is a little harder to press. I gotta click it multiple times for it to feel more “broken in”. For the price point this isn’t a bad option. I wish I went with this instead of the scuf controller. That thing broke with 9 months of heavy use. Then the sticks started drifting really bad. Lol.
Thanks for your feedback. These buttons are not the real mouse swatches (there is not enough space to place them), so we still need more pressure on them when compare to the real mouse click.
I found the reason for the problem people seem to be having that their R2 & L2 got stuck, is that the clear plastic that you put inside the trigger appears to be not compatible with all the trigger buttons on the ps4 controller, so the clear plastic is not thoroughly flushed into the trigger, so either they are not clicking right or they got stuck, so whenever you're in-game it will just always be pressed. I found this video on which triggers are compatible and which aren't ; th-cam.com/video/6J0_uWWmpU4/w-d-xo.html .The comparison for the trigger buttons starts at 14:07 Hope ExtremeRate will see this. Thanks !
What I found out, I cut the plastic that they did in the video and my triggers didn’t work, tried other triggers without chopping the plastic and it worked!
Hey! It would be really cool if you sold this but just for the dpad, I love the rest of the default ps4 controller but the dpad is terrible and I wish it was clicky
Thx for the tutorial.. Just installed this kit with the Thumb gear and OMG, game changer!! Never going back! Might mod a couple more controllers It think!
Hello, i suggest to make the sensors which detect inputs on the new "clicky triggers kit" board larger because they tend not to pick up the inputs if you press the front buttons at the edges. It would be a perfect custom then ^^
I cut the long rectangle at L2 and R2. Thus the clicky keys work. At the control cross and the buttons I left the rubber, which the two attached to each. However, you have to cut out the holes first, which is very easy, since they are practically given. Everything works. Thanks for this kit and I hope I could help.
Okay, i did this and... My PS4 controller went orange and blinked 3 times and it doesn't connect. I'm using the CUH ZCT2U controller, and i didn't sand or clipped the triggers. Is that why my controller is only showing orange light instead of white light? Or is it other way around, i don't wanna lose my controller...
Hallo, mich würde interessieren ob man dieses Klicky system mit der Schale Decade Turnier Control DTC in Verbindung zusammenbauen kann!? Ich weiss da sind schon Triggerstopps verbaut aber die sind mechanisch und nicht Clicky. Vielleicht kann mir das bitte einer beantworten, nicht das es Kurzschluss gibt wenn man die Schaltungen über einander legt. Man kann ja bei DTC die Triggerstopps Mechanik verbauen aber lässt sie einfach in einer Position. Geht das?
How do I access the clips no the home button I’ve been trying for over 2 hours mine just don’t wanna pop this is my first controller I’ve done so Idk if I’m being too cautious or Edit got it open everything good but triggers l2 constantly being pressed and click sound in either
Just finished installing the kit. I went into madden and when I press my bumpers they switch inputs to my keyboard and make the game weird to play. Is there a way to fix this? Is that what the bumpers do? Edit: My right bumper is right click and left bumper is left click. Is there a way to fix this?
Finally you've completed the kit for the PS4, three months later but I'll buy this and add my paddles systems or your on top of it, thank you I've been waiting for this for some time now ☺️ happy now it's available for the PS4 controller.
no, you can see you would need to put the 2 flexibles circuit boards one over the other, cut the modded flexible circuit to get rid of the triggers contacts only. So it's not sure it would fit, and it's not sure it would work at all.
Olá amigo, sou brasileiro e gostaria de saber se você tem esse kit para a versão 1 do DualShock 4, eu tenho dois controles, a versão do ps4 fat e a versão do ps4 slim que é igual a do vídeo, gostaria de por o kit nos dois controles mas vejo no ali express que vende apenas para a versão do slim, você teria o kit para a versão 1 também ?
I installed this on a previously working remap kit controller. I'm having an issue where the remap isn't working on this clicky board. I get the blue light on the remap and the light blinks to confirm I've set a mapping but then after exiting the mapping function, the newly mapped button doesn't work on K1-K4 anywhere.
