Cura Support Tutorial - Support Tips and Tricks
ฝัง
- เผยแพร่เมื่อ 15 พ.ค. 2024
- This video has everything you need to know about Cura's support system, from per model settings, to printing a model AS support, to custom supports, and support blockers. learn about the support interface, and how to best utilize curas support sytems for your #3dprints
Like and Subscribe!
Find This Item and More cool Tech Like it at:
www.amazon.com/shop/technivor...
SUPPORT TECHNIVOROUS 3D Printing:
TeeSpring Technivorous Merch!
teespring.com/stores/technivo...
become a channel member for youtube perks!
/ @technivorous
Paypal: Vanethrane@gmail.com
Check out my Patreon page: / technivorous
or you can buy me a coffee: www.buymeacoffee.com/technivo...
Current Channel Goal: 50,000 Subs!
Want to send me something?
Technivorous
902 n Hughes
Blunt Sd 57522 - วิทยาศาสตร์และเทคโนโลยี
Tree support is so helpful, thank you so much!
SUPER helpful, thank you so much.
I love watching tutorials when the person talking thinks the person watching knows what the heck they're talking about right from the beginning.
and i love that not all tutorials are for complete beginners, so that you can learn more than basics.
Thanks for this!
thanks for this video! im new to cura and you couldn't of explained this any better
Very much thanks for the info! Helped me a lot.
Great info, thanks.
SUPER HELPFUL!
Very helpful for those of us who are just getting started.
No matter how thin I make the roof and the points of contact between a model and support, it never comes off easy. I always break the model chipping the support off. Any tips mate? Great video.
No homo. Ily. You helped me newbie like me out !
Thank you.
That was a great help, thanks man. Don't forget to smash the like button fellow dudes and dudets
HUGE thanks, i had about 9 fails before this video thanks
Thanks
Its amazing how slow the view port is even on a very powerful computer. Cura really needs to work on their optimizations for the 3d viewport.
I have a profile that has all settings visible, I use this profile for checking settings out without spoiling my main profile.
Ss Great. I am using Cura 5.2. My supports just weld to my print. The only way I can get them to remove is by using my 1000F heat gun and heat up the supports until I can pry them off. Very frustrating. You brought up one thing I did not think about. Is, one Wall supports. I wonder if I can print any other type of support other than tree supports with a single wall? I think/believe that CURA 4.x actually did something similar. I only tried Cure 4.x a short while before moving on to Cura 5.0. But I recall the supports in 4.x being much much easier to remove.
Can support in cura can be decrease?
So what is the quality of the part that are supported
Where can I find that hand stl?
i need to know about the support floor, i don't really know how to use it
I dont see the supports in cura when I have them on..
My supports are fusing with the printing model. Is that a problem?
I have a problem when I load the STL model the side menu is missing and I am unable to manipulate the model.
Can you please help.
i got a bad bottom layer when i remove support from bottom. solution?????
I see support is inside model how would you block that?
+1sub, thanks you so much
on the Ender 3 s1 pro it doesn't start overhang drooping until 70 degrees.
how to print large items on 310mm310mm 400mm please.
In Cura 5, I click on the object and the blockage does not appear. This is some mistake Cura?
I'm new in 3d Printing not modeling :) But when I use tree support in dafault settings the tree support stack to madel! And I drop model in trash :( With normal - ZigZag all was OK !
I have generate support enabled but it doesn't automatically add support for me?
Can anyone point me into the right direction. My supports are attached way to well everytime I get a large print done I get supports I can’t get off and end up braking my print trying to remove them
The issue that I am having is that whatever is touching the supports looks unfinished. The entire model looks perfect but once you pull the supports off it looks like a bunch of lines that you can pull on. I have tried changing how the model lays on the build plate to be printed and same outcome. Only issues are where the supports touch.
try sanding
you ever figure it out? im currently on this video looking for that solution
I just can't figure out how to display the support buttons that everyone has
Is it possible to edit the tree support to move where the base is and how it curves to the model? I'm trying to print a wolf head and the tree base starts right in it's mouth and the support is unbelievably hard to remove and even if you manage to do so, it leaves a real ugly finish. Basically, what I wanted to do is to use the bed as the tree support's base rather than the model being the base of the tree support.
Did you try enabling the optioning "touching the build-plate" vs "everywhere" in the support options?
How would you elevate the part? I have a stippled surface and laying it flat defeats the purpose. I want to have to elevated slighly and supports as the “bed”
Change the Z position of the part in your slicer
The confusing part for me is that I am using Cura 5.5 and I am guessing you are using something earlier, I have no experience with any version but 5.5 your interface is way different than mine so to follow on with the stream is very difficult for me... Anyway thanks for the good video on this topic as I am having fits with a particular bunch of models for Legions Imperialis, specifically aero type models and supports...
my version was actually lower in this video.... the extra settings can be turned on and off in the settings, and i have a few helpful extensions that change the interface a little. i will make a generic version of this video for the latest cura
@@Technivorous Thanks much brother...
my supports are better saves tons of time but is not in cura i have to model one instead
I couldn't find TREE as an option. I've been using zig zag and seems ok but always looking to speed up my prints
In lower versions, tree support is under expiremental. If you can't find it, type in tree in the search bar above the settings you see and it should allow you to activate it
there a way to support inside model and not the outside?
Technically the inside support is the infill.
@@Technivorous am wanting to hollow the print but there is over hangs in it
@@jamessmallwood7448 Then you may want to look at reorienting the model itself. I don't know what exactly you're printing but that may help.
i dont want support at all and it always creates support. cura just crap ton of bug. it never able to put 3d model as support. how latest version worse than 2 years ago
Since you didn't show the printed model, I have to assume none of it worked.🤔😁🤘🤞
On the contrary, this piece is on my mantle as we speak
@@Technivorousyeah right
dude no one needs a video to read what it says. SHOW what each option actually does. this is not helpful at all.
for me i dont have those options s