ไม่สามารถเล่นวิดีโอนี้
ขออภัยในความไม่สะดวก
How To Put Your LG Front Load Washer In To Self Test Mode | Diagnostic Mode
ฝัง
- เผยแพร่เมื่อ 8 ส.ค. 2024
- This self test applies to most LG's Made in North America
Support My Channel!
Love My videos? Help make this my full time job by donating to the Channel.
Free 30 Day Amazon Prime Trial: amzn.to/3Gw9qiO
Buy a Tee Shirt: lorainfurniture.com/product-t...
www.paypal.com/cgi-bin/webscr...
Support Me on Patreon: / lorainfurniture
![บุษบา - มอส รัศมี [COVER VERSION]](http://i.ytimg.com/vi/_n0yENSl8d8/mqdefault.jpg)
![[ไฮไลต์] เจ้าฟ่าง ธีรพงศ์ ศิลาชัย "คว้าเหรียญเงิน" ยกน้ำหนักชาย รุ่น 61kg | โอลิมปิก 2024](http://i.ytimg.com/vi/981lYv1AwKk/mqdefault.jpg)
I watched this video until the end for curiosity since he was doing a self test on the front loader, and I will tell you it was a very good video, no BS loud music people blend in their videos, good instructions step by step, to the point and effective in delivering the message, I felt I did not waste my time.
So true! This video has been my "golden" go to video! I have been my own "mom the builder" 😁🥰
Mine started to work after going step by step with him. Thank you
Been bouncing around the internet all night trying to diagnose a problem. Was about to order a new machine altogether. Found your video and am so thrilled. Will be ordering a new drain pump thanks to your wonderful video. Thank you so very much!
1st press = Clockwise rotation (1:15)
2nd press = Low speed spin (1:41)
3rd press = High speed spin (2:04)
4th press = Pre wash inlet valve (2:43)
5th press = Main wash inlet valve (3:19)
6th press = Hot water inlet valve (3:30)
7th press = Bleach/Spray rinse inlet valve (3:42)
8th press = Counterclockwise rotation (4:00)
9th press = Heater/Thermister check (4:10)
10th press = Circulation pumps (4:52)
11th press = Drain pump (5:19)
12th press = Full shutdown (6:20)
1E or IE = Input fault
0E or OE = Output fault
5E or SE = Motor sensor fault
FE = Overfilling fault
PE = Water level switch fault
DE, DE1 or DE2 = Door faults
LE = Locked motor fault
UE or Ub = Unbalanced load fault
PF = Power failure
CE = Overcurrent fault
5ud or Sud = Sudslock fault
tE = Temperature fault
Thank you so much for that!
Awesome summary. Thank you.
I have P5 error,I know nothing about this error code,can you help me?thank you
Years later…..Your video is a great help! Easy to follow and descriptive. I was able to figure out what was wrong with my LG washer/dryer combo with your video. Thanks so much for sharing your knowledge!
I am SO appreciative of this video!!! My machine packed a sad on me and I was panicking!!! This worked!!!! It took me a hot minute to figure which was my "soil" button as it is different but I got there!!! Thankyou. Thankyou!!!!
This is one of the best videos I have seen that gave me information on doing a problem assessment for this washer. I am glad I found this and will continue to monitor this channel. Thanks again for this excellent information.
Thank you very much for this video-aid! Your instructions helped to clear the dE error and get our washer back to "normal".
Absolutely fantastic video presentation and explanation, especially for the meaning of any codes in display screen. I only wish I had come upon this self diagnostic test earlier before spending about $75 dollars on a drain pump and cold water inlet valve. Unfortunately my main power board went.
Thanks to your video, I was able to change my drain pump for $33. There were a few differences, but nothing I could not work through easily. Thank you! Thank you! Thank you!
Is that instruction in this video? I may have to replace my drain pump.
Thank you so much. I had a tech come out and look at it a few weeks ago and nothing. I came across your video trying to see if I could run the diagnostic they did and it worked! Now I can tell them exactly what's going on.
I want to say Thank You! Your video help me diagnose a bad pressure switch. Once again Thank you!
Thank you very much! Often when there are issues with appliances, I’m stuck wondering where to start. This is a great place to begin.