I bought this exact kit and the trigger inserts will not work. They keep popping out. I double checked to make sure i got the right kit and i cannot get them to stay in
Someone else mentioned it, but I'll pass it along: If your L2 and R2 buttons aren't clicking because the little clear pieces aren't staying in, use an OLD controller's L2 and R2 buttons. I assume like a gen 1 controller you might have gotten in like 2014. Worked well for me. But honestly Extreme Rate should do a little better pop
YOU HAVE SAVED ME A LOT OF ANGER AND PAIN. My L2 R2 were just holding down the trigger. Went and fished out the old old L2 and R2s and it fit like a charm. Thank you good sir!!!
@@faded_yt5845 The clips as in the two hard plastic pieces on the two triggers? If it's an older gen 1 controller you shouldn't need to do any cutting or modifications to them. That was just what I noticed from limited examples I had laying around though
Is there a way to reduce the tolerances with the face buttons? Maybe Filing the rubber pads inside the buttons could help? They feel very stiff once the controller is closed with your full clicky custom.
Bought kit, did sanding of the slots, cutting pieces off the l2 and r2 as well, I am finally getting the click but no response in game? Is it a bad kit? Or do I need to sand down more ?
Hello. Do you just happen to sell click pads instead? I tried this, right trigger got stuck, tried to cut, trigger piece keeps falling out, and can't really adjust it without the pieces falling out. Tried to mimic everything done in the video. If you have a dull functional click pad with solid triggers for sale, I'd like to buy one thank you.
this is an absolute must have for fighting games especially when paired w/ the sdp buttons. will definitely be purchasing another one for my spare ds4 controller. are you guys working on omron switches in the near future?
Thanks for your feedback! The space inside the PS4 controller is just too narrow, so it's not possible to use the Omron switches if we don't break the front housing.
Aww man I just got the v1 clicky trigger. I don't know yall came out with a newer version. But has a little weird play for R2 button. It gets stuck sometimes.
My d-pad left and right buttons in 2 weeks of intense use in tekken7 aren't clicky anymore and seems barely functionals..... It's sad because it was very good to play with when new...
I just installed this kit on my PS4 controller, bumpers and triggers feels good they are very responsive, but face buttons feel a little hard to hit, I don't know maybe it's just me. specially if you play claw like me, I use my index finger to press all 4 right face buttons and my finger hurts with these type of buttons, I like better the regular face buttons because they feel soft, clicky feels good but hard to me personally, if I had known I would have got only the bumper and triggers kit, I kinda regret 😅
This WHOLE clicky kit is face buttons and shoulder buttons in one piece, so if you purchase this kit, don't purchase the clicky triggers kit again. If you combo the back buttons kit and the WHOLE clicky kit, you have to install the WHOLE clicky kit first.
@@ExtremeRate I aready have the DTC but I want only the triggers for the bumpers since l2 and r2 are already smart triggering. What can I do/what would you recommend?
Why did you change that circuit Board/foil thing? I understand mechanically altering the controller by clipping things off or stuffing stuff in. And (why) are they tactile/clicky?
The foil thing is a membrane with button pads on it, its the physical sensors that connect the buttons to the motherboard. The replacement membrane has clicky button sensors instead of soft rubber ones; you're literally changing the mechanism inside the button.
Just installed this kit & I love it Just wished that the back buttons on the DTC kit would feel the same, buttons on the DTC kit are kinda hard to press specially k2 & k4
I already bought both kits separately. And installed them unless this is a new version. This is pretty cool. Edit: oops I thought this was the ps5 controller.
So, would you guys ever consider releasing just a face kit for the DS4? The clicky kit released for the DualSense only covered the face buttons and I’m wanting to do something similar with my DS4. I only want to mod the dpad and face buttons.
You can just cut off the shoulder buttons part from this kit, and during the installation, don't take off the original conductive film from the controller, just lay the cut clicky kit on it, and also don't install the 4 tiny plastic inserts into the L1R1L2R2, and then that's the result you want.
@@MikeLaRock88 I only ever bought the face clicky kit for the DualSense. Never bothered with it the DS4, though I should look into that. But to be fair, I probably won’t. The switch for ‘up’ on my d-pad broke for the DualSense face clicky kit after just a few months.
Just bought this,havent installed yet,would be cool to have a kit to convert from micro-usb to usb-c,this pad is one of the best,if not the best for fighting games,micro-usb sucks,nice all these mods are available,why should only arcade sticks get all the cool mods?( I actually play both,but pads are more nostalgic to me)
Problems… I today installed the full clicky kit on the standard PS4 controller exactly per tuition video. But the spacers inside the L2/R2 buttons are too big, so the buttons stick on at all times. I note a few others had same problem… what’s the fix? Do I need to re-engineer / file then down myself, or do I write off the controller as a result of a bad purchase…? Little annoying…
Headsup: I combined this with the DTC kit and Split D-Pad. The tolerances for the Split D-pad and the clicky buttons are a bit too tight that when the case is fully closed, they press down on the directional buttons. Had to use the OEM d-pad.
Just to let everyone know you have to get old triggers from an old controller instead of a new one that's why it's popping out I apologize for the brand just a weird way to do it and for people who have old controllers grab your triggers and switch them out cuz the new ones ain't going to work.
You sir are a GENIUS. I took your advice and it worked. I don't technically understand why or how it worked, but the transparent looking pieces definitely stayed in place. Thank you so much
hello !! just finishing installing this kit and love the finished result. i have installed two of your clicky kits previously on a jdm-055 and one clicky on a non-supported board and all 3 installations went smooth and loved those results. to be honest, in having done previous installs of just the clicky kits, i didnt watch your whole clicky kit video before i started installing it. i am installing on a jdm-055 board. my first issue in installing was that the inserts for the L2/R2 kept popping out and would not stay in. it was like trying to keep a grasshopper still lol. watching your install video post install, i see that you clip the L2/R2 triggers, maybe this fixes this issue? dont know, i never clipped mine. instead having spare/extra parts left over from my previous “just clicky” kits, i used those L2/R2 inserts instead, they didnt pop out like the new ones. i did however have a clearance issue with these inserts, but i used a nail file to sand down their flat surface a bit and now they work just fine. i also installed the sdp buttons and found that after complete reassembly, a couple if the d-pad buttons and a couple of the face buttons did not work. i loosened the 2 back buttons closest to the L2/R2 buttons about a quarter of a turn and now those buttons work fine too. i am ‘extreme’ly happy with the final result ... i guess if i ever have to take the controller apart again i will sand down the sdp/face button inserts just a little bit. so for not following your instructions (lol) things i thought turned out great, my ending thoughts are great kit, fun to assemble, awesome to play with, maybe some very small tolerance issues, but nothing that cannot easily be worked around and for the first release version of the kit i think an awesome result. =:3
Thank you so much for your detailed feedback! And I think the solution you fix the L2 R2 issue will help other users, so we will pin your comment :D Thanks again and we are glad to know that you like our products!! :D
Yo boss what other click kit did you use to keep your L2 R2 in tact?
@@unraiivaledsenpai8253 i also have installed several eXteremRate clicky kit that just includes bumpers and triggers (L1/R1 and L2/R2) and have had excellent results with this kit too
My L2 and R2 inserts keep poppin out. Mines is a JDM-055 so this shouldn’t be happening. Can anyone help?
@@SToKeR122 very lightly sanding helped i had the same issue ... but be careful dont sand too much, just a little bit
Installed these with ease. As a matter of fact they were so good I ended up ordering a second kit and a front housing. Being that I had recently got my hands on 10 brand new ps4 back button attachments, they work great wit
h the shells I've ordered as well. So far my experience has been great and no problems so far.
hello. i use mine in conjunction with the sony back button attachment too. imho you get a very nice custom controller at a fraction of the cost. my first clicky kit install i had for about two years i think, the left joystick broke, so i removed the clicky kit from the broken controller and installed on a new jdm 55 board and the orig clicky kit is still going strong ... it outlived one controller already 😂
Bought everything you had for the Ps5 Controller. I got the ultimate Controller, thanks to you. And it was Cheaper than other Controller, which were done out of the box.
I have this kit combined with the dawn 2.0 remap kit. Wanted to share that with this combined with trigger stops doesn’t make a difference if the trigger stops are enabled or disabled. It’ll still have less travel and have the mouse click feel. This kit is awesome!
The only con I notice is that the D-Pad is a little harder to press. I gotta click it multiple times for it to feel more “broken in”. For the price point this isn’t a bad option. I wish I went with this instead of the scuf controller. That thing broke with 9 months of heavy use. Then the sticks started drifting really bad. Lol.