Test sequence:
1 Tumble clockwise
2 Low speed spin
3 High speed spin
4 Pre-wash inlet valve
5 Main wash inlet valve
6 Hot water inlet valve
7 Bleach/spray rinse valve
8 Tumble counter-clockwise
9 3-second heater, thermistor check
10 Recirculation pump test
11 Drain pump test
12 Exit test, off
FYI if step 10 dose not happen and goes to step 11, means the machine dose not have a Recirculation pump. Would of been nice if the store where I purchased would of informed me.
in step 3 i get loud noise and squeals and the rpm drops down but no error code can you please explain
Thank you. Your test tip saved alot of time. I had no idea that could be done.👍
I just want to thank you for helping with my LG washer, the problem is fix, I Appreciate it very much.. God bless
My washer was noisy at times. For me it ended up being the recirculation valve. I was able to isolate using your instructions. Thank you.
Notes in case some runs into the same problems with the test as I did.
If you washer has water in it and won't drain. The washer will not spin during the spin test. You have to drain it first. Also it's a pretty good indication it's the pump
Thanks for the video. I was able to identify the problem fairly quickly
I found same problem, it was the pump
Hello, when you did the diagnostics, did the machine shut off at step 10? Mine is turns off at step 10, which is the recirculating pump but when I search for recirculating pump for my model ( MODEL:WM3170CW ) it does not have that part. So does it mean it’s just the drain pump?
@@mowax89 I don't remember off hand how many steps there were. If you don't have a circulation pump, then you won't have that step
You just saved us so much money. You are an Angle! We love you! Thank you!
i wonder if he's an obtuse angle or an acute. Perhaps a right angle.
@@Kenpachi69420 idiot you know what he meant..🤣
@@Kenpachi69420 Triangle
Just fixed my washer thanks to this video. Thank you so much.
Thank you! Watched your video, ordered off your link and installed. Definitely saved myself $300 at least. My model has a few more features so my pump assembly had a couple more hoses and was held down by 3 bolts, no clip. Other than that the hardest part was the ring that held in the rubber gasket.
Thank you very much for this video. Because of this, I discovered that my issue was with the circulating pump. That was what was making the noise. Saved me a ton of aggravation and money.
It is happening to my lg , a noise and it doesn't pump out the water. what did you do to solve the problem?
@@manuelbuizatarrida5953 hi. My issue was to change out the recirculation pump which I did. I am not sure if that is the same pump that also empties the tub or not. I want to say it is a different pump that empties the tub.
@@ErolEskinazi THANK YOU VERY MUCH,
@@ErolEskinazi I think mine must be the same pump for circulation and to empty the tub. Mine makes noise on test 2,3, and 10. Mine only had 10 test not 11.
For those who run into this issue. The spin test will not work if you have water in the machine. You have to drain it first.
You do a great job making these videos. Very informative and concise. Thank you.
Awesome pace, explanation and great video quality. Thanks for the upload guys.
Extremely helpful, useful, and informative. Thanks a lot.
I love the LG 14 kg washing machine! Good, you're testing!
Thanks so much. It worked exactly like you said. Even a most simpleton of simpletons could follow those directions.
Thank you!!! great voice. Good pace. You did wonderful.
Many, many thanks! Our WM3270CW somehow was locked up, with the pause button flashing and the selector knob illuminating all choices. Ran the diagnosis and it reset to working as usual.
Totally helpful after repairing a scrubbing rotor. Thanks.
Awesome video, helped me because I was able to follow along step by step with you. 💯
This is not in the operation manual. Thank you showing that this can be done and how!
Excellent, clear, step-by-step video I'm so happy I found BEFORE I start taking my machine apart. In spin mode, my Lg inverter direct drive front end loader sounds like a wicked, noisy 747 with a slight clunking sound. Thought perhaps my kid or husband left bearings in their coat pockets and they launched in the machine's tumbler! Nope. I have removed the upper lid and motor panels, checked all tubing and the hydraulic arms attached to the tumbler for any obvious, visible issues. None. I will try a machine self test tomorrow....will see if the Lg washer is able to dx its own problem while in spin mode. Holy spin cycle speeds too! Thanks so much for this video and such a relief to not have someone "umming" and "ahhing" thru it all with unnecessary prose! Well done!
I just wanted to stop back with an update. I replaced the drain pump and my LG front load washer is running great again thanks to this video.
Was your washer not draining? Ours does a spin cycle endlessly. Sometimes the time reads 6 minutes and 20 minutes later it is still spinning.
@@postprod09 Hi. Yea suddenly our washer would not drain. After replacing the pump it worked great. Was really an easy job when you take your time. Have a great day.
@@EdwardWallaceTechTalk Oh ours is draining, it just gets stuck on the spin/rinse cycle FOREVER. Not sure if this is a drain pump problem.