Thanks for your feedback. These buttons are not the real mouse swatches (there is not enough space to place them), so we still need more pressure on them when compare to the real mouse click.
@@ExtremeRate great info. Thank you!!
@@krazykrn9066 You are most welcome! :)
You didn’t have any issues with them together?
@@squidtentacles None at all.
My R and L2 is buged,and sometimes gives a signal and reandome activates please Help :(
I found the reason for the problem people seem to be having that their R2 & L2 got stuck, is that the clear plastic that you put inside the trigger appears to be not compatible with all the trigger buttons on the ps4 controller, so the clear plastic is not thoroughly flushed into the trigger, so either they are not clicking right or they got stuck, so whenever you're in-game it will just always be pressed. I found this video on which triggers are compatible and which aren't ; th-cam.com/video/6J0_uWWmpU4/w-d-xo.html .The comparison for the trigger buttons starts at 14:07 Hope ExtremeRate will see this. Thanks !
can you send me a link for the proper triggers so i can install this ive been trying for 2 weeks+
What I found out, I cut the plastic that they did in the video and my triggers didn’t work, tried other triggers without chopping the plastic and it worked!
My L2 and R2 inserts keep poppin out. Mines is a JDM-055 so this shouldn’t be happening. Can anyone help?
I have the same problem 😪
Hey! It would be really cool if you sold this but just for the dpad, I love the rest of the default ps4 controller but the dpad is terrible and I wish it was clicky
Thx for the tutorial.. Just installed this kit with the Thumb gear and OMG, game changer!! Never going back! Might mod a couple more controllers It think!
Hello, i suggest to make the sensors which detect inputs on the new "clicky triggers kit" board larger because they tend not to pick up the inputs if you press the front buttons at the edges. It would be a perfect custom then ^^
Thanks for your suggestion, we will look into that!
@@ExtremeRate hey did you make the sensors any larger ? :P
Why didn't you separate the R2 and L2, I don't want that for my racing games.
Only thing you can do is have a spare pad. That's what I do, one for FPS and one for GT7
I cut the long rectangle at L2 and R2. Thus the clicky keys work. At the control cross and the buttons I left the rubber, which the two attached to each. However, you have to cut out the holes first, which is very easy, since they are practically given. Everything works. Thanks for this kit and I hope I could help.
I have a question, so on amazon it says its only compatible with model CUH ZCT2 but i have model CUH ZCT2U. will it still work?
Okay, i did this and... My PS4 controller went orange and blinked 3 times and it doesn't connect. I'm using the CUH ZCT2U controller, and i didn't sand or clipped the triggers. Is that why my controller is only showing orange light instead of white light? Or is it other way around, i don't wanna lose my controller...
Does it work with the Dawn 2.0 FlashShot Trigger Stop Remap Kit? Thank you!
Hallo, mich würde interessieren ob man dieses Klicky system mit der Schale Decade Turnier Control DTC in Verbindung zusammenbauen kann!? Ich weiss da sind schon Triggerstopps verbaut aber die sind mechanisch und nicht Clicky. Vielleicht kann mir das bitte einer beantworten, nicht das es Kurzschluss gibt wenn man die Schaltungen über einander legt. Man kann ja bei DTC die Triggerstopps Mechanik verbauen aber lässt sie einfach in einer Position. Geht das?
How do I access the clips no the home button I’ve been trying for over 2 hours mine just don’t wanna pop this is my first controller I’ve done so Idk if I’m being too cautious or
Edit got it open everything good but triggers l2 constantly being pressed and click sound in either
Just finished installing the kit. I went into madden and when I press my bumpers they switch inputs to my keyboard and make the game weird to play. Is there a way to fix this? Is that what the bumpers do?
Edit: My right bumper is right click and left bumper is left click. Is there a way to fix this?
Sold out? 😢
Idk why but it doesnt work😢 Help me please!!
Finally you've completed the kit for the PS4, three months later but I'll buy this and add my paddles systems or your on top of it, thank you I've been waiting for this for some time now ☺️ happy now it's available for the PS4 controller.
Thank you so much bro! :)
Is it possible to install all but the triggers on this kit- leaving the analog triggers while installing the clicky bumpers?
no, you can see you would need to put the 2 flexibles circuit boards one over the other, cut the modded flexible circuit to get rid of the triggers contacts only.
So it's not sure it would fit, and it's not sure it would work at all.
I need to know. Can I use Clicky kit combo with DTF led kit together?
Olá amigo, sou brasileiro e gostaria de saber se você tem esse kit para a versão 1 do DualShock 4, eu tenho dois controles, a versão do ps4 fat e a versão do ps4 slim que é igual a do vídeo, gostaria de por o kit nos dois controles mas vejo no ali express que vende apenas para a versão do slim, você teria o kit para a versão 1 também ?
I installed this on a previously working remap kit controller. I'm having an issue where the remap isn't working on this clicky board. I get the blue light on the remap and the light blinks to confirm I've set a mapping but then after exiting the mapping function, the newly mapped button doesn't work on K1-K4 anywhere.
Why does the new clickyhair triggers 3 mm and the old ones 1.5mm
i just want to press the clicky button at the abxy and d-pad buttons.
L2 R2 L1 R1 keep the original dualsock4.
Do you have this type for sale?
thank yu sm i was struggling so much this rlly helped alot
thanks so much this was so easy to do this it helps so much will be subscribing
Ps4 usb c mod ?
Can I purchase a mod chip because I want to install back Buttons along side with this trigger system.Its possible?
Yes!
Is it possible to install this kit without modifying the triggers, so they have their full analog range?
It was so stupid of them not to make a face buttons only kit for the dualshock 4
I bought this exact kit and the trigger inserts will not work. They keep popping out. I double checked to make sure i got the right kit and i cannot get them to stay in
same did you find a fix?
my controller will not turn on after any idea why?
i bought the extremerate trigger click kit and somehow i got stick drift on both my sticks
can someone help me
What is the reason for clipping the points on both triggers ?
Hello, excellent tutorial. Before I purchase, is this compatible with SONY 3001538 controller?
My R1 and R2 both are hitting the button but aren't working. Not sure if there is any way to try and fix it before i return this
Someone else mentioned it, but I'll pass it along: If your L2 and R2 buttons aren't clicking because the little clear pieces aren't staying in, use an OLD controller's L2 and R2 buttons. I assume like a gen 1 controller you might have gotten in like 2014. Worked well for me. But honestly Extreme Rate should do a little better pop
YOU HAVE SAVED ME A LOT OF ANGER AND PAIN. My L2 R2 were just holding down the trigger. Went and fished out the old old L2 and R2s and it fit like a charm. Thank you good sir!!!
@@SorryRumHam My pleasure!! 👏👏
do i cut the clips for it tho??
@@faded_yt5845 The clips as in the two hard plastic pieces on the two triggers? If it's an older gen 1 controller you shouldn't need to do any cutting or modifications to them. That was just what I noticed from limited examples I had laying around though
@@KryptonianChaos1so can i takw out the triggers for my ps4 controller that came out on release date of the ps4?
The triggers feel very stiff and resistant, and just wanted to know if that is how they are supposed to be
Just installed mine works good so far.
7:03 does it come with this and also do I have to do this
Can i use the PS4 whole clicky kit with the Split D-Pad Buttons (SDP Buttons) for PS5 for PS4 Controller?
Yes!
My L2 and R2 are not click and i did all the steps for it the rest are click but the L2 and R2 dont is there anyway to fix it?
Same thing happened to me with my jdm 55 controller. I bought jdm 001 triggers and it worked
Is this compatible with the scuff infinity ps4 the normal versión?
También sirve los gatillos para el Edge?
The triggers don’t work at all and has ruined my controller please help!!
you need to sand the transparent parts
@@Rift103 THANK YOU SO MUCH I WILL TRY STRAIGHT AWAY
What i hate is everywhere i find information how to assemble but not what/how/why this product works.
Just got your product and I love it
There needs to be one with just face clicky buttons, any driving game is a night mare with trigger stops
Is there a way to reduce the tolerances with the face buttons? Maybe Filing the rubber pads inside the buttons could help? They feel very stiff once the controller is closed with your full clicky custom.
Can I put mouse kit and dawn map kit?
Idk if i read this somewhere correctly, but is it true that with this kit you cant use L1/L2 or R1/R2 simultaneously?