Ours was not draining so never went into so in cycle.
@postprod09 mine gets stuck on the spin/rinse part of the wash. it usually happens when the machine is fully loaded with clothes. sometimes it takes so long it just gives up and shuts off. it also will occasionally leak water from underneath (which is driving me crazy! 😡). I’m considering just changing the pump myself in hopes of solving the issue. did you happen to diagnose and solve your problem?
Thank you! i have the same model and worked as expected.
Hi! I have the same washer and the extra high speed button does not work, does not turn on, what can it be??
THANK YOU SOOO MUCH!!! WORKED EXACTALLY LIKE YOU SAID!!!👍👍👍👍👍
Thank you, sir, it's working once again. :-) Excellent instructional video.
Thx for the great info!! Is there a way of testing the fabric softener water feed? Mine does not empty and all holes and tray are clean. thinking water isn't going into the dispenser when required. Thx again
Excellent video. Thanks for taking the time to do that.
Hooray I just came across this video. I have an older LG washer and The tub doesn't spin or is very difficult to spin. I mean spinning it by hand? is the motor burned out?
Hello Eugene my washer don’t do it the second and third step what I can do
Thanks for your video, I agree with everyone that has responded. It is the best video out there
I was not able to get through all of the cycles. I did this test twice with the same results just to make sure.
The differance with your test and mine is when I started the test my screen displayed U37 and D72 any help is appriciated
Test sequence:
1 Tumble clockwise
2 Low speed spin
3 High speed spin
4 Pre-wash inlet valve
5 Main wash inlet valve
6 Hot water inlet valve
7 Bleach/spray rinse valve
8 Tumble counter-clockwise
9 3-second heater, thermistor check ( not sure this happened)
10 Recirculation pump test ( The washer shut off)
11 Drain pump test
12 Exit test, off
Same, after step 8, mine goes to 11, where it drains and then next button is shut off. Can't test the recirculation pump. Anyone have more information?
Great video - concise and professional. thanks!
Thank you for making this video!!!! Very helpful.
Great video. Very clear and at the right speed so I could follow and write down the information for each step. Thanks.
Do you have a diagram that shows what hose goes to what port of the detergent dispenser from the main water valves. I took the dispenser off and not real sure if i put 2 of the hoses back into their correct spot.
Thanks great video I followed the video and it helped along with cleaning the filter
I wonder which one is the best ventless dryer you would recommend? Thank you.
Thank you for this video. Is there a sequence to use to fill the tub with more water on this model?
I have an LG Front Loading Washer WM2701HV and when I turn it on it will either work or the display will flicker. It is very intermittent and I never know when it will happen. I have done a reset on my washer and sometimes that fixes it, but many times it just flickers and will not allow me to push any buttons. When I put it into test mode the display is flickering. Have you ever had that happen?
Bought me the latest "LG Direct Drive 8 kilo Inverter" I thought a normal Cotton wash ,rinsing, centrifuging should last not longer than one hour.
Yet when I choose a normal "cotton" wash , the digits on the panel show "5 : 35" , that's over 5 hours !
Did me a few washes and I had to stop the machine since it was stuck at the first washing cycle for over two hours. !
How do I set the time for a regular 3 kilo "Cotton" wash ?
Thanks for this video. I found this video very informative.
Very helpful video .. its a pitty mine is an earlier WD1049c ... controls in different locations but Im sure it has a diagnostic mode similar, just founf no info sofar ...
Great video.
255 is a binary digital scaled computing value.
It represents the maximum value out of 256 values that can be represented with 8 bits (0 - 255). 255 would be completely empty, 128 would be half-filled, and 0 would be completely full.
192 would be quarter-filled
Very good test run. Thank you.
Great video. Thank You!
Is the recirculating pump used during rinse cycle?
Incredibly helpful. Thank you.
Great video. Is there also to put my LG DLGX8101V dryer in self-test mode? Thanks
Thank you for this concise video!
Hi I know this video is old. But until 2021 it has become very handy to us. Do you have another video explaining what happened (need to fix) when the number don't move when you adding water and the spinning cycle?
Hi Eugene, LG front loaders have so many movements. Would you be able to show a Handwash Cycle?
I have a new 3900 model. I ran this test and it’s displaying nE at the end. I think it came on during the spin tests, but the rpms matched yours. I’m hoping it means “no error”?! Thanks!