Is it compatible with v1 controller?
Good vid🎉
Bought kit, did sanding of the slots, cutting pieces off the l2 and r2 as well, I am finally getting the click but no response in game? Is it a bad kit? Or do I need to sand down more ?
My back triggers are not clicking
sand them down
Hello team ExtremRate, does the clicky kit work in combination with the decade tournament controller kit ???
do u get that blue thing in the box?
Hello. Do you just happen to sell click pads instead? I tried this, right trigger got stuck, tried to cut, trigger piece keeps falling out, and can't really adjust it without the pieces falling out. Tried to mimic everything done in the video. If you have a dull functional click pad with solid triggers for sale, I'd like to buy one thank you.
will this work on of brand controllers?
this is an absolute must have for fighting games especially when paired w/ the sdp buttons. will definitely be purchasing another one for my spare ds4 controller. are you guys working on omron switches in the near future?
Thanks for your feedback! The space inside the PS4 controller is just too narrow, so it's not possible to use the Omron switches if we don't break the front housing.
lmao i just got the same for FGs. clicky w/ split dpad. it's an absolute game changer. now i can wavu at hyper speed.
@@Daylen151 bro for some reason when i install it the buttons are just stuck
Can you guys make and adapter to put Omron Micro switches in the triguer plasee?
We are working on the solution for both PS4 & PS5, we will try our best to work it out!
@@ExtremeRate 😻😻 im waiting
Did anyone have trouble with the d-pad being too tight when it's fully closed?
yeah Im having trouble with that, did you ever figure out a solution?
i have the very common down arrow problem not working on 2 controllers, could this kit fix that
Yes it can
I was wondering though, would this work with the decade upgrade kit though for ps4? If anyone has answers, I'd like to know!
I don't need the clicky kit for LR12, is it okay to cut it out?
The triggers are 3mm stop vs the original one with 1.5 mm stop why is that?
Because we used the silicone tact switch, it will make the switches press/sound like the mouse click.
Is this reliable for heavy use on fortnite, if so definitely gonna bye one
Do you need to cut the clips off?
Will this work if you already have the led kit installed. I'm considering buying this
Yes!
I already have the original clicky kit but I'll be putting this is my Decade Tournament controller.
:D
Aww man I just got the v1 clicky trigger. I don't know yall came out with a newer version. But has a little weird play for R2 button. It gets stuck sometimes.
Please refer to this video to fix the issue bro th-cam.com/video/S-Uj-kRYPW4/w-d-xo.html
My d-pad left and right buttons in 2 weeks of intense use in tekken7 aren't clicky anymore and seems barely functionals..... It's sad because it was very good to play with when new...
Sorry to hear that. Please contact our customer via email at info@extremerate.com, we will help you.
can a dawn 2.0 kit be added to this
I NEED a Nintendo Switch Pro Controller version, like, now
I just installed this kit on my PS4 controller, bumpers and triggers feels good they are very responsive, but face buttons feel a little hard to hit, I don't know maybe it's just me. specially if you play claw like me, I use my index finger to press all 4 right face buttons and my finger hurts with these type of buttons, I like better the regular face buttons because they feel soft, clicky feels good but hard to me personally, if I had known I would have got only the bumper and triggers kit, I kinda regret 😅
Thought I was the only one who felt this way lol, my index finger started hurting after a while
well i was thinking of getting this but now ur makin me think on it😅
I will be building a controller later today with back buttons, L2/R2 hair triggers and the clicky buttons, which should I install first?
This WHOLE clicky kit is face buttons and shoulder buttons in one piece, so if you purchase this kit, don't purchase the clicky triggers kit again. If you combo the back buttons kit and the WHOLE clicky kit, you have to install the WHOLE clicky kit first.
@@ExtremeRate I aready have the DTC but I want only the triggers for the bumpers since l2 and r2 are already smart triggering. What can I do/what would you recommend?
Is there one that only has clicky face buttons
Sorry, no
Why did you change that circuit Board/foil thing? I understand mechanically altering the controller by clipping things off or stuffing stuff in.
And (why) are they tactile/clicky?
The foil thing is a membrane with button pads on it, its the physical sensors that connect the buttons to the motherboard. The replacement membrane has clicky button sensors instead of soft rubber ones; you're literally changing the mechanism inside the button.