Thanks for the tip…. So my LG WM3070HWA does not do steps 2 and 3. Everything else worked. Any ideas what it can be??? Other videos said it could be the Washer Motor Stator with the Washer Drive Motor. Was thinking of just replacing both and hope that’s what it is. Any ideas????
Thanks very much for posting this!
Thank you for helping me confirm that it is my drain pump. Very informative video. Now can anyone tell me the best place to buy a drain pump?
Thank you. It's a big help.
I change the heater thermistor and it still says TE do i have to change the temperature sensor it does let me do a self test
Thank you for the walk through.
I ran test mode and on test 10 where the drain water frequency should start to go up ej. 340 etc. mine doest go up at all and stays at the same number any thoughts?
I couldnt switched on diagnostics regime my lg 6.5kg, Fh2G6WDS5.
It is sencor screen and I couldnt push 2buttons together-spin and switched on.
Is it a problem or this rule is not for all LG machines?
Do you think is it a problem?
i would like to ask about repairs. Is it fixed at home or do the repairs need to take place at a workshop?
How do you test if the water level is correct during a normal wash cycle?
Great video and great info, thank you!
My timer was stuck at five minutes. Did the diagnostic sequence and it ran normally afterwards. Thank you.
I have an issue where the drum fails the 3rd test, stops itself before reaching high speed, any ideas why?
Awesome. Used this to verify functionality!
I have the same washer as tested. My problem is after washing finished and clothes removed, a day or two later water fills in drum. I've had drain motor replaced after it failed, but water in drum continues . Any ideas?
Thank you for the video, it was informative.
But wish to know if the drum rpm is rotating as per the specifications.
In the display, there should have been 2 readings as specification vs actuals, this could tell us if the drum is stuck with scales and needs cleaning.
Hope the above has sense.
Thank you! You saved my life!!
Thank you so much , great video
Thank you awesome video.
This was helpful. Well done. I have a 2008 LG washer with a different display screen. However the 11 part diagnostic test is identical. I quickly determined that the prewash and main wash inlet valve test failed and resolved the problem. This diagnostic test is not in the LG ownwers manual.
martin xl how did you solve the valve problems?
Did you have to replace the inlet valve?
I’m curious as well!!
Me too
He must be dead. 🪦
Please tell me, my grandmother washes the jacket, what program should I press the jacket, if there is no program for bulky things?
Hello Eugene. I have a WM8100H*A LG. Ran the diag test and everything worked fine. Loaded clothes in it and it won’t fill. It’s been acting odd for the last few loads (not filling) when you hit start. It would work if you cycled the power button a few times but now it won’t even do that. I’ve checked the incoming pressure and filters and they were good to go. Less then 9 months old and I’m at a loss. I’m thinking inlet valve but why would it fill in test mode and not the wash cycle?! Neither hot or cold works. Thanks for the great video!!
Great video, drain humming but not draining, no error code. not clogged at strainer basket. model WM4270HWA
my WT1101CW does the same thing
mine displays nF when doing the fast spin and the number 115. is that ok? and towards the end nF on display again and I had to manually turn it off
all the Lights come on the dile turns but it does not select a program it i about 5 years old does is mean it is the control panel ?
Replaced drain pump after diagnostics step and blew out lines and got air through to bubble water in tub. Never get anything out the drain hose. Have to pull filter. Still will not drain so it won’t finish a cycle stuck at 12 min. Where should I look next?
OUSTANDING!!! Thank you brother. Water inlet valve inoperable in my trusty LG. I've subscribed!
When it active inlet valve, then machine will start filling Water?
My washer is giving an unbalanced load error. I've emptied it, and then put only towels in, but I still get it. Also, I unplugged/plugged it in. No luck. Thoughts?
broke my washer put in clothes and did spin and 1 one the suspension springs came off but its fixed now and its fine
Need a washer. Last one lasted 25 years. In an apt for single person but want to be able to wash blankets. Never had front loader. Is it better than top load? Recommendation please. Thanks.
And another question, my grandmother erases the curtain, which program should I press?
Thank you. Excellent video.
Very detailed. A huge thank you
Do I still need to test my washer, it just unbalance and gives a code ui or ue
My drum won’t spin at all in any of the steps keep getting a LE code in any of the tumble speeds. The drum try’s to spin but the motions are jerkey any idea
Thanks John
Hello. in the case of LG washing machine [model: F1K2CS2W], it would not start and had blown the fuse from the central electrical panel. when i disconnected the lg reaktor (5874ec2002c) the fuse did not blow. is this the problem? how can i measure it to be sure that is where the problem is. Thanks....