Can this be used with the DTF LED kit???
All of the pieces are included in the "whole clicky kit"?
The whole clicky kit means making the 8 front buttons (dpad and the right 4) and 4 shoulder buttons (L1 R1 L2 R2) clicky.
@@ExtremeRate great I just ordered today.question can I install the clicky kit and the dawn kit on the same controller
Still think this would be a great idea for the Switch Pro Controller, im definitely trying this with my spare PS4 controller
We are looking into the Switch Pro controller and hopefully will make something ;)
Does the back button mod work with this mod
Just installed this kit & I love it
Just wished that the back buttons on the DTC kit would feel the same, buttons on the DTC kit are kinda hard to press specially k2 & k4
Thanks for your feedback. For the design of K2 K4 on the DTC, we will avoid that structure/mechanism in our future back buttons kit.
I already bought both kits separately. And installed them unless this is a new version. This is pretty cool.
Edit: oops I thought this was the ps5 controller.
haha, if you still play PS4, don't miss it
is it possible to cut of the switches for L1 R1 L2 R2 and use only the face button?
Technically you could but you wouldn’t be able to use the R1/R2 L1/L2
@@BERSERK61909 I'm using a battlebeaver and its already covered in their mod chip, just want to make sure removing it will not ruin the whole thing :D
So, would you guys ever consider releasing just a face kit for the DS4? The clicky kit released for the DualSense only covered the face buttons and I’m wanting to do something similar with my DS4.
I only want to mod the dpad and face buttons.
You can just cut off the shoulder buttons part from this kit, and during the installation, don't take off the original conductive film from the controller, just lay the cut clicky kit on it, and also don't install the 4 tiny plastic inserts into the L1R1L2R2, and then that's the result you want.
Did you ever do this?
I want normal Trigger buttons too, but idk if stacking the boards would actually work
@@MikeLaRock88 I only ever bought the face clicky kit for the DualSense. Never bothered with it the DS4, though I should look into that.
But to be fair, I probably won’t. The switch for ‘up’ on my d-pad broke for the DualSense face clicky kit after just a few months.
Just bought this,havent installed yet,would be cool to have a kit to convert from micro-usb to usb-c,this pad is one of the best,if not the best for fighting games,micro-usb sucks,nice all these mods are available,why should only arcade sticks get all the cool mods?( I actually play both,but pads are more nostalgic to me)
is this useable in addition to an already installed LED kit?
Can you use this kit with the dawn remap kit?
Yes you can
What does the clicky kit do?
What the video
What the gaps doing?
Make the buttons act as mouse buttons
With this will it still work with Bluetooth
Yes
Can I use this kit with the dawn remap kit?
Problems… I today installed the full clicky kit on the standard PS4 controller exactly per tuition video. But the spacers inside the L2/R2 buttons are too big, so the buttons stick on at all times. I note a few others had same problem… what’s the fix? Do I need to re-engineer / file then down myself, or do I write off the controller as a result of a bad purchase…? Little annoying…
Headsup: I combined this with the DTC kit and Split D-Pad. The tolerances for the Split D-pad and the clicky buttons are a bit too tight that when the case is fully closed, they press down on the directional buttons. Had to use the OEM d-pad.
Thanks for your feedback. What color of the DTC kit you've purchased?
@@ExtremeRate i bought the black DTC kit and the black SDP buttons
@@EdMarcelino We will test it out
Can I include the eXtremeRate DTFS LED Kit?
Idk
Just to let everyone know you have to get old triggers from an old controller instead of a new one that's why it's popping out I apologize for the brand just a weird way to do it and for people who have old controllers grab your triggers and switch them out cuz the new ones ain't going to work.
You sir are a GENIUS. I took your advice and it worked. I don't technically understand why or how it worked, but the transparent looking pieces definitely stayed in place. Thank you so much
What Jdm model? I have a 055
@@InstinctX93 just use an old model triggers from the first PlayStation, apparently that's what the design was for.
Just take a bit off the time everthing works i have done it whit old and New controllers
Or, just use a drop of super glue from the dollar store. Worked on my three controllers.
Do you have to clip the edges off the triggers
Just follow what we've do in the video :)
Thank you I am doing this right alway
You are most welcome!